Predisposition to Induced Seismicity in Some Czech Coal Mines

—Mining-induced seismicity associated with longwall face operations in the Ostrava- Karviná coal mines, Czech Republic, has been investigated in order to establish the conditions leading to a focal zone generation. The study, based on macroseismic and instrumental observations, proved that seismicity is influenced by natural as well as mining conditions. The first group includes the influence of faults, washouts and red beds, while the second one is represented by shaft and/or crosscut safety pillars and various types of remnant pillars. All the cases discussed show that many focal zones are generated in overstressed strata as a consequence of interaction of natural conditions and/or old workings with the active coal face. Received June 18, 1996, accepted March 10, 1997     

Time-dependent, coupled, Ekman boundary layer solutions incorporating Stokes drift

Recent technological advances in current measuring devices has resulted in a large observational database related to wind-driven motions in the upper ocean mixed layer. This has served to highlight the fact that transient motions make up a substantial contribution of the resulting Ekman currents. At the same time, certain discrepancies have emerged between the observed angular deflections of the steady-state currents from the surface wind stress, both at the surface and at sub-surface depths, which cannot be reconciled using the classical Ekman model. This paper seeks to tackle these two issues.First a general analytical method is presented for solving the time dependent horizontal momentum Ekman equations. Analysis of the unsteady terms that arise from simple special cases shows how the evolution proceeds through three stages. At early times, the Coriolis acceleration is insignificant, and the current is unidirectional and deepens through downward diffusion of momentum. Later Coriolis acceleration deflects the current vectors in the upper layers, whilst downward diffusion of momentum continues to deepen the layer. Finally, once diffusion has penetrated down to the depth of the steady-state current, then the transients decay on the inertial or diffusive timescale, depending upon the boundary conditions of the particular problem.In the second half of the paper, a new steady-state model is developed that includes the effects of wind-generated waves, through the action of their Stokes drift on the planetary vorticity. Comparisons between observations and the theoretical predictions, demonstrate that inclusion of the Stokes drift is the key to reconciling the discrepancies in the angular deflections of the steady-state currents. This leads to the conclusion that Ekman layer currents are significantly influenced by the surface waves.     

The Origin and Evolution of Silica-saturated Alkalic Suites: an Experimental Study

Experimental simulation of incremental crystal fractionationof a hy-normative hawaiite indicates that the spectrum of compositionsfrom mildly alkalic hawaiite to sodic rhyolite found in silica-saturatedalkalic suites of the ocean islands and continental hotspotsand rifts can be produced by fractionation at 9·3 kbarwith bulk water contents >     

Mantle Xenoliths from the Southeastern Slave Craton: Evidence for Chemical Zonation in a Thick, Cold Lithosphere

We present the first data on the petrology of the mantle lithosphereof the Southeastern (SE) Slave craton, Canada. These are basedon petrographic, mineralogical and geochemical studies of mantlexenoliths in Pipe 5034 of the Cambrian Gahcho Kué kimberlitecluster. Major types of mantle xenoliths include altered eclogite,coarse garnet or spinel peridotite, and deformed garnet peridotite.The peridotites belong to the low-temperature suite and formedat T=600–1300°C and P= 25–80 kbar in a thick(at least 220–250 km), cool lithosphere. The SE Slavemantle is cooler than the mantle of other Archaean cratons andthat below other terranes of the Slave craton. The thick lithosphereand the relatively cool thermal regime provide favourable conditionsfor formation and preservation of diamonds beneath the SE Slaveterrane. Similar to average Archaean mantle worldwide, the SESlave peridotite is depleted in magmaphile major elements andcontains olivine with forsterite content of 91–93·5.With respect to olivine composition and mode, all terranes ofthe Slave mantle show broadly similar compositions and are relativelyorthopyroxene-poor compared with those of the Kaapvaal and Siberiancratons. The SE Slave spinel peridotite is poorer in Al, Caand Fe, and richer in Mg than deeper garnet peridotite. Thegreater chemical depletion of the shallow upper mantle is typicalof all terranes of the Slave craton and may be common for thesubcontinental lithospheric peridotitic mantle in general. Peridotiticxenoliths of the SE Slave craton were impregnated by kimberliticfluids that caused late-stage recrystallization of primary clinopyroxene,spinel, olivine and spinel-facies orthopyroxene, and formationof interstitial clinopyroxene. This kimberlite-related recrystallizationdepleted primary pyroxenes and spinel in Al. The kimberliticfluid was oxidizing, Ti-, Fe- and K-rich, and Na-poor, and introducedserpentine, chlorite, phlogopite and spinel into peridotitesat P < 35 kbar. KEY WORDS: kimberlite xenolith; lithosphere; mantle terrane; chemical zoning; thermobarometry; Slave craton     

A Sequence of Pan-African and Hercynian Events Recorded in Zircons from an Orthogneiss from the Hercynian Belt of Western Central Iberia--an Ion Microprobe U-Pb Study

Sensitive high-resolution ion microprobe U–Pb dating showsthat a biotite orthogneiss from the Hercynian belt of westerncentral Iberia contains 1000–300 Ma zircon. Older, 1000–570Ma ages within this range represent inherited, detrital materialamong which four age components may be recognized:     

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.     

The 1.80–1.74-Ga gabbro–anorthosite–rapakivi Korosten Pluton in the Ukrainian Shield: a 3-D geophysical reconstruction of deep structure

The deep structure of the gabbro–anorthosite–rapakivi granite (“AMCG-type”) Korosten Pluton (KP) in the northwestern Ukrainian Shield was studied by 3-D modelling of the gravity and magnetic fields together with previous seismic data. The KP occupies an area of ca. 12,500 km² and comprises several layered gabbro-anorthositic intrusions enveloped by large volumes of rapakivi-type granitoids. Between 1.80 and 1.74 Ga, the emplacement of mafic and associated granitoid melts took place in several pulses. The 3-D geophysical reconstruction included: (a) modelling of the density distribution in the crust using the observed Bouguer anomaly field constrained by seismic data on Moho depth, and (b) modelling of the magnetic anomaly field in order to outline rock domains of various magnetisation, size and shape in the upper and lower crust. The density modelling was referred to three depth levels of 0 to 5, 5 to 18, and 18 km to Moho, respectively. The 3-D reconstruction demonstrates close links between the subsurface geology of the KP and the structure of the lower crust. The existence of a non-magnetic body with anomalously high seismic velocity and density is documented. Most plausibly, it represents a gabbroic stock (a parent magma chamber) with a vertical extent of ca. 20 km, penetrating the entire lower crust. This stock has a half-cylindrical shape and a diameter of ca. 90 km. It appears to be connected with a crust–mantle transitional lens previously discovered by EUROBRIDGE seismic profiling. The position of the stock relative to the subsurface outlines of the KP is somewhat asymmetric. This may be due to a connection between the magmatism and sets of opposite-dipping faults initially developed during late Palaeoproterozoic collisional deformation in the Sarmatian crustal segment. Continuing movements and disturbances of the upper mantle and the lower crust during post-collisional tectonic events between 1.80 and 1.74 Ga may account for the long-lived, recurrent AMCG magmatism.     

Slab behaviour and its surface expression: new insights from gravity modelling in the SE-Carpathians

We use lithosphere-scale gravity models to calculate gravity anomalies resulting from oceanic subduction, continental collision, slab steepening, delamination, and break-off. Local isostasy was assumed for determining vertical movements caused by mass changes related to these tectonic processes. Our results show that subduction is accompanied by basin subsidence on the upper plate caused by the heavy lithospheric root of the subducting slab. The basin evolution goes parallel with the slab evolution and shows considerable modifications when the processes at depth change (slab steepening, delamination, break-off). Characteristic gravity anomaly curves were acquired for the different tectonic scenarios. These curves together with other data (e.g. basin evolution on the upper and the lower plate) were used for the reconstruction of the tectonic evolution of the SE-Carpathians which includes Tertiary subduction and collision followed by slab steepening and delamination.     

Active faulting at the Eurasian, North American and Pacific plates junction

The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet.     

Discrimination between climate and human-induced dryland degradation

In this study we present a technique to discriminate between climate or human-induced dryland degradation, based on evaluations of AVHRR NDVI data and rainfall data. Since dryland areas typically have high inter-annual rainfall variations and rainfall has a dominant role in determining vegetation growth, minor biomass trends imposed by human influences are difficult to verify. By performing many linear regression calculations between different periods of accumulated precipitation and the annual NDVI_max, we identify the rainfall period that is best related to the NDVI_max and by this the proportion of biomass triggered by rainfall. Positive or negative deviations in biomass from this relationship, expressed in the residuals, are interpreted as human-induced. We discuss several approaches that use either a temporally fixed NDVI peaking time or an absolute one, a best mean rainfall period for the entire drylands or the best rainfall period for each individual pixel. Advantages and disadvantages of either approach or one of its combinations for discriminating between climate and human-induced degradation are discussed. Depending on the particular land-use either method has advantages. To locate areas with a high likelihood of human-induced degradation we therefore recommend combining results from each approach.