广西南丹大厂矿区地震活动特征分析

本文收集了2009年12月至2010年4月广西南丹大厂矿区地震监测台网记录到的421次M_L≥0.5可定位地震事件(含爆破)时空分布情况, 从实际调查和波形特征分析排除爆破记录后, 研究震级较大的几次矿震震源机制解, 按小时段统计爆破频次与能量释放关系。 结果表明, 矿震断裂走向与区域构造较为一致。 矿山地下开采量增加以及之前出现的近半年历史上罕见的干旱气象因素, 在震级较大的人工爆破触发下, 影响了局部构造应力场的稳定性, 由此引发了一系列矿震。     

2009年11月至2010年11月27次中强地震的快速矩张量解

经过半个世纪的发展,地震震源的矩张量表示及其反演已日臻成熟(Dziewonski,Woodhouse,1983).矩张量解不但能够较好地反映地震震源的特性,还能为其它研究提供有用的参考.一些科研机构和组织,如美国地质调查局(USGS)和全球矩心矩张量研究组(GCMT)已经能够在震后5小时内准实时地发布矩     

The Focal Mechanism and Characteristic of Stress Field in the Zipingpu Area before the M_S8.0 Wenchuan Earthquake

Based on seismic wave records of the Chengdu digital seismic network and Zipingpu reservoir digital seismic network from August 16,2004 to May 12,2008 when the Wenchuan MS8.0 earthquake occurred,the parameters of focal mechanisms of 486 earthquakes with magnitude larger than M1.6 in the Zipingpu reservoir area were calculated using amplitude ratio method,meanwhile the temporal-spatial variation characteristics of mechanisms and stress field were analyzed based on these parameters.Results show a low ratio of thrust earthquakes and an increased number of strike-slip earthquakes in the reservoir water area in the period from 2006 to 2008.While in the areas far from the reservoir waterfront,the thrust earthquakes took up a high proportion and the strike-slip ones did not increase.The direction of mean principal compressive stress field was deflected and disturbed differently in each area before the Wenchuan MS8.0 earthquake.     

通化七道沟葛家大窝子单元的就位机制及其成因探讨

就位机制问题是花岗岩地区工作的一个重点,一般来说,一个花岗岩单元,其各侵入体应该具有统一的就位机制,然而事实并非如此,葛家大窝子单元就是一个例外,本文阐述了葛家大窝子单元综合地质特征相同的不同浸入体,其就位机制不同的情况,并对其成因进行了初步探讨。     

A tectonic stress map of China and adjacent regions from earthquakes occurred during 2000～2004

Earthquake focal mechanism solutions provide the basic information about the present-day regional tectonics stress distribution, which controls the activities of crustal faults. Therefore, continued efforts for updating the da-tabase of earthquake focal mechanism solutions are quite valuable and important. The international lithosphere program initiated the ″world stress map project″ (Zoback, 1992) since 1980′s. During this project, worldwide studies and measurements of present-day regional…     

Distribution and fractionation mechanism of stable carbon isotope of coalbed methane

The stable carbon isotope values of coalbed methane range widely, and also are gener- ally lighter than that of gases in normal coal-formed gas fields with similar coal rank. There exists strong carbon isotope fractionation in coalbed methane and it makes the carbon isotope value lighter. The correlation between the carbon isotope value and Ro in coalbed methane is less obvious. The coaly source rock maturity cannot be judged by coalbed methane carbon isotope value. The carbon isotopes of coalbed methane become lighter in much different degree due to the hydrodynamics. The stronger the hydrodynamics is, the lighter the CBM carbon isotopic value becomes. Many previous investigations indicated that the desorption-diffusion effects make the carbon isotope value of coalbed methane lighter. However, the explanation has encountered many problems. The authors of this arti- cle suggest that the flowing groundwater dissolution to free methane in coal seams and the free methane exchange with absorbed one is the carbon isotope fractionation mechanism in coalbed methane. The flowing groundwater in coal can easily take more 13CH4 away from free gas and com- paratively leave more 12CH4. This will make 12CH4 density in free gas comparatively higher than that in absorbed gas. The remaining 12CH4 in free gas then exchanges with the adsorbed methane in coal matrix. Some absorbed 13CH4 can be replaced and become free gas. Some free 12CH4 can be ab- sorbed again into coal matrix and become absorbed gas. Part of the newly replaced 13CH4 in free gas will also be taken away by water, leaving preferentially more 12CH4. The remaining 12CH4 in free gas will exchange again with adsorbed methane in the coal matrix. These processes occur all the time. Through accumulative effect, the 12CH4 will be greatly concentrated in coal. Thus, the stable carbon isotope of coalbed methane becomes dramatically lighter. Through simulation experiment on wa- ter-dissolved methane, it had been proved that the flowing water could fractionate the carbon isotope of methane, and easily take heavy carbon isotope away through dissolution.     

SOURCE PARAMETERS OF THE CANGWU MS5.4 EARTHQUAKE, 31 JULY, 2016

On July 31^st, 2016, an earthquake of M_S5.4 occurred in Cangwu County, Guangxi Zhuang Autonomous Region, which is the first M_S ≥ 5.0 earthquake in coastal areas of southern China in the past 17a. The moderate earthquake activities have come into a comparatively quiet period in coastal areas of southern China for decades, so the study about the Cangwu M_S5.4 earthquake is very important. However, differernt research institutions and scholars have got different results for the focal depth of the Cangwu M_S5.4 earthquake. For this reason, we further measured the focal depth by using CAP method and sPL phase method. sPL phase was first put forward by Chong in 2010. It is often observed between P and S wave of continental earthquakes with epicentral distance of about 30km to 50km. The energy of sPL phase is mainly concentrated on the radial component. Arrival time difference between sPL phase and direct P wave is insensitive to epicentral distancs, but increases almost linearly with the increase of focal depth. Based on these characteristics and advantages, sPL phase method is chosen to measure the focal depth of Cangwu M_S5.4 earthquake in the paper. First of all, we selected the broadband waveform data through seismic stations distributed mainly in Guangxi and adjacent provinces from Data Management Centre of China National Seismic Network and Guangxi Earthquake Networks Center. And an appropriate velocity model of Cangwu area was constructed by the teleseismic receiver function method. Then, the focal mechanism and focal depth of Cangwu M_S5.4 earthquake were determined by using the CAP(Cut and Paste)method. Next, we compared the synthetic waveforms simulated by F-K forward method of different focal depth models with the actual observed waveforms. According to the difference of arrival times between sPL and Pg phases, we finally obtained the focal depth of Cangwu earthquake. The results show that the focal depth is 11km measured by CAP method and 9km by sPL phase method. Based on the focal mechanism solution, isoseismal shapes, aftershocks distributions and investigation on spot, we conclude that the Cangwu M_S5.4 earthquake is a left-lateral strike-slip earthquake which occurred in the upper crust. Our preliminary analysis considers that the seismogenic structure of Cangwu earthquake is a north-northwest branch fault, and the control fault of this earthquake is the Hejie-Xiaying Fault.     

RELOCATION OF THE 23 NOVEMBER 2017 WULONG MS5.0 EARTHQUAKE SEQUENCE AND ANALYSIS OF ITS SEISMOGENIC FAULT

The Wulong M_S5.0 earthquake on 23 November 2017, located in the Wolong sap between Wenfu, Furong and Mawu faults, is the biggest instrumentally recorded earthquake in the southeastern Chongqing. It occurred unexpectedly in a weak earthquake background with no knowledge of dramatically active faults. The complete earthquake sequences offered a significant source information example for focal mechanism solution, seismotectonics and seismogenic mechanism, which is helpful for the estimation of potential seismic sources and level of the future seismic risk in the region. In this study, we firstly calculated the focal mechanism solutions of the main shock using CAP waveform inversion method and then relocated the main shock and aftershocks by the method of double-difference algorithm. Secondly, we determined the seismogenic fault responsible for the M_S5.0 Wulong earthquake based on these calculated results. Finally, we explored the seismogenic mechanism of the Wulong earthquake and future potential seismic risk level of the region. The results show the parameters of the focal mechanism solution, which are:strike24°, dip 16°, and rake -108° for the nodal plane Ⅰ, and strike223°, dip 75°, and rake -85° for the nodal plane Ⅱ. The calculations are supported by the results of different agencies and other methods. Additionally, the relocated results show that the Wulong M_S5.0 earthquake sequence is within a rectangular strip with 4.7km in length and 2.4km in width, which is approximately consistent with the scales by empirical relationship of Wells and Coppersmith(1994). Most of the relocated aftershocks are distributed in the southwest of the mainshock. The NW-SE cross sections show that the predominant focal depth is 5~8km. The earthquake sequences suggest the occurrence features of the fault that dips northwest with dip angle of 63° by the least square method, which is largely consistent with nodal planeⅡof the focal mechanism solution. Coincidentally, the field outcrop survey results show that the Wenfu Fault is a normal fault striking southwest and dipping 60°~73° by previous studies. According to the above data, we infer that the Wenfu Fault is the seismogenic structure responsible for Wulong M_S5.0 earthquake. We also propose two preliminary genetic mechanisms of "local stress adjustment" and "fluid activation effect". The "local stress adjustment" model is that several strong earthquakes in Sichuan, such as M8.0 Wenchuan earthquake, M7.0 Luzhou earthquake and M7.0 Jiuzhaigou earthquake, have changed the stress regime of the eastern margin of the Sichuan Basin by stress transference. Within the changed stress regime, a minor local stress adjustment has the possibility of making a notable earthquake event. In contract, the "fluid activation effect" model is mainly supported by the three evidences as follows:1)the maximum principle stress axial azimuth is against the regional stress field, which reflects NWW-SEE direction thrusting type; 2)the Wujiang River crosscuts the pre-existing Wenfu normal fault and offers the fluid source; and 3)fractures along the Wenfu Fault formed by karst dissolution offer the important fluid flow channels.     

双稀疏字典和FISTA的地震数据去噪

地震数据的随机噪声去除是地震数据处理中的一项重要步骤,双稀疏字典提供了两层稀疏模型,比单层稀疏模型可以更好地去除噪声.该方法首先利用contourlet变换对地震数据进行稀疏表示,然后在contourlet域中使用快速迭代收缩阈值算法（fast iterative shrinkage-thresholding algorithm,FISTA）对初始字典系数进行更新,接着采用数据驱动紧标架（data-driven tight frame,DDTF）在contourlet域中得到DDTF字典并通过FISTA得到更新后的字典系数,最后通过DDTF字典和更新后的字典系数获得新的contourlet系数,并对新的contourlet系数进行硬阈值和contourlet反变换得到去噪后的数据.通过模拟数据和实际数据的实验证明：与固定基变换去噪方法相比,该方法可以自适应地对地震数据进行稀疏表示,在地震数据较为复杂时得到更高的信噪比;与字典学习去噪方法相比,该方法不仅拥有较快的去噪速度,而且克服了字典学习因为缺少先验约束造成瑕疵的缺点.

     

塔里木盆地南缘8.5 ka以来的黄土岩石磁学特征及其磁化率变化机制

黄土岩石磁学参数是古气候研究中的重要指标,其中磁化率应用最为广泛,并在黄土高原地区取得重大进展,其受控于成壤作用的变化机制也被普遍接受.然而在黄土高原外缘的新疆地区,磁化率的变化机制仍不明确,导致磁化率的古气候意义在该区存在较大争议.本文选取塔里木盆地南缘具有精确年代控制的典型黄土剖面（羊场剖面）开展岩石磁学和高分辨率磁化率研究,利用交叉小波分析方法并结合剖面粒度、矿物及元素特征对该地区磁化率变化机制进行初步探讨.结果显示,羊场剖面的岩石磁学性质主要由粗颗粒软磁性矿物所控制,同时也表现出一定的顺磁性特征.根据载磁矿物和磁化率变化特征可将剖面进一步划分为两个阶段：阶段Ⅰ（8.5~2.5 ka）,载磁矿物以亚铁磁性的磁铁矿为主,磁化率值整体较高;阶段Ⅱ（2.5~0.2 ka）,亚铁磁性矿物依然占据主导地位,但硬磁性矿物和以黄铁矿为代表的顺磁性矿物相对增多,磁化率值显著降低.相关性研究和交叉小波分析表明：阶段Ⅰ磁化率与粗颗粒组分的变化具有一致性,符合"风速论"模式;阶段Ⅱ磁化率不仅与粗颗粒组分具有明显的正相关关系,而且与指示成壤作用强度的频率磁化率百分含量呈现出显著的负相关关系,暗示了阶段Ⅱ的磁化率变化可能受到"风速论"和"还原性成壤"模式的共同影响.本文拓宽了对新疆地区黄土岩石磁学特征及其磁化率变化机制的深入理解,也为利用磁化率恢复新疆及中亚地区全新世以来的古气候变化历史提供了新的线索.