Can Euler deconvolution outline three-dimensional magnetic sources?

Severe limitations of the standard Euler deconvolution to outline source shapes have been pointed out. However, Euler deconvolution has been widely employed on field data to outline interfaces, as faults and thrust zones. We investigate the limitations of the 3D Euler deconvolution–derived estimates of source dip and volume with the use of reduced-to-the-pole synthetic and field anomalies. The synthetic anomalies are generated by two types of source bodies: (1) uniformly magnetized prisms, presenting either smooth or rough interfaces, and (2) bodies presenting smooth delimiting interfaces but strong internal variation of magnetization intensity. The dip of the first type of body might be estimated from the Euler deconvolution solution cluster if the ratio between the depth to the top and vertical extent is relatively high (>1/4). For the second type of body, besides dip, the source volume can be approximately delimited from the solution cluster envelope, regardless of the referred ratio. We apply Euler deconvolution to two field anomalies which are caused by a curved-shape thrust zone and by a banded iron formation. These anomalies are chosen because they share characteristics with the two types of synthetic bodies. For the thrust zone, the obtained Euler deconvolution solutions show spatial distribution allowing to estimate a source dip that is consistent with the surface geology data, even if the above-mentioned ratio is much less than 1/4. Thus, there are other factors, such as a heterogeneous magnetization, which might be controlling the vertical spreading of the Euler deconvolution solutions in the thrust zone. On the other hand, for the iron-ore formation, the solution cluster spreads out occupying a volume, in accordance with the results obtained with the synthetic sources having internal variation of magnetization intensity. As conclusion, although Euler deconvolution–derived solutions cannot offer accurate estimates of source shapes, they might provide a sufficient degree of reliability in the initial estimates of the source dip and volume, which may be useful in a later phase of more accurate modelling.     

Use of the Spectrometric Sum Parameter for Aromatic Amines in the Monitoring of a Former Ammunition Plant

Aromatic amines are important metabolites of nitroaromatic explosives, hence monitoring of aromatic amines’ content at former ammunition plants is necessary. Twenty years ago, a threshold limit value of 0.1 μg/L for the sum of diazotizable aromatic amines in water distributed from the waterworks at the former ammunition plant in Stadtallendorf/Hesse was established. This value is still measured with a spectrometric sum parameter, in which diazotization and a subsequent azo coupling of the analytes are utilized. The sum parameter is well suited for the long‐term monitoring of filter installations, and it allows very quick measurements and a non‐target screening of aniline contents, both of which are important in research. Nevertheless, as several problems are associated with this parameter, we developed analytical methods suitable for the determination of the most important single compounds contributing to the overall sum. Initial results of these methods show that amphoteric anilines are of considerable importance in ammunition waste but have been neglected up to now in official monitoring schemes. The summation of single compound contents in ammunition wastewater generally gives 3 to 6 times higher values than the spectrometrically determined sum, which is mainly due to the choice of the reference substance 4‐nitroaniline in the sum parameter.     

Study on key performance parameters of hydro-pneumatic tensioner for top tensioned riser

In this paper an improved mathematical model of a hydro-pneumatic tensioner (HPT) system for top tensioned riser (TTR) is derived by consideration of friction, mass of piston and piston rod, tension loss in hydraulic oil piping, and compressibility of hydraulic oil. The vertical motion of the riser string is also considered. Subsequently, the proposed detailed model and the conventional simplified model are comparatively studied. Finally, the tension characteristic and performance parameters of the HPT are analyzed based on the proposed model. Results show that the conventional simplified model indeed overestimates the tension of tensioner as it neglects some performance parameters resulting in tension loss. The diameters of piston and piston rod and the initial pressure of high pressure (HP) gas have the most significant influence on the tension of the tensioner. The initial volume of HP gas and the initial pressure of low pressure (LP) gas also have some impact. The influence of the initial volume of LP gas and the inner diameter and length of the piping is relatively small. The research has some reference value for HPT and TTR design.     

Contribution of different generations of the brown shrimp Crangon crangon (L.) in the Dutch Wadden Sea to commercial fisheries: A dynamic energy budget approach

In this paper a contribution is made to the ongoing debate on which brown shrimp generation mostly sustains the autumn peak in coastal North Sea commercial fisheries: the generation born in summer, or the winter one. Since the two perspectives are based on different considerations on the growth timeframe from settlement till commercial size, the Dynamic Energy Budget (DEB) theory was applied to predict maximum possible growth under natural conditions. First, the parameters of the standard DEB model for Crangon crangon L. were estimated using available data sets. These were insufficient to allow a direct estimation, requiring a special protocol to achieve consistency between parameters. Next, the DEB model was validated by comparing simulations with published experimental data on shrimp growth in relation to water temperatures. Finally, the DEB model was applied to simulate growth under optimal food conditions using the prevailing water temperature conditions in the Wadden Sea. Results show clear differences between males and females whereby the fastest growth rates were observed in females. DEB model simulations of maximum growth in the Wadden Sea suggest that it is not the summer brood from the current year as Boddeke claimed, nor the previous winter generation as Kuipers and Dapper suggested, but more likely the summer generation from the previous year which contributes to the bulk of the fisheries recruits in autumn.     

Site response analysis using one-dimensional equivalent-linear method and Bayesian filtering

Site response analysis is crucial to define the seismic hazard and distribution of damage during earthquakes. The equivalent-linear (EQL) is a numerical method widely investigated and used for site response analysis. Because several sources of uncertainty are involved in this type of analysis, parameters defining the numerical models need to be identified from in-situ measurements. In this paper, a Bayesian inference method to estimate the expected values and covariance matrix of the model parameters is presented. The methodology uses data from downhole arrays recorded during earthquakes. Two numerical applications show the good performance and prediction capabilities of the proposed approach.     

Factors that influence fluid flow in a single fracture

To investigate the influence of compression, Poisson effect and turbulence on the fluid flow process and the inversion for fracture surface geometries, we simulate two sets of fractures: one with a defined fracture height standard deviation σ constant and a varying autocorrelation length λ and another with a fixed λ and a changing σ. Under compression, the normal stress closes fractures with a large aperture and thus reduces the effective permeability. However, the Poisson effect, which is induced by the compression, has little influence on the fluid flow properties and does not affect the inversion for fracture height standard deviation or the autocorrelation length. When introducing turbulence, we observe a significant difference between the performance of the Navier–Stokes equation and the local cubic law; compared with the Navier–Stokes equation, the local cubic law overestimates the peak value of the breakthrough time curve and effective permeability, thereby underestimating the mean fracture aperture.     

羊拉铜矿区岩石力学模拟与采场结构参数确定

采用三维弹塑性有限元程序3D-σ对羊拉铜矿的岩石力学进行模拟,并据此提出采场结构参数,对羊拉铜矿开采具有较好指导作用。     

Prediction and assimilation of surf-zone processes using a Bayesian network: Part II: Inverse models

A Bayesian network model has been developed to simulate a relatively simple problem of wave propagation in the surf zone (detailed in Part I). Here, we demonstrate that this Bayesian model can provide both inverse modeling and data-assimilation solutions for predicting offshore wave heights and depth estimates given limited wave-height and depth information from an onshore location. The inverse method is extended to allow data assimilation using observational inputs that are not compatible with deterministic solutions of the problem. These inputs include sand bar positions (instead of bathymetry) and estimates of the intensity of wave breaking (instead of wave-height observations). Our results indicate that wave breaking information is essential to reduce prediction errors. In many practical situations, this information could be provided from a shore-based observer or from remote-sensing systems. We show that various combinations of the assimilated inputs significantly reduce the uncertainty in the estimates of water depths and wave heights in the model domain. Application of the Bayesian network model to new field data demonstrated significant predictive skill (R² = 0.7) for the inverse estimate of a month-long time series of offshore wave heights. The Bayesian inverse results include uncertainty estimates that were shown to be most accurate when given uncertainty in the inputs (e.g., depth and tuning parameters). Furthermore, the inverse modeling was extended to directly estimate tuning parameters associated with the underlying wave-process model. The inverse estimates of the model parameters not only showed an offshore wave height dependence consistent with results of previous studies but the uncertainty estimates of the tuning parameters also explain previously reported variations in the model parameters.     

承压水体上煤柱留设的理论与实践

华盖山煤矿主要可采Ⅱ号煤层下存在强岩溶含水层,为划定安全开采范围,综合应用国内相关科研成果,成功地留设防水煤柱,划定可采区域。经矿井建设检验,满足安全开采需要。     

Parameter evaluation and optimization for multi-resolution segmentation in object-based shadow detection using very high resolution imagery

Object-based shadow detection in urban areas is an important topic in very high resolution remote sensing image processing. Multi-resolution segmentation (MRS) is an effective segmentation method, and is used for object-based shadow detection. However, several input parameters within MRS may result in unstable performance for final shadow detection; thus, the evaluation and optimization for the parameters upon the final shadow detection accuracy cannot be overlooked. In this paper, the three parameters in MRS (scale s, weight of colour w_color and weight of compactness w_compact) upon the final result of a recently proposed method, object-based shadow detection with Dempster–Shafer theory, were evaluated and optimized by sensitivity analysis and Taguchi’s method with three experimental data. Experiments show that scale s is the most sensitive parameter among the three parameters within MRS. More importantly, according to the Taguchi’s method theory, there is a very significant interaction effect between s and w_color, which cannot be overlooked. The shadow detection accuracy yielded by the optimum parameter combination in consideration of the interaction effect is higher than that only optimized by covering the main effect of single parameter in most cases.