松辽盆地南部深层地震资料处理方法研究

针对松辽盆地南部深层原始地震记录接收能量弱、信噪比低、各种干扰波严重和地表条件多变等存在严重的静校正问题，尝试利用CGG、Foucs、Grisys、Promax等多套处理系统的优势模块对跨工区二维大吾4面进行深部地层的折射波静校正、反褶积、剩余静校正、DipMoveOut、偏移等关键技术的联合处理方法试验研究，形成了一套针对松辽盆地南部深层地震资料处理的有效方法。     

GPS广播星历参数拟合算法

介绍了GPS广播星历参数的最小二乘估计方法。推导了相应的计算公式。计算结果表明。文中给出的公式是正确的，其拟合精度以用户距离误差(URE)示时，对预报轨道的损失小于1cm。     

MODIS 1B影像几何纠正方法研究及软件实现

MODIS影像是一种新型和重要的数据。对MODIS 1B影像几何畸变原因进行了深入分析，选择了一种合适的纠正方法。对于1km分辨率MODIS 1B影像，直接采用1km分辨率的空间坐标进行几何纠正；对于250m和500m分辨率的MODIS 1B影像，先用三次样条曲线对坐标进行插值生成同分辨率的坐标，然后利用坐标插值结果对其进行几何纠正。由于MODIS影像在空问分布上的特殊性，采用前向和后向映射相结合的方式确定纠正后某一像素点在原始影像中的位置。根据该位置的条带重叠度，可以确定参与计算像素个数、搜索窗口的大小以及窗口的精确位置；采用归一化反距离加权插值法计算纠正后像素点的属性值。上述优化算法不仅保证了纠正后影像的质量，而且提高了数据处理速度。作者在Visual C 6．0环境下开发实现了上述算法。从坐标插值和几何纠正结果分析，无论是数据处理速度还是纠正后的影像质量和精度均达到要求。     

基于典型相关分析的变化检测中变化阈值的确定

以东营市为例 ,把基于典型相关分析的方法运用于多时相遥感影像的变化检测中。对于变化阈值的确定 ,采用了一种基于贝叶斯理论的最小错误率的方法。这种方法实质上是一种非监督分类的方法 ,即不需要地面实况数据或其它先验知识 ,直接对典型相关处理后的差值图像进行分析计算得到阈值 ,使变化检测的错误率达到最小。实验结果证明了这种方法的有效性。     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

Analytical exploration of γ-function explicit method for pseudodynamic testing of nonlinear systems

It has been well studied that the γ-function explicit method can be effective in providing favorable numerical dissipation for linear elastic systems. However, its performance for nonlinear systems is unclear due to a lack of analytical evaluation techniques. Thus, a novel technique is proposed herein to evaluate its efficiency for application to nonlinear systems by introducing two parameters to describe the stiffness change. As a result, the numerical properties and error propagation characteristics of the γ-function explicit method for the pseudodynamic testing of a nonlinear system are analytically assessed. It is found that the upper stability limit decreases as the step degree of nonlinearity increases; and it increases as the current degree of nonlinearity increases. It is also shown that this integration method provides favorable numerical dissipation not only for linear elastic systems but also for nonlinear systems. Furthermore, error propagation analysis reveals that the numerical dissipation can effectively suppress the severe error propagation of high frequency modes while the low frequency responses are almost unaffected for both linear elastic and nonlinear systems.     

Correcting method of eddy covariance fluxes over non-flat surfaces and its application in ChinaFLUX

Although Eddy Covariance (EC) technique is one of the best methods for estimating the energy and mass exchanges between underlying surface and atmosphere in micrometeorology, errors and uncertainties still exist without necessary corrections. In this paper, we will focus on the effect of coordinate system on the eddy fluxes. Based on the data observed over four sites (one farmland site, one grassland site and two forest sites), the effects of three coordinate system transforming methods (Double Rotation-DR, Triple Rotation-TR and Planar Fit-PF)on the turbulent fluxes are analyzed. It shows that (i) the corrected fluxes are more or less than the uncorrected fluxes, which is related mainly to the sloping degree of surface, wind speed and wind direction; and (ii) pitch angle has a sinusoidal dependence on wind direction, especially in the regular sloping terrain; and (iii) PF method is something like the simplification of TR or DR,and there are not obvious distinctions in correction in sloping grassland and flat farmland, but PF method is not suitable for uneven and irregular forest sites.     

Effects of calculation procedure and sampling site on trap method estimates of sediment resuspension in a shallow lake

Resuspension estimates given by two different trap methods in a shallow lake were compared. The sensitivity of the methods to errors in estimates of gross sedimentation and organic fraction of trapped material was explored. The methods were label method, in which resuspension is estimated by determining the organic fraction of surface sediment, suspended seston and trapped material, and SPIM/SPM method, where the relationship between settling particulate inorganic matter (SPIM) and total settling particulate matter (SPM) is used. During the whole 111 day study period, according to the label method, at a sheltered station 1949 g m⁻² dry weight of sediment was resuspended, whereas SPIM/SPM gave an estimate of 1815 g m⁻². The difference in the estimates was probably due to mineralization loss of organic material in the traps during the two week exposure periods. Sensitivity analysis showed that of the two methods, the label method was more sensitive to variations in the organic content of trapped material. At a wind-exposed station, the total amounts of resuspended matter given by the label method and by the SPIM/SPM method were 4966 g m⁻² and 4971 g m⁻², respectively. Due to wind effects, escape of trapped material took place, which caused underestimation of gross sedimentation and compensated the effects of mineralization loss to diminish the difference between the methods. Of the two methods, the SPIM/SPM method seems thus more suitable for lakes, where bacterial activity is high. If cyanobacterial blooms take place, the label method is probably more reliable, providing that the exposure time of sediment traps is kept adequately short.     

西部山地复杂地震资料处理技术研究

在山地地震资料处理中,由于地震条件和地质条件复杂,使得资料的静校正问题严重,资料的信噪比偏低.通过采用配套的静校正技术和串联叠前去噪技术,较好地解决了这两个问题.     

二维各向同性介质P波和S波分离方法研究

通过对波场矢量计算散度与旋度可将P波和S波进行分离,这种方法是波场传播与计算散度和旋度进行波场分离两部分的结合.基于二维各向同性介质速度模型,首先使用弹性波动方程对速度模型进行波场传播模拟;然后在地表接收多分量记录的同时计算散度代表P波、计算旋度代表S波,由于计算散度和旋度包括对空间各分量求导,这就导致了π/2的相位移,使用Fourier变换在频率域对记录进行-π/2的相位校正,就分别获得P波和S波的波场记录.通过对二维模型试算,并分析结果可知,采用计算散度和旋度进行波场分离是一种有效的方法.