Genetic Programming Approach for Predicting Surface Subsidence Induced by Mining

INTRODUCTIONThe study of surface subsidence resulting fromunderground mining holds significance in view ofbeneficial effects on national economy and people’sliving conditions.As is known,a large quantity ofminerals need to be exploited for modernization con-struction.Mining leads to surface subsidence,someunderground engineering and production facilities aredestroyed accordingly,which blocks the developmentof production and retards people’s living standard.To solve this contradiction,su…     

Kinetics of bubble collision and attachment to hydrophobic solids: I. Effect of surface roughness

Influence of surface roughness of the Teflon plates on kinetics of the bubble attachment was studied. Phenomena occurring during collisions of the air bubble, rising in clean water, with Teflon plates, differing only in their surface roughness, were recorded and analysed using a high-speed camera. Variations of the local velocity of the bubble during the collisions and the time of the bubble attachment were determined. It was found that the Teflon surface roughness was the parameter of a crucial importance for the attachment time of the colliding bubble. Depending on degree of the surface roughness the time of the attachment varied by over order of magnitude (from 3 to over 80 ms). In the case the Teflon surfaces having roughness below 1 μm there were recorded four to five “approach–bounce” cycles prior to the bubble attachment. Moreover, after the first collision the rapid pulsations of the bubble shape (within fraction of millisecond) were recorded. For surfaces of roughness ca. 50 μm and larger the attachment always occurred during the first collision—there was no bouncing observed and the time of the attachment was below 3 ms. It was documented that presence of a micro-bubble at the surface facilitated attachment of the colliding bubble.     

一种近区地表地物重力改正的方法

利用重力等值原理,求物体质心的方法,针对高精度重力测量中常见的地表地形、地物的重力异常影响,提出了一种近区地表地物的改正方法。     

Wavefield continuation datuming using a near surface model

When topography and low velocity zone differences vary greatly, conventional vertical static time shifts will cause wavefield distortion and influence wave equation seismic imaging for seismic data acquired on a complex near surface. In this paper, we propose an approach to datum correction that combines a joint tomography inversion with wavefield continuation to solve the static problem for seismic data on rugged acquisition topography. First, the near surface model is obtained by refracted wave tomography inversion. Second, the wavefield of sources and receivers are continued downward and upward to accomplish datum correction starting from a flat surface and locating the datum above topography. Based on the reciprocal theorem, Huygens＇ and Fresnel principles, the location of sources and receivers, and regarding the recorded data on the surface as a secondary emission, the sources and receivers are upward-continued to the datum above topography respectively. Thus, the datum correction using joint tomography inversion and wavefield continuation with the condition of a complex near surface is accomplished.     

Road Surface Modeling and Representation from Point Cloud Based on Fuzzy Clustering

A scheme for an automatic road surface modeling from a noisy point cloud is presented. The normal vectors of the point cloud are estimated by distance-weighted fitting of local plane. Then, an automati...     

空间大地测量技术实测台站速度场精度分析

利用国际上3个著名的数据分析处理中心CSR、JPL和GSFC给出的3种空间大地测量技术实测的台站运动速度场数据,解算不同空间技术速度场之间的转换参数,即速度场之间的系统差。在扣除两两技术之间速度场的系统差后,用速度场残差计算了空间技术速度场之间的不符值加权中误差作为衡量不同空间技术实测台站速度场的外部检核指标,即外符精度。计算结果表明,VLBI和GPS实测台站地心速度已经达到1 mm/a的精度;SLR实测台站地心速度已经达到2 mm/a的精度。     

A cellular automata model of surface water flow

Previous cellular automata models of surface water flow have been constructed to reflect steady, gradually‐varied flow conditions. While these models are extremely important in showing the near‐equilibrium forms that result from the interactions of water and boundary material, highly dynamic forms and processes require models that represent unsteady flow conditions. In order to simulate unsteady flow in a cellular model of surface water flow, the conservation of mass and the Manning's equations are coupled with an algorithm to delay the movement of water from one pixel to the next until the correct timing is reached. This approach yields highly realistic flood wave hydrographs when compared with flood observations in the Walnut Gulch Experiment Watershed. Coupling this unsteady flow model with simple laws of sediment erosion, transport, and deposition should allow event‐based simulations of watershed and river channel geomorphologic change. Copyright © 2007 John Wiley & Sons, Ltd.     

Evaluation of Electro-Oxidation of Textile Effluent Using Response Surface Methods

In the present investigation, treatment of textile effluent using an electrochemical technique was designed and analyzed using the Box-Behnken method. The influence of individual parameters on electro-oxidation of textile effluent has been critically examined using the response surface method (RSM), and a quadratic model for chemical oxygen demand (COD) reduction has been developed. It has been observed from the present analysis that the predicted values are in good agreement with experimental data with a correlation coefficient of 0.945.     

钻孔应变观测技术发展方向探讨

从大地测量技术、地震观测技术和钻孔应变观测技术３种地面运动观测方法在观测频频带和观测精度方面的互补性,探讨了钻孔应变观测技术的发展方向,指出钻孔应变观测应将观测重点放在周期数十秒到数十天的短临信息频段,同时指出,钻孔应变观测可以同时用于声和高频地震观测,以获取更多的短临信息。