广西老厂铅锌矿床地质特征及其成因探讨

本文是在专题研究基础上,探讨广西老厂铅锌矿床地质特征和矿床成因。该矿床位于海洋山复式背斜南段的老厂穹窿构造核部,铅锌矿化受构造、地层和岩性控制。矿体呈脉状,产于NE向组张扭性断裂构造中;围岩为寒武系白云岩,板岩、砂岩;矿石类型以锌为主,矿物成分简单,以闪锌矿、方铅矿与石英、白云石为主,具充填、交代矿石结构、构造,矿石平均品位含Zn9.94%、Pb1.50%;围岩蚀变主要为硅化、绢云母化和碳酸盐化。据地层岩石元素丰度值、稀土元素配分和稳定同位素数据、资料,探讨了成矿物质来源于围岩,热液主要来自大气降水。因此,认为本矿床实属产于寒武系轻变质岩中的层控矿型大气降水热液铅锌矿床。     

四川石棉独立碲矿床蚀变岩的地质地球化学研究

四川石棉大水沟独立碲矿床堪称世界首例，其矿体两侧的围岩蚀变较窄，且蚀变带与矿脉及未蚀变岩呈清楚而截然的接触关系。主要围岩蚀变为白云石化、白（绢）云母化、云英岩化及电气石化等。这些蚀变作用分别发生于１７７．７～１６５．１Ｍａ和９１．７１～８０．１９Ｍａ。蚀变作用过程中ＳｉＯ２大量析出，Ａｌ２Ｏ３、ＴｉＯ２、ＣａＯ、ＭｇＯ、Ｋ２Ｏ、Ｈ２Ｏ、ＣＯ２、Ｆｅ２Ｏ３、ＭｎＯ则有不同程度地带入。与此同时，ＲＥＥ在此过程中包集体迁出，Ｔｅ、Ｂｉ、ＡＳ等元素的含量则决定于蚀变作用及其强度，而与原岩无关。     

八庙—青山金红石矿床化学成分与成矿关系

本矿床是我国金红石矿床重要的成因及工业类型，为具有特定化学成分的岩石在特定变质条件下形成的。本文通过对大量数据的处理，查明了化学成分与成矿的关系：高Ａｌ２Ｏ３、ＭｇＯ、Ｆｅ２Ｏ３＋ＦｅＯ、Ｋ２Ｏ、Ｐ２Ｏ５、Ｈ２Ｏ＋、ＭｎＯ，低ＳｉＯ２、ＣａＯ、Ｎａ２Ｏ、ＣＯ２、Ｓ等，利于钛富集；高ＴｉＯ２、ＭｇＯ、Ｐ２Ｏ５、Ｓ，低ＳｉＯ２、ＣａＯ、Ｋ２Ｏ、Ａｌ２Ｏ３、Ｆｅ２Ｏ３／ＦｅＯ，利于金红石形成；高Ｓｃ、Ｚｒ、Ｎｉ、Ｚｎ及Ｌａ／Ｙｂ，低Ｙ、Ｎｂ、Ｔｈ、Ｃｄ、Ｂａ、Ｂｅ、ΣＲＥＥ，利于金红石纯度提高。对研究矿床成因及寻找新的同类矿床等有重要意义     

地壳演化与成矿作用——以川滇地洼系“四层楼”铜矿床序列为例

提出川滇地洼系“四层楼”铜矿床序列的形成与陆壳演化的成生联系,是与本区陆壳由前地槽—地槽—地台—地洼演化各阶段与之相匹配的成矿作用的产物.与此同时,并总结了本区“四层楼”铜矿床序列的成矿作用具有明显的继承性、新生性、旋回性及层控性四大特点和多因复成矿床的成矿模式.     

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

云南官房铜矿床矿石矿物特征及银的赋存状态

通过显微镜鉴定、电子探针(EPMA)及扫描电镜能谱分析(SEM/EDS)等方法,首次对官房铜矿的矿物组合和银的赋存状态进行了研究。初步查明,矿石矿物为中-低温热液成因,并受火山机构及断裂构造的控制;银矿物主要为碲银矿和辉银矿。矿石中银与铜呈明显正相关关系,而方铅矿中不含银。银主要以类质同象的形式赋存于含铜矿物或黄铁矿中;银的独立矿物含量低,且多呈包裹体的形式存在于黄铜矿、斑铜矿及黄铁矿中,或以微细粒状赋存于矿物颗粒间和斑铜矿的表面。     

山东省济宁强磁异常区深部铁矿初步验证及其意义

山东省济宁磁异常是一个重、磁同源体,面积大于100 km2,磁异常峰值为3800nT。钻探验证在孔深1041.57～1796.54m位置发现铁矿体,矿体总厚度74.04～220m,磁性铁平均品位15.89～25.19%。矿石类型有条带状方解磁铁石英岩和条带状磁铁石英大理岩,矿石的主要组成矿物为石英、方解石、磁铁矿、磁赤铁矿、菱铁矿。矿体产于济宁岩群浅变质岩系中,矿床特征与条带状铁建造（BIF）铁矿或鞍山式铁矿有明显区别,铁矿成因类型属与千枚岩、变质中酸性火山岩、大理岩有关的沉积变质型铁矿床。该区铁矿资源潜力巨大。     

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。