基于DEM的长江上游土地利用分析

全球环境变化与可持续发展是当今关切的重大问题之一,而土地利用/覆盖变化研究则是其中的热点和前沿领域。目前,严重的生态环境已成为长江上游地区经济社会发展的重大障碍,也是本区和整个长江流域实现可持续发展的最主要的制约因素。本文在DEM基础上,分析了2000年长江上游高程、坡度和坡向与土地利用的关系。研究结果表明,随着高程、坡度和坡向的变化,2000年长江上游的土地利用类型也有很大差异,这些因素对长江上游的土地利用有着重要的影响。为了保护生态环境,促进本区和整个长江流域实现可持续发展,需进一步因地制宜,结合高程、坡度和坡向等影响因素优化土地利用类型和改善地表覆盖。     

北京耕地流失的时空动态与调控途径研究

在国际学术前沿土地变化科学的概念框架下, 耕地非农化及其调控机制研究成为核心问 题之一。研究中国快速城市化地区耕地非农化的驱动力及其调控机制, 不仅是现实的迫切需求, 也可在国际相关学术领域做出独特贡献。以北京为案例进行研究发现: 1996~2004 年北京土地利 用变化中, 大多数地类转换都与耕地直接有关, 耕地流失是北京土地利用变化的核心问题; 城镇 扩展主要占用耕地, 且耕地生产力高的平原地区因建设占用而流失的耕地量大; 远郊山区耕地被 建设占用的压力相对较小, 但被生态用地占用的压力相对较大; 人口增长、经济发展、政府行为与 决策是北京等经济快速发展地区耕地流失的重要驱动因素, 解决途径关键在于寻求耕地保护与 耕地非农利用之间的平衡点、积极发挥土地管理政策的调控作用。     

基于植被信息遥感反演的东亚飞蝗监测研究

植被是东亚飞蝗发生和成灾的重要指示因子。运用遥感技术对植被生长进行监测,对东亚飞蝗的预测和防治具有重要意义。以河北省黄骅市为研究区,利用实地获取的植被冠层孔隙度数据反算的LAI数据以及Landsat-5 TM影像提取的各种VI数据,进行了LAI(LAI-2000改进型算法的反算结果)与TM影像上反演的VI之间的相关分析。结果表明,RDVI最适合反映研究区植被生长状况。分析RDVI与飞蝗发生面积的关系,发现两者呈负线性相关,即随着RDVI减小,飞蝗的发生面积呈线性增大。     

磁化率和密度对中国大陆科学钻探主孔100～2000 m岩石类型的判别

为查明磁化率和密度对于中国大陆科学钻探工程(CCSD)主孔100~2000m岩性的响应和判别特征,利用SPSS10.0统计分析软件进行了判别分析.研究结果显示,岩石的密度和体积磁化率主要受岩性的控制.采用迫入法建立全模型,对CCSD主孔100~2000m井段岩心的岩性判别率达84.8%.其中,蛇纹石化橄榄岩、正片麻岩、副片麻岩、榴辉岩、角闪岩和退变质榴辉岩的判别率分别为100%、87.1%、89.7%、89.6%、96.7%和63.7%.该研究表明,密度和磁化率可以为超高压变质岩石的岩性鉴别和区分提供定量约束,有利于地球物理探测成果和测井资料的准确解析.同时,本文也是SPSS统计分析软件在超高压变质岩石类型判别方面的一个应用实例,对于其他岩石类型的判别分析具有借鉴意义.     

相控震源对地震信号信噪比的改善研究

当测区噪声很强,采用组合震源工作仍然不能满足信噪比要求时,为进一步提高地震勘探信噪比,引入能形成定向地震波的相控震源.针对水平层状介质模型,对组合震源、相控震源地震进行了数值模拟,并定量计算了采用4,8,15,20单元的组合与相控震源地震数据的信噪比,同组合地震相比,相控地震使来自不同反射层的反射波信号的信噪比平均提高了154～990 dB.结果表明,相控震源地震得到的反射波信号信噪比高于组合地震,并且随着激震器数目增加,相控震源合成地震记录中的反射波地震数据信噪比明显提高.     

区域性森林大火的真正成因

森林大火真正起因于地球排气中易燃还原性气体在腐殖层的临界积聚(气体体积分数大约为5%~6%)。现场气体(H2,CO)系统测量结果证实了这一点。测量结果显示,该林区腐殖层中H2、CO质量分数分别为(10~170)×10-6(本底值为0·5×10-6)和(2~60)×10-6(本底值为0·5×10-6),二者均远高于大气本底值数十到数百倍,而且未燃区的测值显然高于1998年燃区。     

基于ANSYS软件benchmark模型耗能减振控制分析

本文系统介绍了当前国际结构振动控制的公共平台———Benchm ark模型,首次给出使用通用有限元软件ANSYS对第3阶段20层非线性钢框架抗震结构的有限元建模,结果表明,模态、无控地震反应分析结果和ASCE给出的MATLAB结果相同。利用粘滞阻尼器对此模型的耗能减振数值仿真分析的结果表明:粘滞阻尼器是一种性能很好的阻尼器,使用本文给出ANSYS的Benchm ark有限元模型来进行耗能减振控制分析是方便的、可行的。     

探测未爆炸弹的地球物理技术综述

采用综合地球物理勘查技术探测未爆炸弹(UXO)具有快速、定位准确和成本低廉的优势.综述了国内外广泛应用的地面高精度磁测法、电磁法以及地质雷达和微重力法在探测UXO中的特点和效果,介绍了国外航空磁测法及航空电磁法探测UXO的进展,并根据某些探测实例阐述了在具体实施过程中应注意的技术问题;提出了适合中国UXO探测的一些措施和建议.     

Adsorption of Pentachlorophenol onto Oxide and Clay Minerals： Surface Reaction Model and Environmental Implications

The adsorption of pentachlorophenol （PCP） onto quartz, kaolinite, illite, montmorillonite and iron oxides has been investigated by batch equilibrium techniques. The pH-dependent isotherms are curves with peak values, the position of which is at about pH = 5-6 depending on the mineral species. Based on distribution of both speciation of surface hydroxyls on minerals and PCP in solution a surface reaction model involving surface complexation and surface electrostatic attraction is presented to fit the pH-dependent isotherms, and both reaction constants are calculated. The results show that on quartz and phyllosilicate minerals the predominant adsorption reaction is surface complexation, meanwhile both of surface electrostatic attraction and surface complexation are involved on the iron oxide minerals. The reaction constants of surface electrostatic adsorption are usually one to three orders in magnitude, larger than that of surface complexation. The concentration-dependent isotherms can be well fitted by Langmnir equation with the correlation coefficient R〉0.93 for kaolinite and iron oxides. The maximum adsorption is found in the order： hematite 〉 lepidocrocite 〉 goethite 〉 kaolinite 〉 quartz 〉 montmorillonite ≈ illite, which can be interpreted by consideration of both reaction mechanism and surface hydroxyl density. The significant adsorption of PCP onto mineral surfaces suggests that clay and iron oxide minerals will play an important role as HIOCs are adsorbed in laterite or latertoid soil, which is widespread in South China.     

Absorption of Arsenite on Several Iron （Hydro-）Oxides and Impact from Pre-processing Methods

The absorption reactions of arsenite on Fe （hydro-）oxides are studied. The three absorbent types are Fe（OH）3 gel and two Fe （hydro-）oxides, in which the Fe（OH）3 gel was dried in a microwave oven under vacuum at 80℃. It is found that pH changes from 9.71 to 10.36 in 6 minutes after the Fe （OH）3 gel was mixed with NaAsO2 solution, as the arsenite replaces the OH- in goethite and Fe（OH）3. At the 40th minute after the start of the reaction, pH decreases, which is most probably because that the monodentate surface complex of absorbed arsenite has changed into mononuclear-bidentate complex and released proton. The decline in pH values indicates not the end of the absorption but a change in the reaction type. Temperature and dissolved gas has little effect on these two types of reactions. The total absorption of arsenite increases after the absorbent is irradiated with ultrasound, which also lead to difficulty in separating the solids from solution. The absorption capacity for arsenite of Fe（OH）3 gel dried in a microwave oven under vacuum is 53.18% and 17.22% respectively better than that of Fe （OH）3 gel and gel dried at 80℃. The possible reasons are that the water molecules in the gel vibrates with high frequency under the effect of microwave irradiation, thereby producing higher porosity and improved surface activity.