扁铲侧胀试验在滨海沉积软土中的应用

通过运用扁铲侧胀仪(DMT)在长江入海口滨海沉积软土中进行的原位测试,获得滨海沉积软土中扁铲侧胀试验各指标参数的变化规律。扁铲侧胀试验与静力触探试验结果一致,试验结果可靠,且扁铲侧胀试验可以快速地获取侧向基床反力系数KH,为桩基础的设计提供可靠的依据。对比旁压试验结果,扁铲侧胀试验得到的KH值常常偏大。在粘土层、粘质粉土夹粉质粘土、淤泥质粉质粘土、粘质粉土、淤泥质粘土等土层中KH与真实值相差较小,可以使用,但实际应用中应同时结合规范使用;而在砂质粉土和粉砂等土层中KH与真实值相差较大,不宜使用。     

考虑渗透力和原始Hoek-Brown屈服准则时圆形洞室解析解

采用原始Hoek-Brown非线性屈服准则,推导了渗透力作用下圆形洞室弹塑性解析表达式。根据解析公式,绘制了渗透力作用下基于原始Hoek-Brown屈服准则的围岩特性曲线、塑性区半径与洞壁支护力关系曲线、塑性区半径与围岩自重应力关系曲线,并与基于Mohr-Coulomb屈服准则以及不考虑渗透力的图形进行了对比研究,研究表明：应用原始Hoek-Brown屈服准则求出的洞室径向位移和塑性区半径都大于应用Mohr-Coulomb屈服准则求出的结果;在围岩情况较好的条件下基于原始Hoek-Brown屈服准则计算的塑性区半径远大于基于Mohr-Coulomb屈服准则算出的值;渗流效应对地下洞室的塑性区半径和洞壁径向位移的影响十分显著。     

考虑桩周土竖向作用大直径楔形桩纵向振动特性

将桩土系统划分为数量足够多的微元段,相邻微元桩段接触面处的环形凸面与土的相互作用采用单个Voigt体模拟,求得Voigt体的弹簧和黏壶系数。结合相邻微元桩段接触面上的应力平衡条件和位移连续条件,得到修正的阻抗函数递推法,桩身采用Rayleigh杆考虑桩身的横向惯性效应。结合桩底的边界条件,运用拉普拉斯变换和修正的阻抗函数递推法求得了平面应变条件下成层土中考虑桩周土竖向作用时大直径楔形桩桩顶复阻抗的解析解。通过与已有解对比,研究了桩周土竖向作用对桩顶复刚度和桩顶在瞬态激振下的速度响应的影响,并在低频域内详细分析了桩周土的竖向作用与桩土系统参数对桩顶复刚度的影响的耦合作用。     

Zn(II) Ion Biosorption onto Surface of Eucalyptus Leaf Biomass: Isotherm,Kinetic, and Mechanistic Modeling

Bioremediation of Zn(II) by biosorption across aqueous phase on to surface of eucalyptus leaf powder has been investigated in present research work. The adsorptive potential of eucalyptus leaf powder was evaluated as function of pH, temperature, contact time, agitation rate and particle size. Maximum metal ion uptake and percentage removal capacity of eucalyptus leaf powder were 23.5 mg g⁻¹ and 94%, respectively, at optimized pH 5, 20 ± 1°C, contact time 6 h, particle size 0.5 mm and agitation rate 200 rpm. The biomass surface analysis revealed the fact that the biomass surface was heterogeneous and porous in nature. The functional groups like amine, amide, carboxyl, hydroxyl, and methyl groups, significantly important for metal ion binding were present on biomass surface in tremendous amount. Additionally, the Fourier transformation IR spectrum analysis of acid and base activated eucalyptus leaf biomass ruled out all the possibilities of the presence of surface functional groups mentioned above. The reaction rate was studied by applying two rate limiting models pseudo first and pseudo second order. Pseudo second order model was found to be more suitable (R² = 0.998) in comparison to pseudo first order (R² = 0.724). Adsorption equilibrium of batch stirred reaction data fitting shows the dominance of Langmuir isotherm (R² = 0.99) against Freundlich isotherm (R² = 0.887) model with equipartitional involvement of both film and intra particle diffusion as rate limiting steps at differential status of contact time.     

The criterion of gravity wave instability induced by photochemistry in summer polar mesopause region

This paper studies the effect of photochemistry on the gravity wave instability in summer polar mesopause region. The calculation method of the effects of eddy viscosity, conductivity and eddy diffusion of chemical species on the gravity wave instability induced by photochemistry are studied. The critical wavelength of the instability is given in this paper. The influences of some parameters on it are discussed. The study shows that the gravity wave instability induced by photochemistry is sensitive to the temperature and atomic oxygen profiles.     

The ultra‐high pressure coronitic and pseudomorphous reactions in a metagranodiorite from the Brossasco‐Isasca Unit,Dora‐Maira Massif,western Italian Alps: a petrographic study and equilibrium thermodynamic modelling

Metagranodiorite samples from the Brossasco‐Isasca Unit, Dora‐Maira Massif, western Alps, show pseudomorphous and coronitic textures where igneous minerals were partially replaced by ultra‐high pressure (UHP) metamorphic assemblages. The original magmatic paragenesis consisted of quartz, plagioclase, K‐feldspar, biotite and minor phases. During UHP metamorphism, the plagioclase (site P) was replaced by zoisite, jadeite, quartz, K‐feldspar and kyanite, and coronitic reactions developed between biotite and adjacent minerals. At the original igneous biotite–quartz contact (site A), a single corona of poorly zoned garnet is developed, whereas at the biotite–K‐feldspar (site B) and biotite–plagioclase (site C) contacts, composite coronas are formed. Integration of results from petrographic observations, calculations of mineral stoichiometry and thermodynamic calculations of mineral stability has allowed the determination of the metamorphic reactions involved and the estimation of the metamorphic conditions, which reached as high as 24 kbar and 650 °C. Accurate microanalysis by energy‐dispersive spectroscopy (EDS) and statistical analysis of the data allowed us to identify, for the first time in a natural Na‐pyroxene of metagranitoid rocks, the end‐member Ca‐Eskola.     

Estimation and inference in inverse methods for kinetic models of hydrocarbon generation

Procedures based on ordinary and generalized least of squares for the estimation of kinetic parameters in laboratory pyrolysis experiments are compared. When the data consist of measurements on the degree of chemical reaction through time for a number of temperatures, a single regression procedure is preferred to the two-stage regression alternative. Methods are developed for the construction of confidence intervals for calibration curves used to infer formation temperature on the basis of the unreacted fraction of source material.     

Products and Mechanism of the NO<Subscript>3</Subscript> Reaction with Thiophene

Products of the gas-phase reaction of the NO₃ radical with thiophene have been investigated using different experimental systems. On the one hand, experiments have been conducted in our laboratory using two different methods, a Teflon static reactor coupled to a gas chromatograph combined with mass-spectrometry (GC-MS) and a discharge flow tube with direct MS spectroscopic detection. A qualitative analysis in these cases indicates that possible products for the reaction of thiophene+NO₃ at room temperature include: sulphur dioxide, acetic and formic acids, a short-chain aldehyde, 2-nitrothiophene and 3-nitrothiophene. On the other hand, quantitative experiments have been performed in the European Photoreactor (EUPHORE) in Valencia, Spain. In this case, the major products were: HNO₃ (≈80%), nitrothiophenes (≈30%), SO₂ (≈20%), propanal (3%) and a fraction of particles (≈10%). The results obtained indicate that at least 70% of the reaction of NO₃ with thiophene proceeds by an H-abstraction process at room temperature. The mechanism of the reaction studied is proposed on the basis of experimental results.     

Controls of mineral reactions in high-grade garnet–wollastonite–scapolite-bearing calcsilicate rocks: an example from Anakapalle, Eastern Ghats, India

ABSTRACT A suite of garnet-wollastonite-scapolite-bearing calcsilicate granulites from the Eastern Ghats has been investigated to document the controls of mineral reactions during the metamorphic evolution of the deep continental crust. The rocks studied show heterogeneity in modal mineralogy and phase compositions in millimetre-sized domains. Textural relations, and the compositional plots of the phases, established that the clinopyroxene exerts a strong influence on the formation and composition of garnet in the complex natural system. P-T estimates using the vapour-independent equilibria involving garnet define a near isobaric cooling path from c. 850C at c. 5.5–5.2 kbar. The deduced trajectory tallies well with the terminal segment of the overall retrograde P-T path construed from the associated rocks using well-calibrated thermobarometers. The ubiquitous occurrence of wollastonite and scapolite in the main calcsilicate body suggests low a_CO2 during peak metamorphic condition. Fluid compositions constrained from mineral-fluid equilibria of the garnet-bearing assemblages show domainal variations as a function of the compositions of the solid phases, e.g. garnet and clinopyroxene. A quantitative log/_CO2-log/_O2 diagram has been constructed to depict the stability of the different calcsilicate assemblages as functions of the compositions and the behaviour of these fugitive species. The results of the mineral-fluid equilibria and the quantitative fluid/rock ratio calculations, in conjunction with the topological constraints, imply vapour-deficient meta-morphism in the rocks studied. It is argued that f_O2 during peak metamorphism was monitored by the ambient f_O2. Subsequently, during retrogression, different domains evolved independently, whereas the fluid composition was controlled by the mineral-fluid equilibria.     

Aluminous reaction textures in orthoamphibole-bearing rocks: the pressure–temperature evolution of the high-grade Proterozoic of the Bamble sector, south Norway

Aluminous reaction textures in orthoamphibole-bearing rocks from the Froland area, Bamble, south Norway, record the prograde pressure–temperature path of the high-grade Kongsbergian Orogeny (c. 1600–1500 Ma) and the low–mid amphibolite facies overprint during the Sveconorwegian Orogeny (c. 1100–1000 Ma). The rocks contain anthophyllite/gedrite, garnet, cordierite, biotite, quartz, andalusite, kyanite, Cr-rich staurolite, tourmaline, ilmenite, rutile and corundum in a variety of parageneses. The P–T path is deduced from petrographic observations, mineral chemistry and zoning, geothermometry and (N)FMASH equilibria. The results indicate the sequence of metamorphic stages outlined below. (a) An M₁ phase characterized by the presence of strongly deformed andalusite, gedrite and tourmaline. (b) An M₂ phase with the development of kyanite after andalusite and the growth of staurolite associated with strong Na–Al–Mg zoning in orthoamphibole, indicating an increase in pressure (4 8 kbar) and temperature (500° 650°C). (c) Pressure decrease at high P (6–7 kbar) and high T (600–700 °C) during M_3a with the production of cordierite ° Corundum between kyanite, staurolite and orthoamphibole and cordierite growth between corundum and orthoamphibole. (d) Temperature increase to 740 ± 60 °C and 7 kbar; static growth of garnet (M_3b) at the metamorphic climax (peak T). The heat supply necessary to explain the temperature increase between the M_3a and M_3b phases is correlated with synkinematic enderbitic–charnockitic and basic intrusions in the Arendal granulite facies terrain. (e) M_3b metamorphic conditions were followed by an initial isobaric cooling path (early M₄) and late-stage pressure decrease (late M₄). Early M₄ conditions of 6–7 kbar and 550–600 °C, assuming P_H2O < P_total are indicated by a retrograde talc–kyanite–quartz assemblage in late quartz–cordierite veins. Late M₄ conditions of 3–4 kbar and 420–530 °C are inferred from a kyanite–andalusite–chlorite–quartz assemblage in vein-cordierite. The M₁–M₃ stages are interpreted as being the result of the same metamorphic P–T path, which was caused by both tectonic and magmatic thickening. A prolonged crustal residence time is proposed for the Bamble sector before uplift during the later stages of M₄ occurred.