METAMORPHIC PETROLOGY

正20140751 Guo Xincheng(Geological Party,BGMRED of Xinjiang,Changji 831100,China);Zheng Yuzhuang Determination and Geological Significance of the Mesoarchean Craton in Western Kunlun Mountains,Xinjiang,China(Geological Review,ISSN0371-5736,CN11-1952/P,59(3),2013,p.401-412,8     

粤西福湖岭混合岩–花岗岩剖面的发现及其意义

作者野外调查发现的广东阳西福湖岭剖面,自上而下呈云母石英片岩→斑点状和条纹状混合岩→条带状混合岩→混合花岗岩(或"脏花岗岩")的连续分带,且不同类型岩石具有不同变形特征,为研究壳内熔融和花岗岩浆形成及大陆流变等提供了不可多得的自然实例。初步测年结果表明,混合岩和花岗岩均形成于415~445 Ma之间,为加里东期的产物。     

The application of high-resolution 3D seismic data to model the distribution of mechanical and hydrogeological properties of a potential host rock for the deep storage of radioactive waste in France

In the context of a deep geological repository of high-level radioactive wastes, the French National Radioactive Waste Management Agency (Andra) has conducted an extensive characterization of the Callovo-Oxfordian argillaceous rock and surrounding formations in the Eastern Paris Basin. As part of this project, an accurate 3D seismic derived geological model is needed. The paper shows the procedure used for building the 3D seismic constrained geological model in depth by combining time-to-depth conversion of seismic horizons, consistent seismic velocity model and elastic impedance in time. It also shows how the 3D model is used for mechanical and hydrogeological studies. The 3D seismic field data example illustrates the potential of the proposed depth conversion procedure for estimating density and velocity distributions, which are consistent with the depth conversion of seismic horizons using the Bayesian Kriging method. The geological model shows good agreement with well log data obtained from a reference well, located closest to the 3D seismic survey area.Modeling of the mechanical parameters such as shear modulus, Young modulus, bulk modulus indicates low variability of parameters confirming the homogeneity of the target formation (Callovo-Oxfordian claystone). 3D modeling of a permeability index (Ik-Seis) computed from seismic attributes (instantaneous frequency, envelope, elastic impedance) and validated at the reference well shows promising potential for supporting hydrogeological simulation and decision making related to safety issues.     

角度域弹性波Kirchhoff叠前深度偏移速度分析方法

为提高地震成像结果的准确性并真实反映实际地震波场在介质中的传播特性,应该充分利用多分量地震数据的矢量特征进行弹性波成像,其中,最为棘手的问题是纵横波偏移速度场的确定,为此,本文提出了直接利用多分量地震数据进行弹性波角度域偏移速度分析的方法.基于空移成像条件的弹性波Kirchhoff偏移方程提取了弹性波局部偏移距域共成像...     

偏振激光雷达探测的北京地区云的统计特性分析

本文给出了CALIPSO卫星偏振激光雷达自2006年6月至2010年3月间探测的北京地区大气云层的统计特性,并根据理论研究结果对激光雷达探测的云进行了分类,当云的温度低于0℃时发现了过冷水的存在.统计结果表明:温度在0℃以上时,大气中的云大部分为水云;温度在0℃至-25℃之间时,大气中会有过冷水和水平导向的片状晶体的冰...     

各向异性双相介质弹性波场褶积算法数值模拟

从各向同性介质中波场数值模拟的褶积微分算子法出发,推导出了各向异性双相介质中波场传播数值计算的褶积新算法.将常见的二阶微分Biot波动方程用等效的一阶速度—应力双曲方程表示,其中未知的波场向量包括固相和流体的速度分量和应力分量,由此对方程的时间项使用交错网格差分方法计算,而对空间项则采用褶积微分算法进行求解.对各向异性双相介质在单层介质模型和双层介质模型中的波场特征进行了研究.研究的结果显示,在两层介质分界面上当地震波产生反射时能观测到两类纵波和横波,并且在衰减系数大的介质里慢纵波很难见到.     

中国东部岩石圈热状态与流变学强度特征

根据均衡原理制约的地热计算得到中国东部岩石圈的温度分布状态,以40、70、100km和莫霍面深度等温线图以及600°C、1100°C等温面深度的形式表示.同时计算了以1350°C等温面深度表示的中国东部的热岩石圈厚度.结果显示:在扬子克拉通西部四川盆地之下存在160～200km厚的岩石圈根,但在整个华北克拉通之下缺失岩...     

Parallel Numerical Analysis on the Rheology of the Martian Ice-Rock Mixture

The distribution and amount of ground ice on Mars is an important issue to be addressed for the future exploration of the planet.The occurrence of interstitial ice in Martian frozen ground is indicated by landforms,such as fluidized ejecta craters,softened terrain,and fretted channels.How-ever,experimental data on the rheology of ice-rock mixture under Martian physical conditions are sparse,and the amount of ground ice that is required to produce the viscous deformation observed in Martian ice-related landf...     

Effect of Agents on Hydrate Formation and Low-Temperature Rheology of Polyalcohol Drilling Fluid

In order to ensure safe drilling in deep water and marine gas hydrate bearing sediments,the needed characteristics of drilling fluid system were analyzed.Moreover,the effect of different agents on hydrate formation and the low-temperature rheology of designed polyalcohol drilling fluid were tested,respectively.The results show that clay can promote gas hydrate growth,while modified starch and polyalcohol can inhibit hydrate formation to some extent,and PVP K90 has a good performance on hydrate inhibition.Th...     

Elastic lateral-torsional buckling analysis of permanent means of access structure

International Maritime Organization (IMO) adopted a new regulation to request permanent means of access (PMA) for a regular inspection of ship structure. Horizontal platforms for an inspector to walk on should be provided at specified locations. The platform is attached perpendicular to longitudinal bulkheads or side shell like a common longitudinal stiffener. Since the platform is much wider than ordinary stiffeners, a mid-flat-bar is welded in the middle of the platform. The wide platform (i.e. the tall web plate) makes PMA structure prone to lateral torsional buckling prior to overall flexural Euler buckling subjected to axial compression. This study employs the Rayleigh-Ritz method to treat the elastic lateral-torsional buckling of the PMA structure. The deformation of the cross-section can be expressed using six independant parameters. Compared to the previous research for an ordinary stiffened plate (Hughes and Ma, 1996a), two additional parameters are employed to model the deformation of the mid flat bar. This study also proposes a new strain distribution of lateral bending introducing two respective neutral axes for the flange and the mid-flat-bar. Two mathematical models are developed for two cases; one without associated plating, and the other with both the plating and its rotational restraint. In the former, the coupling between the lateral torsional buckling (“tripping”) and the Euler buckling is investigated. In the latter, a plate rotational spring constant is suggested based on extended deformed shape of the plating. For each model, the validity of the proposed method is verified by a comparison with a number of linear buckling analyses carried out using the NASTRAN finite-element program.