An electrochemical study of pyrite oxidation in the presence of carbon coatings in cyanide medium

The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness.     

Environmental impacts from mining at Taojiang Mn ore deposit, central Hunan, China

The Taojiang Mn ore deposit was exploited in the early 1960s, and waste rocks were developed since then. Because the Mn ores were hosted within the metal-enriched black shales （Peng et al., 2004）, the continuous mining has led to the exposure of an immense quality of black shales, which might cause serious impacts on environments. The present study deals with this environmental issue with samples from the waste rocks, and from the surrounding soils and surface water. The mineralogy of the waste rock was studied using EMPA, then a large number of elements in all waste rock, soil, and water samples were analyzed at a wide range of concentrations with high accuracy using an Elan6000 ICP-MS machine at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences. The waste rock is composed mostly of black shales, with minor Mn carbonates. Both black shales and Mn carbonates of the waste rock contain many sulfide minerals, mainly pyrite, with minor galena, sphalerite, chalcopyrite, and others. The waste rocks are enriched in many metals including Sc, V, Cr, Co, Ni, Fe, Mn, Cu, Zn, Pb, Th, U, Mo, Sb, Sn, Tl, and others, and the metals are mostly hosted within the sulfides. Weathering of waste rocks might cause emission of the following metals： V, Cd, Ni, Th, U, Mo, Sb, Tl, Sc, Cr, Cu, Zn, Sn, and minor Co, and Pb. The surrounding soils are highly enriched in Cr, Co, Cu, Zn, Mn, Mo, Cd, Tl, and Pb, with the enrichment factors of 2.67.3.8, 7.26, 7.27, 8.2, 5.7, 13, and 5.4, respectively. The element ratios （Rb/Cs, Fe/Mn, Nb/Zr, Hf/Zr, and Ba/Sr） and REE distribution patterns of the soils are similar to those of the waste rocks and bedrocks.     

Geochemistry and Origin of Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Major and trace element contents are reported for Permian manganese ore and associated greenstone from the Ananai manganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The manganese deposit occurs between greenstone and red chert, or among red chert beds. Chemical compositions of manganese ore are characterized by enrichments in Mn, Ca, P, Co, Ni, Zn, Sr and Ba, and negative Ce and positive Eu anomalies relative to post-Archean average Australian Shale (PAAS). Geochemical features of the manganese ore are similar to those of modern submarine hydrother-mal manganese deposits from volcanic arc or hotspot setting. In addition, geochemical characteristics of the greenstone closely associated with the Ananai manganese deposit are analogous to those of with-in plate alkaline basalt (WPA). Consequently, the Ananai manganese deposit was most likely formed by hydrothermal activity related to hotspot volcanism in the Panthalassa Ocean during the Middle Permian. This is the first report documenting the terrestrially-exposed manganese deposit that was a submarine precipitate at hotspot.     

Great earthquakes of variable magnitude at the Cascadia subduction zone

Comparison of histories of great earthquakes and accompanying tsunamis at eight coastal sites suggests plate-boundary ruptures of varying length, implying great earthquakes of variable magnitude at the Cascadia subduction zone. Inference of rupture length relies on degree of overlap on radiocarbon age ranges for earthquakes and tsunamis, and relative amounts of coseismic subsidence and heights of tsunamis. Written records of a tsunami in Japan provide the most conclusive evidence for rupture of much of the plate boundary during the earthquake of 26 January 1700. Cascadia stratigraphic evidence dating from about 1600 cal yr B.P., similar to that for the 1700 earthquake, implies a similarly long rupture with substantial subsidence and a high tsunami. Correlations are consistent with other long ruptures about 1350 cal yr B.P., 2500 cal yr B.P., 3400 cal yr B.P., 3800 cal yr B.P., 4400 cal yr B.P., and 4900 cal yr B.P. A rupture about 700-1100 cal yr B.P. was limited to the northern and central parts of the subduction zone, and a northern rupture about 2900 cal yr B.P. may have been similarly limited. Times of probable short ruptures in southern Cascadia include about 1100 cal yr B.P., 1700 cal yr B.P., 3200 cal yr B.P., 4200 cal yr B.P., 4600 cal yr B.P., and 4700 cal yr B.P. Rupture patterns suggest that the plate boundary in northern Cascadia usually breaks in long ruptures during the greatest earthquakes. Ruptures in southernmost Cascadia vary in length and recurrence intervals more than ruptures in northern Cascadia.     

Lermontovskoe Tungsten Skarn Deposit: the Oldest Mineralization in the Sikhote-Alin Orogen, Far East Russia

Abstract. Lermontovskoe tungsten skarn deposit in central Sikhote-Alin is concluded to have formed at 132 Ma in the Early Cretaceous, based on K-Ar age data for muscovite concentrates from high-grade scheelite ore and greisenized granite. Late Paleozoic limestone in Jurassic - early Early Cretaceous accretionary complexes was replaced during hydrothermal activity related to the Lermontovskoe granodiorite stock of reduced type. The ores, characterized by Mo-poor scheelite and Fe^3+- poor mineral assemblages, indicate that this deposit is a reduced-type tungsten skarn (Sato, 1980, 1982), in accordance with the reduced nature of the granodiorite stock.
The Lermontovskoe deposit, the oldest mineralization so far known in the Sikhote-Alin orogen, formed in the initial stage of Early Cretaceous felsic magmatism. The magmatism began shortly after the accretionary tectonics ceased, suggesting an abrupt change of subduction system. Style of the Early Cretaceous magmatism and mineralization is significantly different between central Sikhote-Alin and Northeast Japan; reduced-type and oxidized-type, respectively. The different styles may reflect different tectonic environments; compressional and extensional, respectively. These two areas, which were closer together before the opening of the Japan Sea in the Miocene, may have been juxtaposed under a transpressional tectonic regime after the magmatism.     

The Paleoproterozoic carbonate-hosted Pering Zn–Pb deposit, South Africa: I. Styles of brecciation and mineralization

The Pering deposit on the Ghaap Plateau, Northwestern Province, South Africa, was the largest of several Zn–Pb occurrences hosted by Neoarchean platform dolostones of the Transvaal Supergroup. With a Paleoproterozoic mineralization age, these occurrences are widely regarded as the oldest representatives of Mississippi Valley-type Pb–Zn deposits. Hosting an initial resource of 18 Mt at an average grade of 3.6 wt% Zn and 0.6 wt% Pb, the Pering deposit was mined from 1984 until its final closure at the end of November 2002. In this study, available geological and grade distribution maps were evaluated and complemented by the examination of mining-related outcrops, drill core, and a large set of ore and host rock samples. Four different styles of brecciation can be distinguished at the Pering deposit: (1) pyritic rock matrix breccia; (2) chemical wear breccia; (3) mosaic breccia; and (4) crackle breccia. Geological and mineral paragenetic observations on these different breccia types suggest that the formation of the Pering deposit commenced with an initial stage of hydrothermal karstification. Large volumes of pyritic rock matrix breccia formed by wall rock collapsing into the open space attributed to carbonate dissolution. This stage of hydrothermal karstification acted as ground preparation for the subsequent mineralization event. By the upward advance of the hydrothermal karstification process, fluid reservoirs in the previously undisturbed dolostone host rock succession were tapped, ultimately leading to fluid mixing. Hydrothermal sulphides are the most abundant where fluid mixing was most effective, i.e. along the outer and upper margins of the breccia bodies, and in stratabound zones along permeable host rock units. Chemical wear brecciation and formation of large volumes of fine-grained replacive sphalerite mineralization mark the early stage of hydrothermal Zn–Pb mineralization associated with this fluid mixing. The fine-grained stage of sulphide mineralization was succeeded by very coarse-grained open-space-infill mineralization. The latter is very uniform across the entire deposit and typically cements mosaic and crackle breccia, but also fills remaining open space within chemical wear brecciated portions of the deposit.     

REE/trace element characteristics of sandstone-type uranium deposits in the Ordos Basin

1 Introduction The Ordos Basin is the second largest sedimentary basin in China. During the last 10 years, a great progress has been achieved in the aspects of tectonic evolution, dynamics process, inner and outer geological processes during Mesozoic-Cen…     

REE characteristics of the Fanshan alunite deposit in Zhejiang Province, China

1 Introduction Alunite [KAl3(SO4)2(OH)6] is a very important non-ferrous metal resource, so many countries throughout the world have made great investments in research on the mechanism of its formation, its geological characteristics and applications. O…     

土屋铜矿上方覆盖层元素分布规律研究

通过对土屋铜矿上方覆盖层不同层位样品进行分析发现，成矿元素Cu在覆盖层底部靠近基岩的原地风化残积层和地表弱胶结层中富集，而在地衰弱胶结层中又倾向于向两“极”富集，即在最粗粒级和最细粒级含量较高．考虑到采样效率和成本等综合因素，在区域调查中，以采集弱胶结层（5～40cm）、细粒级样品（-160目）为最佳采样介质．     

主砂体及其构造改造样式的盆地产铀远景评价判据

本文在介绍并分析美国和前苏联总结的砂岩型铀矿区域评价判据的基础上, 引入当今碎屑岩沉积学和盆地地球动力学方面的若干新进展, 提出以主砂体及其随后经历的构造改造样式相结合的盆地产铀远景评价判据和以分析区域构造活动史和原型盆地演化相结合的盆地产铀远景评价模式。最后以潮水盆地为例, 具体分析了盆地各个时代盖层容存后生铀矿化的可能性, 指出盆地中的主要找矿目标层位和远景成矿地段。