汶川地震震前与同震断层滑移的比较分析

本文利用GPS观测的1999-2007年汶川震前3期地表变形数据和2008年汶川同震地表变形数据,结合地震位错理论,通过高斯变换和坐标旋转建立断层模型,运用遗传算法,反演了龙门山断裂带断层震前3期和同震滑动参数。结果表明龙门山断层震前3期平均走滑位移为-5.39mm,倾向位移为2.66mm,与同震断层滑移相比较,发现震前断层的滑移趋势与同震断层滑移一致,均为逆冲兼右旋的挤压运动。比较震前3期逆冲方向的滑移量,发现逆冲滑移有加速的现象。并根据震前和同震的断层滑动量估算了汶川地震复发周期。     

利用P波接收函数研究青藏高原东南缘地幔转换带结构

研究青藏高原东南缘的深部结构对于理解印度-欧亚板块的碰撞机理和青藏高原的形成演化具有重要的科学意义.本研究对布设在研究区域内566个固定和流动地震台站的波形资料进行了处理,获得77853条高质量P波接收函数,应用接收函数共转换点（CCP）叠加技术获得了研究区域下方精细的地幔转换带间断面起伏形态及转换带厚度变化图像.结果表明：研究区域南北方向上具有两个明显的转换带增厚异常区,南侧异常区位于滇中次级块体与印支块体下方,可能是新特提斯洋板片与上部印度板块间断离并部分滞留在转换带底部的结果;北侧川西地区异常增厚可能与上方岩石圈拆沉并降至转换带有关;腾冲火山起源可能是板块俯冲过程中发生断离造成软流圈物质部分熔融,湿热物质上涌所致.     

Robust dual‐sensor data sea‐surface ghost attenuation for quality control purposes

Three‐dimensional receiver ghost attenuation (deghosting) of dual‐sensor towed‐streamer data is straightforward, in principle. In its simplest form, it requires applying a three‐dimensional frequency–wavenumber filter to the vertical component of the particle motion data to correct for the amplitude reduction on the vertical component of non‐normal incidence plane waves before combining with the pressure data. More elaborate techniques use three‐dimensional filters to both components before summation, for example, for ghost wavelet dephasing and mitigation of noise of different strengths on the individual components in optimum deghosting. The problem with all these techniques is, of course, that it is usually impossible to transform the data into the crossline wavenumber domain because of aliasing. Hence, usually, a two‐dimensional version of deghosting is applied to the data in the frequency–inline wavenumber domain. We investigate going down the “dimensionality ladder” one more step to a one‐dimensional weighted summation of the records of the collocated sensors to create an approximate deghosting procedure. We specifically consider amplitude‐balancing weights computed via a standard automatic gain control before summation, reminiscent of a diversity stack of the dual‐sensor recordings. This technique is independent of the actual streamer depth and insensitive to variations in the sea‐surface reflection coefficient. The automatic gain control weights serve two purposes: (i) to approximately correct for the geometric amplitude loss of the Z data and (ii) to mitigate noise strength variations on the two components. Here, Z denotes the vertical component of the velocity of particle motion scaled by the seismic impedance of the near‐sensor water volume. The weights are time‐varying and can also be made frequency‐band dependent, adapting better to frequency variations of the noise. The investigated process is a very robust, almost fully hands‐off, approximate three‐dimensional deghosting step for dual‐sensor data, requiring no spatial filtering and no explicit estimates of noise power. We argue that this technique performs well in terms of ghost attenuation (albeit, not exact ghost removal) and balancing the signal‐to‐noise ratio in the output data. For instances where full three‐dimensional receiver deghosting is the final product, the proposed technique is appropriate for efficient quality control of the data acquired and in aiding the parameterisation of the subsequent deghosting processing.     

SPATIAL AND TEMPORAL DISTRIBUTION OF SLIP RATE DEFICIT ACROSS HAIYUAN-LIUPAN SHAN FAULT ZONE CONSTRAINED BY GPS DATA

As the northeast boundary of the Tibetan plateau, the Haiyuan-Liupan Shan fault zone has separated the intensely tectonic deformed Tibetan plateau from the stable blocks of Ordos and Alxa since Cenozoic era. It is an active fault with high seismic risk in the west of mainland China. Using geology and geodetic techniques, previous studies have obtained the long-term slip rate across the Haiyuan-Liupan Shan fault zone. However, the detailed locking result and slip rate deficit across this fault zone are scarce. After the 2008 Wenchuan M_S8.0 earthquake, the tectonic stress field of Longmen Shan Fault and its vicinity was changed, which suggests that the crustal movement and potential seismic risk of Haiyuan-Liupan Shan fault zone should be investigated necessarily. Utilizing GPS horizontal velocities observed before and after Wenchuan earthquake(1999~2007 and 2009~2014), the spatial and temporal distributions of locking and slip rate deficit across the Haiyuan-Liupan Shan fault zone are inferred. In our model, we assume that the crustal deformation is caused by block rotation, horizontal strain rate within block and locking on block-bounding faults. The inversion results suggest that the Haiyuan fault zone has a left-lateral strike-slip rate deficit, the northern section of Liupan Shan has a thrust dip-slip rate deficit, while the southern section has a normal dip-slip rate deficit. The locking depths of Maomao Shan and west section of Laohu Shan are 25km during two periods, and the maximum left-lateral slip rate deficit is 6mm/a. The locking depths of east section of Laohu Shan and Haiyuan segment are shallow, and creep slip dominates them presently, which indicates that these sections are in the postseismic relaxation process of the 1920 Haiyuan earthquake. The Liupan Shan Fault has a locking depth of 35km with a maximum dip-slip rate deficit of 2mm/a. After the Wenchuan earthquake, the high slip rate deficit across Liupan Shan Fault migrated from its middle to northern section, and the range decreased, while its southern section had a normal-slip rate deficit. Our results show that the Maomao Shan Fault and west section of Laohu Shan Fault could accumulate strain rapidly and these sections are within the Tianzhu seismic gap. Although the Liupan Shan Fault accumulates strain slowly, a long time has been passed since last large earthquake, and it has accumulated high strain energy possibly. Therefore, the potential seismic risks of these segments are significantly high compared to other segments along the Haiyuan-Liupan Shan fault zone.     

利用近震高频接收函数研究四川理县西山村滑坡体结构

远震接收函数已广泛用于反演台站下方的结构,然而由于地球的非弹性衰减作用,远震数据较难获得高频接收函数,对浅地表结构约束不足.为了克服这一问题,我们使用近震数据的高频接收函数来研究浅表速度结构,并应用于四川理县西山村滑坡体上3个宽频带地震仪记录到的近震事件.本文发展了接收函数V_P-k(V_P/V_S)叠加方法,结合接收函数H-k叠加和波形反演方法获得了台站下方滑坡体的厚度、S波速度和平均V_P/V_S比,并与钻孔得到的滑坡体厚度进行对比.结果表明,滑坡体具有小尺度的横向不均匀性,台站下方滑坡体的平均V_P/V_S比在2.4~3.1之间变化并且在底层存在78~143m·s~(-1)左右的S波低速层.本文观测到的高V_P/V_S比和底层低的S波速度结构,与电磁法获得的滑坡体底层低的电阻率和底部富水特征一致,表明滑坡体h1底界面的抗剪强度相对较弱,是潜在的滑坡危险区域.本文研究结果表明,利用近震接收函数能有效约束浅表的速度结构,进而能为滑坡灾害治理提供一定的地震学参考.     

利用日本GPS网探测2011年Tohoku海啸引发的电离层扰动

海平面的海啸波会产生大气重力波进而引发电离层扰动.本文利用日本GPS总电子含量数据来探测2011年3月11日Tohoku海啸引发的电离层扰动.观测结果表明,在日本上空的电离层中存在两种重力波信号,分别由海平面的海啸波以及地震破裂过程产生.地震产生的电离层重力波分布在震中周围（包括海洋上空以及远离海洋的区域）,而海啸引发的电离层重力波主要分布在海洋上空.地震产生的电离层重力波具有不同的水平速度,包括约210 m·s^-1以及170 m·s^-1,其频率为1.5 mHz;而海啸引发的电离层重力波水平速度快于前者,约为280 m·s^-1,其频率为1.0 mHz.此外,海啸引发电离层重力波与海平面上的海啸波有相似的水平速度、方向、运行时间、波形以及频率等传播特征.本文的研究将电离层中的海啸信号与地震信号区分开来,进一步确认电离层对海啸波的敏感性.     

海底可控源电磁接收机及其水合物勘查应用

海洋可控源电磁法在国外已成为海底天然气水合物调查的有效手段之一.为实现我国海域深水条件下水合物的海洋可控源电磁探测,本文从方法原理出发,采用低功耗嵌入式控制、前端低噪声斩波放大、高精度时间同步和水声通讯等技术,设计并开发了由承压舱、玻璃浮球、采集电路、电场与磁场传感器、姿态测量装置、声学释放器、USBL定位信标、测量臂、水泥块等部件组成的海底可控源电磁接收机,实现了海洋微弱电磁场信号的高精度采集.海底可控源电磁接收机具有高可靠性、低噪声、低功耗和低时漂的特点.利用研制的海底可控源电磁接收机,在琼东南海域进行水合物勘查,采集得到了可靠的人工源电磁场数据.通过数据处理及反演,获得了研究区海底的电阻率模型,结合地震资料,对高阻异常体进行推断解释,其结果为天然气水合物钻探井位布置提供了电性依据.     

微动探测方法软件的实现

利用微动进行勘探无需振动源,方便快捷、对环境没有干扰,是一种很有发展前景的勘探方法。针对微动探测数据处理的需求,开发研制了一套可视化微动探测处理分析软件系统MSMSPAC。该软件采用C~#语言开发,主要功能包括台阵设计、台阵方位角分布分析、数据格式转换、微动有效数据段挑选、数据滤波、重采样、参数计算及频散曲线提取、编辑、合并、项目管理等功能。软件系统界面友好,操作简便。     

建筑用玻化微珠保温混凝土剪力墙抗震结构设计

传统方法主要通过导热系数低的材料和增加墙体厚度来达到抗震效果。该方法不仅浪费能源而且抗震性能较差,因此对建筑用玻化微珠保温混凝土剪力墙抗震结构进行设计,构建玻化微珠保温混凝土本构模型,获得与抗震结构相关的理论数据。根据所获取的数据,选择板壳单元SHELL63作为玻化微珠保温混凝土剪力墙抗震结构单元。依据抗震结构材料参数以及抗震结构单元,采用ANSYS软件模拟构建玻化微珠保温混凝土剪力墙抗震结构。分析实验结果可知,所设计建筑节能抗震结构的抗震性能较好,实际运用价值高。     

川滇块体东边界主要断裂带现今运动特征分析

基于2009年以来的GPS观测数据,利用块体模型和GPS剖面方法分别计算川滇块体东边界主要断裂带的滑动速度,并结合跨断裂带的区域应变时间序列分析断裂带现今的运动特征。结果表明:从速度场变化来看,2013—2015期的速度场在川滇块体东北部有东向增加的微弱变化;从滑动速率结果来看,鲜水河北段的左旋走滑运动有所增强,拉张运动有所增加;小江断裂带的左旋走滑运动普遍有微弱的增强;从去掉线性的区域应变时间序列结果来看,小江断裂带南段主张应变在2014年底出现了趋势性转折,值得进一步关注。