The origin of accretionary lapilli

Experimental investigations in a recirculating wind tunnel of the mechanisms of formation of accretionary lapilli have demonstrated that growth is controlled by collision of liquid-coated particles, due to differences in fall velocities, and binding as a result of surface tension forces and secondary mineral growth. The liquids present on particle surfaces in eruption plumes are acid solutions stable at 100% relative humidity, from which secondary minerals, e.g. calcium sulphate and sodium chloride, precipitate prior to impact of accretionary lapilli with the ground. Concentric grain-size zones within accretionary lapilli build up due to differences in the supply of particular particle sizes during aggregate growth. Accretionary lapilli do not evolve by scavenging of particles by liquid drops followed by evaporation — a process which, in wind tunnel experiments, generates horizontally layered hemispherical aggregates. Size analysis of particles in the wind tunnel air stream and particles adhering to growing aggregates demonstrate that the aggregation coefficient is highly grain-size dependent. Theoretical simulation of accretionary lapilli growth in eruption plumes predicts maximum sizes in the range 0.7–20 mm for ash cloud thicknesses of 0.5–10 km respectively.     

Structure and energy transfer of unstable hot star winds

Due to the instability of the radiation line force, the winds of hot, luminous stars should show a pronounced time-dependence resulting from the nonlinear growth of initially small perturbations. Following the method of Owocki, Castor & Rybicki (1988), we describe the time-dependent wind structure obtained with an independently developed code. Under the central assumption ofisothermality, our results are in very good agreement with the ones by Owocki et al. We find that the response of the wind to periodic base perturbations remains largely periodic, at least up tor 2...3R _* , with no clear evidence of stochastic behaviour.In order to test the foregoing assumption of isothermality and to compute the X-ray emission from models of structured winds, we have also incorporated theenergy equation into our simulations. We encountered the numerical problem that all radiative cooling zones collapse because of the oscillatory thermal instability (cf. Langer et al. 1981). We present a method to hinder this collapse by changing the cooling function at low temperatures. The resulting wind showsresolved cooling zones; but, for a supergiant wind relatively close to the star (r 10R _* ), the macroscopic wind structure is very similar to isothermal calculations. Most of the hot material is caused by shell-shell collisions.     

新疆地区夏季平流层低层风场特征分析及数值模拟

利用2017年6—8月的FNL再分析资料分析了新疆地区夏季平流层低层风场的时空演变特征，开展了平流层低层风场的高分辨率数值模拟和检验。结果表明：新疆地区夏季平流层纬向风随时间的变化存在经向差异，同时准零风层开始和结束的时间也存在经向差异，准零风层开始时间南部地区早于北部地区，而准零风层结束时间则相反。整个夏季新疆地区上空的准零风层处于70～40 hPa之间，其高度随时间呈先降低而后升高的变化趋势。准零风层数值模拟结果表明，模拟的准零风层参数与探空资料分析结果相比二者存在一致的变化趋势，准零风层起始高度的平均绝对误差为467 m，该高度对应的风速均方根误差为1.75 m/s。     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

WAFS产品中GRIB资料中国区产品评估

为了给使用WAFS产品的用户提供量化参考依据，选取WAFS产品中常用区域和层次的GRIB数据，利用由国家气象中心提供的风、温客观分析网格点资料，与WAFS中同时刻的预报场产品（风、温网格点资料），用均方根误差进行数字化形式分析比较。结果表明：WAFS提供的风、温预报，通常是短时效的风、温预报比长时效的风、温预报更接近客观分析场；低层的预报比高层的预报更接近客观分析场；风的预报以v矢量的预报优于u矢量的预报；风的误差主要来源于u矢量的误差。     

冬季浙闽沿岸水分布的短期变动与风的关系初探

利用1999年7月至2003年5月期间的遥感数据,包括AVHRR海表层温度、QuikSCAT风场和风应力数据,在分析4年内月平均遥感温度场和风场特征与历年现场观测所获得的认识一致的基础上,选取2002年002-008天这一连续晴空的时段,尝试建立简单的沿岸冷水影响面积表征方法,初步探讨了冬季台湾海峡浙闽沿岸水分布的短期变动与风应力之间的关系。结果表明,风是决定冬季台湾海峡海表层温度逐日变动的关键因素,日平均SST与风应力的相关系数R2达到0·90。采用温度法(SST≤17℃)和温度空间距平法(≤-1℃)表征的浙闽沿岸水影响面积的变化趋势基本一致,而且影响面积的逐日变动与风应力显著相关,二者的相关系数R2分别达到0·90和0·91。     

Wind and Wave Data Analysis for the Aegean Sea - Preliminary Results

In this paper, a statistical analysis on wind and wave buoy measurements and wind and wave model forecasts obtained during a two-year period (1999-2001) is presented with reference to four characteristic near-shore sites of the Aegean Sea. The measurements are a main product of the "POSEIDON" system aiming at the monitoring and forecasting of the state of the Greek seas, operated by the National Centre for Marine Research (NCMR). Although the two-year period is rather short for a thorough analysis of the local wind and wave climate, yet the obtained results, presented herein for the first time, reveal some interesting features of the corresponding wave and wind characteristics. Comparisons between the measurements and the forecast results are also performed at the locations under consideration. It is found that (i) wind speeds obtained from the POSEIDON weather forecasting system are, in general, in agreement with the measurements, except for high wind speeds which are systematically underestimated, (ii) the WAM model can successfully follow the monthly and over year trend of the evolution of wind and wave characteristics, but face significant problems for efficient sea-state forecasting. Finally, the overall pattern of the wind/wave climate for the entire Aegean Sea as obtained from the models is presented by means of the spatial distribution of the mean annual wind and sea-state intensity.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

南向行星际磁场事件与磁暴关系的研究

利用172-182年IMP-8飞船的太阳风观测资料和相应地磁活动性指数Dst和AE,研究了43个南向行星际磁场事件期间太阳风和磁层的耦合问题. 与这43个事件对应的地磁暴是中等的和强的磁暴(Dst＜-50nT). 结果表明:(1) 在43个事件中有11个(约占25.6髎)紧随激波之后,18个处于激波下游流场中(占42髎),其余14个(占33髎)和激波没有关连. 绝大多数事件都伴有太阳风动压和总磁场强度的增加;(2) 当行星际晨昏向电场强度EI＞-4mV/m时,只引起磁亚暴,对Dst指数没有明显影响. 仅当EI＜-5mV/m时,磁亚暴和磁暴才会同时出现;(3) 太阳风动压的增加会增强能量向环电流的输入,但不是密度和速度单独起作用,而是以PK=ρV2的组合形式影响能量的输入;(4) 虽然行星际磁场(IMF)南向分量BZ对太阳风和磁层的耦合起着关键作用,但IMF的BX和BY分量相对于BZ的大小对太阳风向磁层的能量传输也有一定影响. 当BX、BY相对BZ较大时能量耦合加强.