Intrusion and its implication for subsidence: A case from the Baiyun Sag, on the northern margin of the South China Sea

We develop a series of simple numerical models to explain the anomalous subsidence and deposition phenomena on the northern continental margin of the South China Sea, in particular in the Baiyun Sag. The results suggest that a short-period high rate deposition of around 17 Ma is related to a rapid subsidence event, which may be due to episodic emplacement of a dense intrusion. Necking and gravity models indicate that in the basement of the Baiyun Sag, there is a dense zone that is 100–200 kg/m³ more dense than the surrounding country rock. Considering its high magnetic intensity and regional igneous activity, the dense zone is thought to be related to a phase of basalt intrusion that may have taken place around 17 Ma. Thermal and subsidence models indicate that a hot denser intrusion can cause significant subsidence immediately after the intrusion. The subsidence rate then slows down with cooling, thus becoming consistent with the observed subsidence curves at around 17 Ma. The results also indicate that the lithospheric strength under the Baiyun Sag is negligible, and that the high-velocity layer in the lowermost crust may be not an original part of the pre-rift crust. Instead, it is thought to be underplated intrusion emplaced at around 30 Ma when the continental margin broke up.     

Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.     

Nine thousand years of upper montane soil/vegetation dynamics from the summit of Caratuva Peak,Southern Brazil

Biodiversity loss, climate change, and increased freshwater consumption are some of the main environmental problems on Earth. Mountain ecosystems can reduce these threats by providing several positive influences, such as the maintenance of biodiversity, water regulation, and carbon storage, amongst others. The knowledge of the history of these environments and their response to climate change is very important for management, conservation, and environmental monitoring programs. The genesis of the soil organic matter of the current upper montane vegetation remains unclear and seems to be quite variable depending on location. Some upper montane sites in the very extensive coastal Sea Mountain Range present considerable organic matter from the late Pleistocene and other from only the Holocene. Our study was carried out on three soil profiles (two cores in grassland and one in forest) on the Caratuva Peak of the Serra do Ibitiraquire (a sub-range of Sea Mountain Range – Serra do Mar) in Southern Brazil. The δ¹³C isotopic analyses of organic matter in soil horizons were conducted to detect whether C₃ or C₄ plants dominated the past communities. Complementarily, we performed a pollen analysis and ¹⁴C dating of the humin fraction to obtain the age of the studied horizons. Except for a short and probably drier period (between 6000 and 4500 cal yr BP), C₃ plants, including ombrophilous grasses and trees, have dominated the highlands of the Caratuva Peak (Pico Caratuva), as well as the other uppermost summits of the Serra do Ibitiraquire, since around 9000 cal yr BP. The Caratuva region represents a landscape of high altitude grasslands (campos de altitude altomontanos or campos altomontanos) and upper montane rain/cloud forests with soils that most likely contain some organic matter from the late Pleistocene, as has been reported in Southern and Southeastern Brazil for other sites. However, our results indicate that the studied deposits (near the summit) are from the early to late Holocene, when somewhat wetter and warmer conditions (since around 9000 cal yr BP) enabled a stronger colonization of the ridge of Pico Caratuva by mainly C₃ plants, especially grassland species. However, at the same time, even near the summit, the soil core from the forest site already presented the current physiognomy (or a shrubby/elfin or successional forest), indicating that the colonization of the neighboring uppermost saddles and valleys were probably populated mainly by upper montane forest species.     

超高层建筑GPS实时动态监测技术研究

在特高等级精密工程的测量范畴内,实现对超高层建筑的施工监测是一个非常重要的工作内容,GPS实时动态监测技术在监测中发挥着不可忽视的作用。本文首先对GPS监测技术做简要阐述,并分析了超高层建筑的特点;然后指出了GPS监测技术在施工监测中所发挥的作用;最后结合案例,具体分析了GPS监测技术在超高层建筑中的应用,以期为超高层建筑GPS实时动态监测技术的相关研究提供部分参考意见。     

中国东部高空颠簸时空分布特征及其与热带中东太平洋海温的关系

本文利用1979～2014年NCEP-DOE日平均再分析资料和中国区域2375份航空器空中颠簸报告资料,研究中国东部区域高空颠簸的时空分布特征及其与热带中东太平洋海温异常（简称“海温异常”;空间范围:5°S～5°N,120°～170°W）的关系以及产生这种关系的可能原因。结果表明:中国东部地区高空颠簸与东亚副热带西风急流之间存在显著时空相关关系,其原因是高空纬向风引起的垂直风切变是构成高空颠簸时空分布的主导因素。中国东部夏季高空颠簸与海温异常存在正相关关系;冬季呈现南北两个正负相关区:以30°N为界,北部区域存在显著的负相关,南部区存在显著的正相关,在30°N急流轴附近区域无显著相关关系。海温异常影响中国高空颠簸时空分布的可能原因是海温变化引起对流层高层温度出现异常,进而影响温度的经向梯度,导致东亚副热带西风急流强度和位置出现异常（夏季,急流轴南侧出现西风异常;冬季,急流轴北侧出现东风异常,南侧出现西风异常）。高空纬向风的变化导致纬向风的垂直梯度和经向梯度出现异常,最终影响高空颠簸的时空分布特征。对流层高层温度的异常变化可能是由与热带海温异常相关的平流层水汽变化所引起。     

Study of high temperature targets identification and temperature retrieval experimental model in SWIR remote sensing based Landsat8

For surface features in short-wave infrared (SWIR, 1.3–3.0 μm) in remote sensing imagery, pixel values depict the total energy including reflection and emission. For surface features at normal temperature in SWIR band, emission energy can be ignored. While for surface features at high temperature in SWIR band, emission energy is equal to or even higher than the reflection energy. So remote sensing imagery of SWIR band can be used to separate emission and reflection energy as well as to realize temperature retrieval of high temperature targets. In this study, the seventh band (SWIR band) of Landsat8 OLI remote sensing imagery is used to perform the theoretical model research for temperature retrieval of high temperature targets. In the meantime, it is also used with the corresponding observation experiment of synchronization satellite to check the theoretical model. The result shows that the radiant flux density for mixed pixels with high temperature targets is higher than adjacent pixels without high temperature targets. Thus, the high temperature pixels can be identified in SWIR band. The retrieval results of temperature and fractional area for high temperature targets are consistent with reality. In the study, the result illustrates that it is effective to identify high temperature targets in remote sensing imagery of SWIR band and the model is appropriate for temperature retrieval use.     

基于 CCD 方法的超高层建筑周日摆动监测研究

对超高层建筑塔体进行周日摆动监测,为施工投点纠偏和选择合适投点时机提供科学依据,是施工控制网竖向传递的核心问题。文中针对现有方法在自动化采集及实时表达方面的不足,基于自适应阈值激光光斑中心定位方法,自主研发基于CCD的塔体摆动监测系统,并采用倾斜仪方法与之做同步比较研究。两种方法在广州市东塔施工第三方监测中互为检核验证,具有借鉴意义。     

岩石中的压力影形成的实验观测研究

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。