基于点云空洞修复和TPS模型的数学形态学机载LIDAR滤波

在分析现有滤波算法的基础上,结合数据驱动和模型驱动式算子各自的优点,提出基于点云空洞修复和TPS变形模型的数学形态学机载LIDAR点云滤波,该方法首先提取和修复由水域造成的大面积点云空洞,采用多尺度形态学开算子作用于修复的数据,得到近似裸露地表面;然后利用2D空间的TPS变形模型,以近似地表面为基础,插值原始点云,根据插值与原始点云高程的差值大小去识别地面点和非地面点。通过定量分析,验证该方法不仅有较高的滤波精度,而且也能较好的保留裸露地表的细节特征,同时该方法有助于辅助人工处理,提高数据处理的质量。     

经验加速度补偿对HY-2A卫星精密定轨的影响

针对HY-2A卫星定轨中存在系统误差的问题,该文提出了加入经验加速度补偿系统误差。为了获得HY-2A卫星的高精度轨道,采用星载DORIS距离变率数据探索了经验加速度对定轨精度的影响。探讨了1d、3d和7d作为经验加速度周期的定轨精度差异,分析了3d作为经验加速度周期时在径向、法向和切向3个方向设置经验加速度对定轨精度的不同影响。研究结果表明:HY-2A卫星在径向和切向不存在系统误差,而在法向存在系统误差,因而在法向设置经验加速度进行力学模型补偿能够取得较好的定轨结果;3d作为经验加速度的补偿周期较为合适,不仅能够减少解算参数个数,缩短计算时间,而且径向定轨精度可达到1.00cm,满足HY-2A卫星精密定轨需求。     

The use of WorldView-2 satellite imagery to model urban drainage system with low impact development (LID) Techniques

Within a wide range of best management practices for stormwater management in urban areas, there has been an increasing interest in source control measures. Source controls such as low-impact development (LID) techniques are potentially attractive as retrofit options for older developed areas that lack available land to implement conventional measures such as stormwater management ponds. Hence, distributed urban drainage models requiring detailed representation of developed drainage areas should be developed to accurately estimate the benefits that LIDs may provide. This study (1) presents a two-stage classification process on a high-resolution WorldView-2 image, and (2) demonstrates how to use the extracted land cover information in the subsequent hydrologic modelling and assessment of different LIDs’ performance. The proposed two-stage classification method achieved an overall accuracy of 80.6%, whereas a traditional pixel-based achieved 68.4% in classifying the same urban area into six land cover classes. From the classification results, the hydrologic properties of micro-subcatchments were imported in the United States Environmental Protection Agency Storm Water Management Model to assess the performance of LIDs. A reduction of run-off volume 18.2% and 37.1% was found with the implementation of porous pavement and bioretention, respectively, in a typical low-rise residential area located in the city of San Clemente, California, US. The study demonstrates the use of high-resolution remote sensing image to aid in evaluating LID retrofit options, and thus benefits in situations where detailed drainage area information is not available.     

成岩作用与油气侵位对砂岩铀成矿的约束--以准南硫磺沟地区头屯河组砂岩铀成矿为例

为了解准噶尔盆地南缘硫磺沟地区中侏罗统头屯河组砂岩成岩-流体演化与铀成矿响应,进而客观评价其成矿潜力。通过光薄片鉴定、X衍射、扫描电镜分析得出:目的层主要为岩屑细砂岩,依次经历了浅埋藏、深埋藏和表生-热液成岩阶段,遭受较强的机械压实、胶结及溶蚀作用。其黏土矿物以高岭石为主,碳酸盐矿物有细亮晶和泥晶两类,硅质胶结微弱,局部见细晶黄铁矿及其褐铁矿氧化产物。成岩环境可能经历了由酸性到弱碱性再到酸性,由同生期氧化-浅埋期还原-短暂抬升期氧化还原过渡-缓慢沉降期还原增强-快速抬升期氧化的演化过程。砂岩中存在较多油气包裹体;酸解总烃为5.72~449.14 μL/kg,以CH₄为主;方解石脉δ13C_V-PDB为-25‰~-6.7‰,δ18O_V-SMOW为11.1‰~18.9‰;结合野外调查认为目的层存在一期中等偏弱的后生油气侵位,从而影响了砂体的Eh及pH值。以上成岩过程及烃类流体活动使得目的层早期形成了小型层间氧化带型铀矿并得以局部保存,晚期形成了一定规模的地表潜水氧化带型铀矿体。     

基于光谱特征的月球岩性分类方法研究——以Apollo 16登月区域为例

利用NASA行星数据系统提供Apollo计划登月点采样线路影像数据,通过与嫦娥二号CCD数据、印度M~3数据空间校正获得采样路线坐标。开展嫦娥二号CCD数据与印度M~3数据MAP(后验概率)融合并选择Apollo 15、Apollo 16-62231的LSCC测得的标准岩石双向反射率光谱与M~3、嫦娥二号进行交叉定标。本文采用月球岩石光谱谱型全特征分析方法,选取涵盖Apollo计划登月获取的36个基站主要岩性87种、285件岩石样品,利用校正后的M~3数据分析月球典型岩石各阶吸收反射特征,建立月球典型岩石标准遥感影像光谱库,此后应用Apollo 623个岩石样品进行对比得到很好结果,同时完成Apollo 16登月点周围领域岩性分布图,并讨论了研究区的岩石成因,Apollo 16区域形成于高地大撞击,在早期的研究中已经被用于划分月球年代,本文方法对于月球岩石类别研究与理解月球的岩浆演化具有重要的研究价值。     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

Characteristics and Genetic Mechanisms of Overpressure in the Depressions of Bohai Bay Basin, China

The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.     

陕县宽坪银多金属矿区地质特征与成矿规律

陕县宽坪银多金属矿位于崤山矿集区内,已探明银铅锌储量达中等以上规模。通过研究矿区地质特征,认为矿体主要受构造蚀变带控制,在含矿热液的多期、多阶段交代和充填作用下,在构造有利部位富集成矿。     

甘肃宝积山盆地中侏罗世石拐茨康叶表皮构造及古环境意义

甘肃宝积山盆地中侏罗统窑街组发现茨康类植物化石,通过对其外部形态和表皮构造研究,认定为石拐茨康叶(Czekanowskia(Vachrameevia)shiguaiensis)。对比当前化石及其现存最近对应种(the nearest living equivalent species)—Ginkgo biloba L.的气孔比率,得到宝积山盆地在中侏罗世的古大气CO_2体积分数为1.55×10~(-3),数值接近GEOCARBⅢ碳平衡模型的拟合曲线,表明茨康叶属植物也是恢复古大气CO_2体积分数的良好材料。同时,通过角质层特征进行古环境重建,结果表明宝积山盆地在中侏罗世时期气候较为温和湿润。     

新疆伊宁县塔吾尔别克金矿床流体包裹体特征研究及矿床成因

塔吾尔别克金矿床是西天山吐拉苏断陷盆地中一个重要的金矿床。矿体主要赋存于早石炭世二长斑岩及大哈拉军组第五岩性段安山岩、蚀变凝灰岩中,受断裂构造控制,矿床围岩蚀变作用普遍而强烈。矿石金属矿物主要为黄铁矿、自然金、赤铁矿和黄铜矿等,非金属矿物主要为石英、斜长石、方解石等。成矿过程大致划分为3个成矿阶段:1石英-黄铁矿阶段;2石英-硫化物脉阶段;3石英-碳酸盐阶段。石英及方解石中流体包裹体类型简单,主要为气液两相水包裹体和纯液相水包裹体。包裹体测试均一温度为100~196℃,流体盐度为0.0%~7.3%(质量分数,NaCl_(eq)),流体密度为0.9~1.0 g/cm~3,计算出成矿压力为5.2~81.9 MPa,对应成矿深度为0.5~7.4 km。塔吾尔别克金矿床成矿流体包裹体显示低温度、低盐度和较低密度的流体特征,表明成矿压力小和深度较浅。结合矿床地质特征、流体包裹体特征及前人研究成果,初步认为该矿床为浅成低温热液型金矿床。