华北克拉通东部早白垩世伸展盆地的发育过程及其对克拉通的破坏

在晚侏罗世华北克拉通东部破坏之初出现了区域性隆起,全区缺失上侏罗统沉积。在早白垩世早期,出现了区域性的伸展活动,断陷盆地形成,克拉通南、北缘伸展活动最强,北部燕山构造带以出现变质核杂岩为特征,南部出现宽裂谷型盆地。早白垩世中期华北克拉通东部普遍出现了火山活动与岩浆侵入。早白垩世晚期克拉通上以出现窄裂谷型盆地为特征,沿北北东走向的郯庐断裂带断陷活动最强。这些断陷盆地的演化过程揭示,经历地表抬升后,克拉通破坏之初的岩石圈热而弱,从而形成变质核杂岩或宽裂谷型盆地。这期间的破坏强度在空间上具有不均匀分布的特征,受控于早期岩石圈地幔的结构。经过早白垩世中期的大量岩浆活动之后,早白垩世晚期克拉通岩石圈温度降低、强度变大,从而利用早期大型断裂构造形成窄裂谷型盆地。这现象支持华北克拉通东部晚中生代的岩石圈减薄是以逐渐拆沉机制为主。     

雁南煤矿北二采区充水因素及开采影响评价

在全面分析大雁矿业集团公司雁南煤矿北二采区的水文地质条件及煤层开采矿井充水因素的基础上,计算了开采27^1号煤层时导水裂隙带发育高度．得出了北二采区各煤层工作面开采即不会受到上部砂砾含水层的影响,雁南煤矿铁路涵洞以西的胜利河冲击沟也不会受到北二采区的采动塌陷影响的结论。     

浅谈测井方法在工程勘察中的应用

地球物理测井应用于工程勘察中,能够较好地解决用钻探不易解决的问题,如有效判别薄夹层、寻找井旁隐伏断裂破碎带、判断孔内土层稳定性以及测定土层的速度等。其中自然伽马测井曲线在判定含砾粘土夹层及软弱薄粘土夹层等方面具有较高的准确性;声波、井径、自然γ、视电阻率等测井方法可有效查找井旁隐伏断裂破碎带,特别是声波测井曲线异常更为明显;另外跨孔实测剪切波速还可进行地基土加固效果检验。     

苏里格气田盒8气藏气水层测井识别研究

鄂尔多斯盆地苏里格气田盒8气藏为弹性驱动的河流相低效气藏,储层非均质性强,在开发中普遍见水。根据试采情况将气藏储层分为气层、水层、气水层三类,开展气、水层的测井识别研究。以区内26口井50个射孔层段各层的试油结果作为依据,选出了700个样本点作为判识建模的标本,以声波时差和中子孔隙度等8个原始测井值作为判识变量组合,采用模糊判别分析,建立了各层的判识模型。回判结果表明,模型对气层精度达到97％,水层为89％,气水层为94％。利用未参加建模的出水井射孔段对模型进行验证,判识结果基本符合实际情况,模型具有较高精度。     

(ϖμ/ϖT) P of the lower mantle

We estimate (/T) _P of the lower mantle at seismic frequencies using two distinct approaches by combining ambient laboratory measurements on lower mantle minerals with seismic data. In the first approach, an upper bound is estimated for |(/T) _P | by comparing the shear modulus () profile of PREM with laboratory room-temperature data of extrapolated to high pressures. The second approach employs a seismic tomography constraint ( lnV _S / lnV _P ) _P =1.8–2, which directly relates (/T) _P with (K _S /T) _P . An average (K _S /T) _P can be obtained by comparing the well-established room-temperature compression data for lower mantle minerals with theK _S profile of PREM along several possible adiabats. Both (K _S /T) and (/T) depend on silicon content [or (Mg+Fe)/Sil of the model. For various compositions, the two approaches predict rather distinct (/T) _P vs. (K _S /T) _P curves, which intersect at a composition similar to pyrolite with (/T) _P =–0.02 to –0.035 and (K _S /T) _P =–0.015 to –0.020 GPa/K. The pure perovskite model, on the other hand, yields grossly inconsistent results using the two approaches. We conclude that both vertical and lateral variations in seismic velocities are consistent with variation due to pressure, temperature, and phase transformations of a uniform composition. Additional physical properties of a pyrolite lower mantle are further predicted. Lateral temperature variations are predicted to be about 100–250 K, and the ratio of ( lnp/ lnV _S ) _P around 0.13 and 0.26. All of these parameters increase slightly with depth if the ratio of ( lnV _S / lnV _P ) _P remains constant throughout the lower mantle. These predicted values are in excellent agreement with geodynamic analyses, in which the ratios ( ln / lnV _S ) _P and ( / lnV _S ) _P are free parameters arbitrarily adjusted to fit the tomography and geoid data.     

暖切变型江淮梅雨锋结构及其形成和维持机制

对在1991年7月上旬特别稳定的梅雨形势下持续10天的特大暴雨期作了合成和典型过程研究,并进一步探讨了暖切变型江淮梅雨锋天气系统模型。它在自由大气层表现为结构竖立的相当正压切变线和一种不同于经典地转动量近似的带状准二维运动场。边界层的浅层锋生倾斜环流以及偏于切变线轴以南的Ekman抽吸与自由大气层中基本上由积云对流加热驱动的竖直环流相互依存和耦合,造成持续的大暴雨。这种系统的初生和中断后复苏的机制可能是由斜压性极弱的副热带高空东移的短波扰动在低层“湿度锋”带紧南侧触发导致的一种带状CISK。     

Redefining active volcanoes: a discussion

The analysis of the current definitions of active volcanoes indicates that they are empirical, conventional, inaccurate, nongeological, and arbitrarily constraining. Redefinition is therefore needed. One possible approach is to refine the current empirical definitions. A statistically reasonable and practical redefinition using a geologically based time convention-Holocene or 10000 years-is suggested. A set of time conditions according to volcano typology-i.e. 1000; 10000 and 100000 years for high-frequency basaltic shields, andesitic-dacitic composite volcanoes and low-frequency large silicic calderas, respectively-as further refinement of the empirical definition is also envisaged. Devising a phenomenological definition as a theoretical approach is another possibility, but in practice extant diagnostic means are still unsatisfactory to discriminate accurately between dormant and extinct volcanoes. As a consequence of the redefinition, a classification of volcanoes according to their eruptive status is proposed. Redefinition of active volcanoes might increase accuracy in the usage of basic terms in volcanology and influence volcanic hazard assessment and risk mitigation projects.     

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.     

Large-scale rheomorphic shear deformation in Miocene peralkaline ignimbrite E,Gran Canaria

the single ignimbrite cooling unit E (average thickness, 28 m; volume, ca. 30 km₃) forms the uppermost member of the Miocene Upper Mogán Formation on Gran Canaria. It is strongly chemically zoned from basal, first-erupted comendite (peralkaline rhyolite) to late-erupted trachyte, and, apart from an upper trachytic zone, it is densely welded. E was emplaced onto a surface inclined ca. 2–5° from the source caldera. Detailed mapping of key sections, up to 300 m long, exposed in barranco walls, ca. 10 km from the caldera margin, reveals structures that are interpreted to have been produced by rheomorphic deformation of the ignimbrite along shear zones. The shear zones formed within the lower-viscosity comenditic tuff. Extensional structures include mega-boudinage and decapitated sequences and compression resulted in sequence repitition by overthrusting. Mechanisms traditionally thought to be important during rheomorphic deformation of welded tuffs (compaction, lateral creep, folding, vertical density-driven diapirism) cannot account for these features, which reflect lateral (post-compactional) rheomorphic movement locally in excess of 800 m. We suggest the following sequence of events: emplacement of the several flow units; compaction, with little lateral movement; rheomorphic deformation. During and after compaction, layers of secondary porosity developed within the comenditic tuff, possibly where upward escape of gas was prevented by overlying, relatively impermeable layers of densely compacted ignimbrite. These structurally weak layers of high porosity subsequently acted as shear zones.