Modeling forced pool–riffle hydraulics in a boulder-bed stream, southern California

The mechanisms which control the formation and maintenance of pool–riffles are fundamental aspects of channel form and process. Most of the previous investigations on pool–riffle sequences have focused on alluvial rivers, and relatively few exist on the maintenance of these bedforms in boulder-bed channels. Here, we use a high-resolution two-dimensional flow model to investigate the interactions among large roughness elements, channel hydraulics, and the maintenance of a forced pool–riffle sequence in a boulder-bed stream. Model output indicates that at low discharge, a peak zone of shear stress and velocity occurs over the riffle. At or near bankfull discharge, the peak in velocity and shear stress is found at the pool head because of strong flow convergence created by large roughness elements. The strength of flow convergence is enhanced during model simulations of bankfull flow, resulting in a narrow, high velocity core that is translated through the pool head and pool center. The jet is strengthened by a backwater effect upstream of the constriction and the development of an eddy zone on the lee side of the boulder. The extent of flow convergence and divergence is quantified by identifying the effective width, defined here as the width which conveys 90% of the highest modeled velocities. At low flow, the ratio of effective width between the pool and riffle is roughly 1:1, indicating little flow convergence or divergence. At bankfull discharge, the ratio of effective width is approximately 1:3 between the pool and downstream riffle, illustrating the strong flow convergence at the pool head. The effective width tends to equalize again with a ratio of 1:1 between the pool and riffle during a modeled discharge of a five-year flood, as the large roughness elements above the pool become drowned out. Results suggest that forced pool–riffle sequences in boulder-bed streams are maintained by flows at or near bankfull discharge because of stage-dependent variability in depth-averaged velocity and tractive force.     

陆源碎屑与碳酸盐混合沉积研究中的几点思考

在前人研究的基础上，结合一些具体研究实例，对混合沉积的定义进行了修正和补充；对混积岩和混积层系重新进行分类和命名；根据混合沉积的定义、成因、成分、结构、沉积构造及接触关系等因素，按照“沉积事件+剖面结构”的原则，提出了渐变式、突变式和复合式3种成因类型，对前人的研究成果进行了概括和归纳；对混合沉积的控制因素进行了深入讨论；在以碳酸盐沉积为主和以陆源碎屑沉积为主的2类沉积背景下详细论述了层序格架中混合沉积的发育情况；结合混合沉积本身的特点讨论了混合沉积与油气的关系。最后针对混合沉积研究现状，指出了该领域研究中存在的问题，并对未来的研究方向进行了展望。     

饶阳凹陷古近系层序发育的控制因素分析

在分析饶阳凹陷古近系层序类型和发育模式的基础上，根据层序的结构特点，对每种层序发育的控制因素进行了分析。认为在沉积物供应速率变化不大的情况下，盆地基底的的沉降速率和沉降高峰期的时间决定着裂谷期层序的结构、各体系域开始发育和结束的时期。沉积物供应速率和可容空间变化的速率的比值决定着准层序组的类型，局部高速率的沉积物供应回在湖侵期发育进积式准层序组。气候的变化也是层序发育的控制因素，在干旱期，湖平面变化和层序的结构主要受气候控制。     

The Neopleistocene of North European Russia: Stratigraphy,paleogeography, and paleoclimate

The Pleistocene sediments of North European Russia have been studied using different methods to establish their composition and identify the enclosed organic remains. The results obtained elucidate natural climatic environments of the Pleistocene and corresponding sedimentation cycles and development stages. Glaciation centers are identified for different Pleistocene epochs based on lithological criteria. The established secular trends characterizing spatial distribution and composition of different-age glacial horizons facilitate their regional correlation. Climatic conditions and paleogeographic settings of sedimentation during interglacial epochs of the middle-late Pleistocene and Holocene are reconstructed. Variations in development of vegetation, temperature, and humidity are detected for the first time in the Timan-Pechora-Vychegda, Arkhangel’sk and Vologda regions with parallel coordination of obtained data. As is concluded, there was a tendency of climate cooling in North European Russia during the Neopleistocene.     

Graben width controlling syn-rift sedimentation: the Palaeogene southern Upper Rhine Graben as an example

Eocene to Early Oligocene syn-rift deposits of the southern Upper Rhine Graben (URG) accumulated in restricted environments. Sedimentation was controlled by local clastic supply from the graben flanks, as well as by strong intra-basinal variations in accommodation space due to differential tectonic subsidence, that in turn led to pronounced lateral variations in depositional environment. Three large-scale cycles of intensified evaporite sedimentation were interrupted by temporary changes towards brackish or freshwater conditions. They form three major base level cycles that can be traced throughout the basin, each of them representing a stratigraphic sub-unit. A relatively constant amount of horizontal extension (ΔL) in the range of 4–5 km has been estimated for the URG from numerous cross-sections. The width of the rift (L _f ), however, varies between 35 and more than 60 km, resulting in a variable crustal stretching factor between the bounding masterfaults. Apart from block tilting, tectonic subsidence was, therefore, largely controlled by changes in the initial rift width (L ₀). The along-strike variations of the graben width are responsible for the development of a deep, trough-like evaporite basin (Potash Basin) in the narrowest part of the southern URG, adjacent to shallow areas in the wider parts of the rift such as the Colmar Swell in the north and the Rhine Bresse Transfer Zone that delimits the URG to the south. Under a constant amount of extension, the along-strike variation in rift width is the principal factor controlling depo-centre development in extensional basins.     

大港滩海区埕北断阶带古近系层序界面的识别方法

通过对大港滩海区埕北断阶带层序地层的研究，将研究区古近系划分为3个三级层序，总结了5种识别层序界面的方法：①地震识别法；②钻井识别法；③测井识别法；④古生物组合识别法；⑤地球化学识别法。在研究区，方法①表现为区域性的上超和削截；方法②表现为岩性和泥岩颜色的突变；方法③表现为各种曲线和地层倾角的突变；方法④表现为古生物组合类型的变化；方法⑤表现为Fe^2＋／Mn^2＋值由下向上由逐渐增大，转为突然变小。其中方法①、③、④是层序界面的主要识别标志，方法②可作为参考标志，而方法⑤的应用效果较差。     

Sedimentary cover of the Lomonosov Ridge: Stratigraphy,structure, deposition history,and ages of seismic facies units

Seismic and geological information on the Lomonosov Ridge is considered with reference to drilling data obtained during the ACEX-302 expedition. A new zonation proposed for the composite section of the ridge sedimentary cover and based on marine microfossils (silicoflagellates and dinocysts) from several boreholes is correlated with biostratigraphic zones of Paleogene sections in northern West Siberia. Principal stages of the Arctic basin development in the Aptian-Cenozoic are defined in onshore and Lomonosov Ridge sections. Synchronous formation of sedimentary sequences in the ridge, an element of the Arctic basin, shelves, and epicontinental seas is established for the period under consideration.     

Tethyan-to-boreal correlation in the Kimmeridgian using high-resolution sequence stratigraphy (Vocontian Basin,Swiss Jura,Boulonnais, Dorset)

Ammonite biostratigraphy plays a central role in the definition of Jurassic stratigraphy. Nevertheless, the strong provincialism of European ammonite species during the Kimmeridgian is a long-standing problem in correlation attempts between the boreal and Tethyan faunal realms. Moreover, the sequence-stratigraphic interpretations for northern and southern Europe given in the Jurassic chronostratigraphic chart of Hardenbol et al. in SEPM Publ. 60 (chart) (1998) are different. The present study aims to resolve this correlation problem in order to better understand the connections between the boreal and the Tethyan realms during the Kimmeridgian. A sedimentological and high-resolution sequence-stratigraphic interpretation is presented for two unpublished sections (Cras d’Hermont and Roche de Mars) in the northern Swiss Jura, where recently discovered ammonites display both boreal and Tethyan influences. Then, these sections are correlated with the same time interval in the central Swiss Jura and Vocontian Basin, which belong to the Tethyan realm. Lastly, a long-distance transect is constructed between the Vocontian Basin, Swiss Jura, northern France, and southern England, the last two areas being part of the sub-boreal realm. The main results of this work are that: (1) third-order depositional sequences, and also higher-frequency sequences, can be correlated from the Tethyan to the boreal realm; (2) the sequence-stratigraphic interpretation given by Hardenbol et al. in SEPM Publ 60 (chart) (1998) for northern Europe seems to be accurate and agrees with the sequence-stratigraphic framework established in the Swiss Jura; (3) the Late Kimmeridgian of the Swiss Jura displays boreal influences; (4) integrated high-resolution sequence-stratigraphic and cyclostratigraphic studies are a valuable approach for bridging the correlation gap between northern and southern Europe.     

Dinocyst biostratigraphy of the Lower Cretaceous in North Siberia

The described scheme of the Lower Cretaceous (Berriasian-Barremian) stratigraphic subdivisions is elaborated based on palynological study of sections in the Khatanga depression, Ust-Yenisei region, Pur-Taz interfluve, and around the Ob River latitudinal segment, the North Siberia. Stratigraphic distribution of microphytoplankton studied in detail is used to distinguish 10 biostratigraphic units in the rank of dinocysts zones. Stratigraphic position of the zones is determined with confidence using data on the Lower Cretaceous reference sections in the Khatanga depression, which were principal ones by constructing the Boreal standard zonation. In majority, boundaries of the dinocysts beds are of a high correlation potential and can be regarded as reliable stratigraphic markers, as they are recognizable not only in Siberia, but also in northern Europe and America.