广东厚婆坳整装勘查区锡多金属矿资源潜力分析

利用广东厚婆坳整装勘查区内的典型矿床、重点工作区、其他矿床的潜力评价成果,建立了8个定量预测模型区;然后通过综合信息分析,按热液型、斑岩型2种矿床类型在厚婆坳整装勘查区分别圈定并优选了最小预测区,进行资源量估算;最后对最小预测区进行归并整理,形成综合预测区,在此基础上提出了勘查部署建议。     

辽宁省本溪县杨家堡子金矿地质特征及成因浅析

本溪县杨家堡子金矿赋存于早古生代奥陶系马家沟组及寒武系凤山组内,矿体主要围岩为变质程度轻微的碎屑沉积岩及碳酸盐岩,矿体受断裂构造控制,金矿物及载金矿物——黄(褐)铁矿均呈稀疏浸染状分布,金成矿与燕山期二长花岗岩关系密切,具有"卡林型"金矿床地质特征。认为杨家堡子金矿是与早古生代寒武系、奥陶系地层、岩性、岩相(变质相)、断裂构造及燕山期岩浆活动有成因联系的金矿床,对矿体的矿物组合进行分析,初步确定矿化成因应属低温热液型金矿床。     

我国砂岩型铀矿成矿理论的创新和发展

简述了从国外到国内的砂岩型铀矿概况及成矿理论研究的发展,归纳出了我国砂岩型铀矿的"叠合复成因氧化-还原成矿理论",并就"预富集"、"板状矿体成因"、"深部油气作用"、"可地浸概念"、"大砂体"等问题进行了粗浅的讨论。     

火山岩型铀矿山环境地质调查评价方法研究

通过对典型火山岩型铀矿山及周边地区的环境地质调查及样品分析测试,厘定矿山放射性气态、液态、固态源项特征及分布,开展放射性迁移循环途径研究及矿山周边公众潜在附加剂量评价研究,初步建立放射性矿山环境地质调查评价体系。结果表明,该研究可以为查明火山岩型铀矿山开发过程中对环境介质的影响程度和范围提供方法指导。     

云南建水煌斑岩年代学和地球化学及其构造意义

华南大陆内部燕山期的岩浆事件可分为2期:燕山早期180~150 Ma,燕山晚期140~80 Ma。而处于扬子板块西南缘的滇黔贵等地,仅见有第二期晚白垩世中酸性侵入岩与相关成矿作用,缺乏第一期岩浆活动的时间记录。本文在滇东建水地区首次发现了麦地村煌斑岩,对其进行高精度LA-ICP-MS锆石U-Pb定年和主微量元素测试分析。结果显示煌斑岩的锆石U-Pb年龄为(158.4±2.4)Ma(MSWD=4.2),为晚侏罗世的产物,补充了该区较为空白的第一期岩浆热事件。麦地村煌斑岩不相容元素明显高于原始地幔,表现出不同程度的富集,大离子亲石元素Rb、Ba、Ce等富集程度不明显,高场强元素中U、Ta、Pb等表现出一定程度富集,LREE相对富集,HREE相对亏损,不具有Nb-Ta-Ti负异常的俯冲型配分曲线特征,具有明显的OIB型洋岛玄武岩稀土元素配分特征,为板内伸展环境下的产物。滇东地区发育中生代时期的NNE构造,早期NNE向褶皱叠加有后期同方向正断层。早期褶皱表现为SEE-NWW挤压应力作用下的构造特征,后期断层表现出同方向张应力作用下的特征。煌斑岩正是由于该区发生挤压之后伴随着一期应力松弛调整,伸展减压作用诱发地幔物质部分融熔,来自于深处的软流圈地幔流体与岩石圈地幔发生交代作用,形成富集型地幔,交代富集的岩石圈地幔局部受热、部分熔融,发生上升侵位。煌斑岩的侵位时间即是滇东地区中生代从挤压向伸展转换的起始时间。     

温度、饵料种类对中华哲水蚤(Calanus sinicus)油脂积累与生长发育的影响

中华哲水蚤(Calanus sinicus)C5期幼体的油脂积累是种群在黄海冷水团中得以顺利度夏的关键过程。本研究对温度(10°C和19°C恒温,10—19°CⅠ和10—19°CⅡ变温)与饵料种类(硅藻饵料,自然饵料)双因子培养实验进行研究,探讨温度和饵料种类对中华哲水蚤油脂积累与生长发育的影响作用。结果表明,不同的温度和饵料种类对C5期幼体的油脂积累均有影响。C5期幼体在变温组的油脂积累是10°C组的31%—102%,是19°C组的1.8—6.1倍,低温有利于C5期幼体降低个体代谢消耗以增加油脂的积累。在恒温培养下,C5期幼体在硅藻饵料组的油脂积累是自然饵料组的2.8倍,硅藻饵料比自然饵料更有利于油脂的积累。雌体的体长和油囊体积均随着温度的升高而减小。与硅藻饵料相比,在自然饵料组中雌体的性腺发育速度更快,性腺成熟度更高(繁殖指数:58%—65%)。     

胶东金翅岭金矿构造控矿规律及找矿预测

金翅岭金矿是胶东招远北部的一个典型石英脉型金矿,构造是金矿最为重要的控矿因素。在前人资料的基础上,综合分析了矿区构造控矿特征,总结了构造控矿规律:矿脉分支复合,表现为NE向矿脉产生SN,NNE向次级矿脉,NNE向矿脉产生NE向次级矿脉;矿体厚度与金品位呈负相关,深部次级矿脉群在P4脉下盘出现;矿脉侧伏角和倾伏向变化处矿体富集,表现为SW向侧伏的P4矿脉,矿体富集于-240 m,侧伏角变大,同时倾伏向由SW向转变为NW向的部位。最后建立了平面和剖面P4矿脉的波形函数,并对深部进行了预测。     

The Late Triassic I–Type Granites from the Longmu Co–Shuanghu Suture Zone in the interior of Tibetan Plateau, China: Petrogenesis and Implication for Slab Break–Off

The Jiangaidarina granitic mass(JM) is an important part of the magmatic belt in Longmu CoShuanghu Suture Zone(LSSZ) in the central Tibetan Plateau. An integrated research involving wholerock geochemistry, zircon LA-ICP-MS U-Pb ages and Hf isotopic compositions was carried out to define the timing, genesis and tectonic setting of the JM. Zircon LA-ICP-MS U-Pb ages have been obtained ranging from 210 to 215 Ma, rather than the Early Jurassic as previously thought. Fifteen granite samples contain hornblendes and show a negative correlation between P_2 O_5 and SiO_2, indicating that the JM is an I-type granite. All the granites are enriched in LREE relative to HREE, with negative Eu anomalies(Eu/Eu*=0.56-0.81), and have similar trace elements patterns, with depletion of Ba, Nb, Sr and P. These suggest that the JM was fractionated, and this is also proved by the characteristic of negative correlations between oxide elements(TiO_2, MgO, FeOt, MnO, CaO) and SiO_2. Almost all ε_(Hf)(t) values of the granites are between-10.3 and-5.8, implying that the JM has a crustal source intimately related with the South Qiangtang Block(SQB), except for one(+10.2), showing a minor contribution from mantle source.Moreover, relatively low Na_2 O/K_2 O ratios(0.42-0.93) and high A/CNK values(0.91-1.50) reflect that the JM was predominately derived from the medium-high potassium basaltic crust, interacted with greywacke. Our new geochemical data and geochronological results imply that the Late Triassic magmas were generated in a post-collisional tectonic setting, probably caused by slab break-off of the Longmu Co-Shuanghu Tethyan Ocean(LSTO). This mechanism caused the asthenosphere upwelling, formed extension setting, offered an enormous amount of heat, and provided favorable conditions for emplacement of voluminous felsic magmas. Furthermore, the LSTO could be completely closed during the Middle Triassic, succeed by continental collision and later the slab broke off in the Late Triassic.     

FD-600全液压动力头反循环连续取样钻机研制与应用

文章结合国内外CSR取心技术的现状和所生产钻机的特点,为满足国内对空气反循环连续取样（心）、冲击回转、定向钻进等多种高效钻探工艺对钻机的需要,从钻机整体结构设计、整体布局进行详细考量,采用质量可靠的液压件、动力机等外购件,摒弃传统钻机设计周期长、动力小、机械化程度低、对地形和钻探工艺适应性低等特点,研制出了一台高效、可靠、机械化程度较高的FD-600型全液压动力头式反循环取样钻机。在3次野外生产试验中充分体现出了优越性,可满足砂金勘探、工程施工等取心钻探的要求。     

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.