Interpreting tracer breakthrough tailing in a conduit-dominated karstic aquifer

Breakthrough tailing has been observed during dye-tracing recovery tests in the Norville aquifer system (chalk), France. Karst-conduit flow and transport parameters were assessed using two different interpretative methods: the linear graphical method and the Chatwin method (implemented in the Qtracer2 program). The linear graphical method was used to model the observed tailing effects, which was explained by a second smaller delayed breakthrough curve. By comparing the results of tracer-test interpretation for the two methods, it was possible to relate the area of this second curve to the importance of turbulent flow in spring discharge. The more turbulent the flow, the less important the contribution of the second breakthrough curve and the tailing effect. The observed tailing could possibly be controlled by hydrodynamics to a greater extent than usually expected, the tailing effects being mostly attributed to diffusion phenomena. Tailing effects were expected to increase with discharge and the piezometric level, which would have resulted in overpressure in conduits, fissure flooding, etc. Instead, breakthrough tailing tended to disappear with increasing aquifer discharge, which would support the hypothesis of there being mostly hydrodynamic-controlled tailing effects instead of matrix- or fissure-diffusion.An erratum to this article can be found at     

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.     

新疆卡拉麦里金矿带成矿规律及找矿预测

新疆卡拉麦里成矿带内地层较全、构造发育、岩浆活动频繁，志留系、泥盆系和石炭系在带内广泛发育，为本区主要含金地层．卡拉麦里深断裂严格控制区内侵入岩、次一级构造和矿产分布，构成岩浆侵入的主要通道，与此有关的次一级断层和裂隙则构成良好的赋存空间．卡拉麦里深大断裂纵贯全区，金成矿地质条件优越，沿走向Au异常、金矿床(点)成群成带分布，最后确定了7个金找矿远景区．     

滇西潞西上芒岗卡林型金矿

上芒岗金矿赋存于二叠系沙子坡组碳酸岩和侏罗系勐戛组下段砂岩、灰岩中,明显受上芒岗断裂控制,与美国模式卡林型金矿极为相似,具有相同的物质来源和成因模式。上芒岗地区具有广阔的深部找矿前景。     

云南腾冲-潞西金成矿带地质特征与成矿预测

腾冲-潞西金成矿带是云南省重要金成矿带之一。通过分析其地质特征，解剖矿带内典型金矿床，讨论矿带成矿模式及找矿方向，进而提出了矿带内两个重要矿化集中区(段)。     

Timing of deformation in the Norseman-Wiluna Belt, Yilgarn Craton, Western Australia

Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D₁, was preceded by an extensional event D_1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D_2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D₂, a major shortening event, which folded this sequence. D₂ must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D₃–D₄, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D₂–D₄ lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D₂–D₄ deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D₂ folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.     

新疆哈图金矿微球粒的发现及其地质意义

采自新疆哈图金矿区各地层单元和含矿脉体中的基岩人工重砂样品普遍含有一种“微球粒”物质。通过“微球粒”的一般特征，表面、断面结构、矿物组成和化学成分的研究，认为属消融型宇宙尘。并据此提出区内玄武质母岩浆在形成玄武岩的过程中同化、熔融了含宇宙尘的局部老地层物质；为区内金矿化提供含矿热液的花岗岩属重熔型花岗岩。     

指示红土型金矿表征的遥感地质特征

红土风化壳中铁、锰质和粘土等矿物的含量高，存在大量的Ｆｅ３＋、Ｆｅ２＋、Ｍｎ２＋、Ｈ２Ｏ、（ＯＨ）１－、ＣＯ２３等离子，而这些离子团的含量决定了红土风化壳的发射波谱性状，应用ＴＭ波段对这些离子团的探测能力，就有可能识别到红土风化壳及与红土型金矿有关的地物目标。湘南地区的ＴＭ数据处理，表明了与已知红土型金矿对应的“ＫＬ特征标志色块”可作为红土型金矿成矿预测的最佳标志。     

团结沟金矿床地质模型

矿床地质模型是综合信息找矿模型的基础。本文从团结沟金矿床地质特征入手，分析了团结沟金矿床的控矿地质条件，探讨矿床的成因，进而建立起团结沟金矿床的矿床地质模型。     

拉尔玛金矿矿源层──太阳顶群硅质岩的有机地球化学研究

拉尔玛金矿矿源层──太阳顶群硅质岩的有机地球化学研究林丽（成都理工学院，成都６１００５９）关键词有机地球化学，硅质岩，太阳顶群，拉尔玛金矿床拉尔玛金矿床赋存于寒武系太阳顶群中，该群的硅质岩是矿源层。本文探讨矿源层形成过程中与金关系密切的有机质的生物先...