山东内生金矿矿床谱系及其致矿地质异常

矿床谱系是对成矿多样性的理论概括,而成矿多样性又是由不同级别、不同性质的致矿地质异常决定的.本文论述了山东省内生金矿矿床谱系及其致矿地质异常.     

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。     

广西岩溶区金属硫化物矿床风化与元素表生迁移特征

对广西岩溶区三个铅锌硫化物矿床风化带观测结果表明，中低山岩溶区硫化物矿床具有更强烈的风化淋滤作用，但次生晕面积较小；岩溶平原区硫化物矿床风化与元素表生迁移特征较相似于非岩溶区的情况，表现在可产生较宽的ｐＨ偏低带和较大面积的次生晕     

元岭金矿蚀变破碎带特征及其找矿意义

根据对元岭金矿三条蚀变破碎带一般地质特征、微量元素特征的对比研究，并借鉴邻近矿区蚀变破碎带的矿化特征，本文阐明了元岭蚀变破碎带矿化的有利构造部位，总结了蚀变破碎带特征与矿化强度之间的关系，指出蚀变破碎带的矿化蚀变元素为中低温组合，矿化蚀变愈强则参与元素的种类愈多、数量愈大。围岩性质对矿化蚀变有一定影响，围岩中的易迁移亲铜元素和亲硫铁族无素对矿化有利。据此，为进一步成矿预测、评价蚀变破碎带的含矿性提供依据。     

八庙—青山金红石矿床化学成分与成矿关系

本矿床是我国金红石矿床重要的成因及工业类型，为具有特定化学成分的岩石在特定变质条件下形成的。本文通过对大量数据的处理，查明了化学成分与成矿的关系：高Ａｌ２Ｏ３、ＭｇＯ、Ｆｅ２Ｏ３＋ＦｅＯ、Ｋ２Ｏ、Ｐ２Ｏ５、Ｈ２Ｏ＋、ＭｎＯ，低ＳｉＯ２、ＣａＯ、Ｎａ２Ｏ、ＣＯ２、Ｓ等，利于钛富集；高ＴｉＯ２、ＭｇＯ、Ｐ２Ｏ５、Ｓ，低ＳｉＯ２、ＣａＯ、Ｋ２Ｏ、Ａｌ２Ｏ３、Ｆｅ２Ｏ３／ＦｅＯ，利于金红石形成；高Ｓｃ、Ｚｒ、Ｎｉ、Ｚｎ及Ｌａ／Ｙｂ，低Ｙ、Ｎｂ、Ｔｈ、Ｃｄ、Ｂａ、Ｂｅ、ΣＲＥＥ，利于金红石纯度提高。对研究矿床成因及寻找新的同类矿床等有重要意义     

金矿床的热液流体特征研究

通过对中国东部金成矿区域地质特征的分析,根据氢氧同位素及流体包裹体数据特征,表明中国东部金矿床成矿流体主要来自大气降水,其次为变质作用过程释放的水和岩浆分异水;成矿金属组分主要来自太古宙变质岩系。     

桂西古侵蚀沉积间断面型金矿床(续载)

古侵蚀沉积间断面型金矿是桂西的主要金矿床类型。文章着重分析该类型金矿成矿地质条件 ,论述矿床成因及成矿机理 ,认为此类型金矿易采易冶 ,经济效益显著 ,建议加大开发力度。     

黄金的成色

黄金的成色并不是一成不变的，它成色的高低是与成矿温度、成矿阶段、深度、时代、变质程度、水溶液及风化作用等有一定关系，我们从这些关系中可以寻找到我们找矿的捷径和依据。     

中国北西部金矿主要类型,分布规律和成矿带划分

本文较系统地总结了我国北西部金矿主要类型、矿化特征和金矿时空分布规律,在此基础上划分出4个成矿区、12条成矿带、32条成矿亚带,从而指明了找矿方向,为贯彻“以铀为主,综合找矿,多种经营,搞活地质”的方针,提供了较好的参考资料。     

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.