Change of multifractal thermal characteristics in the western Philippine sea upper layer during internal wave-soliton propagation

The upper layer (above 140 m depth) temperature in the western Philippine Sea near Taiwan was sampled using a coastal monitoring buoy (CMB) with 15 attached thermistors during July 28–August 7, 2005. The data were collected every 10 min at 1, 3, 5, 10, 15, and 20 m using the CMB sensors, and every 15 sec at 15 different depths between 25 m and 140 m. Internal waves and solitons were identified from the time-depth plot of the temperature field. Without the internal waves and solitons, the power spectra, structure functions, and singular measures (representing the intermittency) of temperature field satisfy the power law with multi-scale characteristics at all depths. The internal waves do not change the basic characteristics of the multifractal structure. However, the internal solitons change the power exponent of the power spectra drastically, especially in the low wave number domain; they also break down the power law of the structure function and increase the intermittency parameter. The physical mechanisms causing these different effects need to be explored further.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

Rain-Flow and Reverse Rain-Flow Counting Method for the Compilation of Fatigue Load Spectrum

The rain-flow counting method is widely used to compile the fatigue load spectrum. The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reverse rain-flow counting method is proposed in this paper. In this counting method, the rule for counting of the rain-flow method is modified, so that the sequence of load-time need not be adjusted. This is a valid and useful method to count cycles and compile the load spectrum and it can be widely used in ocean engineering.     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

Fluctuations of peak energy and peak frequency of local wavelet energy spectrum for wind waves

Ｆｌｕｃｔｕａｔｉｏｎｓ　ｏｆ　ｐｅａｋ　ｅｎｅｒｇｙ　ａｎｄ　ｐｅａｋ　ｆｒｅｑｕｅｎｃｙ　ｏ　ｌｏｃａｌ　ｗａｖｅｌｅｔ　ｅｎｅｒｇｙ　ｓｐｅｃｔｒｕｍ　ｆｏｒ　ｗｉｎｄ　ｗａｖｅｓTXＦｌｕｃｔｕａｔｉｏｎｓｏｆｐｅａｋｅｎｅｒｇｙａｎｄｐｅａｋ...     

双峰谱型海浪的波高和周期分布

本文利用收集到的实测双峰谱型海浪过程资料，把这些资料以波高和周期的相关系数为参数分成５组，讨论每组双峰谱型下被高、周期的统计分布．并探讨了相关系数对波高分布和周期分布的影响。     

A proposed directional function and wind-wave directional spectrum

Ａｐｒｏｐｏｓｅｄｄｉｒｅｃｔｉｏｎａｌｆｕｎｃｔｉｏｎａｎｄｗｉｎｄ－ｗａｖｅｄｉｒｅｃｔｉｏｎａｌｓｐｅｃｔｒｕｍ￥ＷｅｎＳｈｅｎｇｃｈａｎｇ；ＷｕＫｅｊｉａｎ；ＧｕａｎＣｈａｎｇｌｏｎｇ；ＳｕｎＳｈｉｃａｉａｎｄＺｈａｎｇＤａｃｕｏ（Ｒｅｃｅｉ...     

GPS数据采集技术及其在海洋调查中的应用

本文应用VB6．0开发了智能化的GPS数据采集软件．对该软件的功能进行了简单的介绍，同时对一些关键技术作了较详细的描述。利用该软件、GPS接收机及PC机的组合，可对走航式测量仪器(或移动设备)进行实时定位并保存定位记录，且大大减少一些不必要的数据，使得软件更为实用。     

Outer wave number spectrum and statistical distribution of apparent wave number vector

Based on the ray theory and Longuet-Higgins’s linear model of sea waves, the joint distribution of wave envelope and apparent wave number vector is established. From the joint distribution, we define a new concept, namely the outer wave number spectrum, to describe the outer characteristics of ocean waves. The analytical form of the outer wave number spectrum, the probability distributions of the apparent wave number vector and its components are then derived. The outer wave number spectrum is compared with the inner wave number spectrum for the average status of wind-wave development corresponding to a peakness factor P = 3. Discussions on the similarity and difference between the outer wave number spectrum and inner one are also presented in the paper.     

Modelling linear wave transformation induced by dissipative structures—Random waves

The relevant theory is presented and numerical results are compared with the analytical solution for the interaction of non-breaking waves with an array of vertical porous circular cylinders on a horizontal bed. The extension to the cases of unidirectional and multidirectional waves is obtained by means of a transfer function. The influence of the mechanical properties of porous structures and wave irregularity on wave transformation is analysed. Results for unidirectional and multidirectional wave spectra are compared to those obtained for regular waves. The model presented reproduces well the analytical results and provides a tool for analysing several engineering problems.