渭河盆地及邻区重力异常小波多尺度分解与解释

基于EGM2008重力场模型计算获得了渭河盆地及邻区布格重力异常。采用小波多尺度分解方法对布格重力异常进行了4阶小波逼近和小波细节分解,同时基于平均径向对数功率谱方法定量化地计算出1~4阶小波细节和小波逼近所对应的场源平均埋深。结合区域地质和地震资料,对获得的重力场结果进行分析,得到如下结论:①鄂尔多斯地块、渭河盆地、秦岭造山带3个一级构造单元的布格重力异常之间存在明显差异;构造区内部重力异常也存在横向的显著差异。布格重力异常的走向、规模、分布特征与二级构造区及主要的断裂具有一定的对应关系。②渭河盆地及邻区布格重力异常1~4阶细节对应4~23 km不同深度的场源信息,鄂尔多斯地块南缘东、西部的地壳结构存在明显的差异;渭河盆地凹陷、凸起构造区边界清晰,断裂边界与重力异常边界具有较好的一致性;秦岭造山带重力异常连贯性不好,东、西部重力异常变化特征表现出明显的差异。③渭河盆地及邻区布格重力异常分布与莫霍面埋深具有非常明显的镜像关系。渭河盆地及邻区地震主要分布在六盘山—陇县—宝鸡断裂带、渭河断裂与渭南塬前断裂交汇处、韩城断裂与双泉—临猗断裂交汇处。渭河盆地及邻区重力异常主要由中上地壳剩余密度体所影响,这可能是该区地震以浅源地震为主的主要原因。     

布格改正和地形改正的误差——关于区域重力测量中地形改正最大半径的讨论

在布格改正中,我们假定地壳为无限大水平板。事实上,地球表面是球面而不是平面。当地壳充分小类似于平面时,它不可能同时为无穷大;当地壳充分大时,它又不是一个平面。因此,布格改正势必造成相当大的误差。本文提出几种计算球壳重力的精确公式,用以减少布格改正和地形改正中的计算误差。     

Correction of Single Log-Derived Temperatures in the Danish Central Graben,North Sea

An equation for correcting log-derived temperatures measured at well depths between 1200 and 5400 m has been derived by comparing log-derived temperatures from wells in the Danish Central Graben (North Sea) with DST temperatures, from the same wells, that are believed to represent true formation temperatures. Equations developed previously using data over different depth ranges from Malaysia and Mexico yield fair results when applied to the North Sea. However, a better fit to the Danish data was obtained using new equations that are similar to those published in the earlier studies. The correction method here is based principally on time since end of circulation (TSC), but it also includes a small dependence on depth. In this study the true subsurface temperature (T_true) (°C) is given by where the correction factor f = 3.07·TSC^(–0.09)/(0.47·Z^(0.175)), T_surf is the seafloor temperature in °C, T_meas is the measured log temperature in °C, TSC is in hours, and Z is the depth below seafloor in meters. When TSC is not known, maximum probable, minimum probable, and most likely values can be estimated from the observed trend of TSC with depth.An estimate of the uncertainty in the corrected temperature can be obtained from the equation where is the standard deviation of the error in the correction factor f. This approach can be modified to include the additional uncertainty associated with unspecified TSC.     

台西南海域表层沉积物元素地球化学特征及其物源指示意义

对南海台西南海域表层沉积物的常量、微量元素含量分布变化特征、元素相关性以及元素组合特征进行了分析。结果表明,SiO2和Al2O3是研究区表层沉积物中的最主要组分,元素的含量与水深、粒度存在明显的相关性;R型因子分析识别出3个元素组合,分别代表细粒的陆源碎屑沉积组合、粗粒的生物碎屑组合和细粒的生物碎屑组合;研究区表层沉积物的物质来源主要有陆源和生物源两种,以陆源为主。     

基于MapX控件技术的自动化重力粗差探测

重力数据作为研究地球重力场的基础数据,应用十分广泛,其数据质量的优劣直接影响着应用结果的好坏,本文介绍了布格异常重力粗差探测方法,利用数据库和Map X控件技术实现自动化粗差探测,采用粗差剔除后的重力数据得到了我国高精度的垂线偏差、高程异常模型,证明了该方法的正确性。     

Variability of the axial morphology and of the gravity structure along the Central Spreading Ridge (North Fiji Basin): evidence for contrasting thermal regimes

The Central Spreading Ridge (CSR) is located in the central part of the North Fiji Basin, a complex back-arc basin created 12 Ma ago between the Pacific and Indo-Australian plates. The 3.5 Ma old CSR is the best developed, for both structure and magmatism, of all the spreading centers identified in the basin, and may be one of the largest spreading systems of the west Pacific back-arc basins. It is more than 800 km long and 50–60 km wide, and has been intensively explored during the French-Japanese STARMER project (1987–1991).The CSR is segmented into three first order segments named, from north to south, N160°, N15° and N-S according to their orientation. This segmentation pattern is similar to that found at mid-ocean ridges. The calculated spreading rate is intermediate and ranges from 83 mm/yr at 20°30 S to 50 mm/yr at 17°S. In addition, there is a change in the axial ridge morphology and gravity structure between the northern and southern sections of the CSR. The axial morphology changes from a deep rift valley (N160° segment), to a dome split by an axial graben (N15° segment) and to a rectangular flat top high (N-S segment). The Mantle Bouguer Anomalies obtained on the northern part of the CSR (N160°/N15° segments) show bull's eye structures associated with mantle upwelling at the 16°50S triple junction and also in the middle of the segments. The Mantle Bouguer Anomalies of the southern part of the ridge (N-S segment) are more homogeneous and consistent with the observed smooth topography associated with axial isostatic compensation.At these intermediate spreading rates the contrast in bathymetry and gravity structure between the segments may reflect differences in heat supply. We suggest that the N160° and N15° segments are cold with respect to the hot N-S segment. We use a non-steady-state thermal model to test this hypothesis. In this model, the accretion is simulated as a nearly steady-state seafloor spreading upon which are superimposed periodic thermal inputs. With the measured spreading rate of 50 mm/yr, a cooling cycle of 200,000 yr develops a thermal state that permits to explain the axial morphology and gravity structure observed on the N160° segment. A spreading rate of 83 mm/yr and a cooling cycle of 120,000 yr would generate the optimal thermal structure to explain the characteristics of the N-S segment. The boundaries between the hot N-S segment and its cold bounding segments are the 18°10 S and 20°30 S propagating rifts. A heat propagation event along the N-S segment at the expense of the adjacent colder failing segments, can explain the sharp changes in the observed morphology and structure between the segments.     

舒兰-尚志断裂带地质及地球物理场特征

舒兰—尚志断裂是依兰—伊通断裂的中段,通过布格重力异常和航磁△T异常的分析及数据处理、场的转换、异常分离、重力、航磁、地震综合解释确定F1、F2、F3、F4、F5为主要断裂。通过地质特征对该区地层、岩浆活动有一定了解。对断裂盆地认识及从区域性了解第三纪含煤建造特征与构造体系的关系。通过资料总结为后期煤炭资源勘查提出建议和方案。     

New high‐resolution grid of gravimetric terrain corrections over Australia

A 9 arc‐second grid of gravimetric terrain corrections has been computed over Australia using ver.2 of the GEODATA 9 arc‐second digital elevation model (DEM) and the fast Fourier transform technique. This supersedes the 27 arc‐second grid previously reported in this journal, computed from ver.1 GEODATA DEM. The improved resolution is possible because of the removal of errors in ver.1 DEM.     

江苏矿产资源潜力评价重力专题属性库结构

介绍了基于MapGIS平台的重力测量工作程度图、布格重力异常图、剩余重力异常图和重力推断地质构造图属性库结构及字段要求,属性库规范、有序,已在江苏矿产资源潜力评价中得到应用。