基于遗传算法的线要素自动化简模型

线划要素是地图上大量存在的最基本的地图要素，作为自动综合的一个重要方面，它的化简受到了极大的关注。在分析总结现有线划要素化简方法的基础上，依据遗传算法的基本原理和方法，建立了地图上线划要素的化简模型，并讨论了基于遗传算法的线要素自动化简方法中的关键问题，给出了具体的操作步骤和实验结果。结果表明，利用遗传算法对线要素进行化简能够比较好地保持线要素的整体形状，同时还对点具有很高的压缩率。     

TRMM PR雷达与阜阳雷达降水资料的对比研究

选取了1998年与1999年HUBEX观测资料，将TRMM卫星上的星载降雨雷达PR与阜阳的713数字化天气雷达资料在以下3个方面做了比较：(1)强度场的分布；(2)平均反射率廓线；(3)灵敏度。分析、比较结果可知阜阳雷达在探测灵敏度和水平方向的分辨率要高于PR，但由于波束宽度、衰减和资料转化过程计算误差的原因，其远距离处的观测值与真实值有一定偏差。PR波长短，对衰减敏感，尤其是在垂直方向上经过强衰减后，订正值仍偏小。但由于探测方式的不同PR在水平方向上不存在衰减的问题，且其资料分布均匀，因此提出一种用PR资料来订正地基雷达资料的方法用以提高地基雷达探测的精确度。     

GLONASS导航电文介绍

主要介绍GLONASS导航电文的结构、内容、参数、定义及意义，GLONASS与GPS导航电文的异同。     

自适应GM(1,1)模型进行地表沉降预报

提出采用自适应GM( 1 ,1 )模型进行地表沉降预报 ,并用于兖州某矿形变控制点的沉降预报 ,效果令人满意。说明此模型具有实用价值。     

无验潮模式下的GPS水下地形测量技术

传统的水下地形测量模式定型于利用GPS测定水底点的平面位置,利用测深仪测定水底点的深度,附之以瞬时潮位资料,获得点位的高程。这种模式在上述条件具备的情况下,可取得完满的结果。但当验潮条件不具备时,该模式将不能获得测点的高程。为了弥补这一缺陷,简化工作流程,提高水下地形测量的精度,本文提出了一种无验潮模式下的水下地形测量思想,该思想不用专门测定潮位,而直接利用GPS的RTK测量技术,辅之以姿态测量和补偿,从而获得高精度的水底点高程。该方法被验证是正确的,希望进一步推广应用。     

叶面积指数(LAI)的遥感定量方法综述

总结了当前遥感定量研究叶面积指数(LAI)的两种主要方法:统计模型法和光学模型法,阐述了各自的机理和研究进展,在此基础上,讨论了两种方法的优缺点及未来的发展趋势。     

基于新型机载多角度传感器AMTIS的LAI反演

以实地测量数据为先验知识,利用AMTIS数据对顺义地区的一块小麦地进行了叶面积指数(LAI)反演实验研究,并用实地LAI数据进行了验证。通过利用实测数据作为模型参数,以及对干湿土壤分类和匹配表的调整,使反演结果和反演速度得到了提高。     

应用RMi法估算岩体变形模量

RMR法与Q法是国内外八、九十年代岩体质量和参数估算的常用方法,然而RMR法和Q法对质量较差的岩体不太实用,而RMi法是一种既适用于软岩又适用于硬岩的岩体质量评价和参数估算方法。本文在介绍RMi法基本原理的基础上,对贵州省鱼简河水库坝基岩体变形模量进行确定。     

GPS-measured land subsidence in Ojiya City, Niigata Prefecture, Japan

Land subsidence caused by compression of clay layers in Ojiya City, Japan was measured by global positioning system (GPS) between 1 April 1996 and 31 December 1998.

Three baselines were selected in and around the city, and height difference on a WGS-84 ellipsoid was measured by GPS on each baseline. The ground at the GPS station in the city subsides and rebounds 7 cm every winter and spring, respectively. Measurement accuracy was 9.5 mm standard deviation. Ground water level was observed at a well near the GPS station. Regression analysis between total strain, calculated as ratio of the height difference displacement to the total thickness of the clay layers, and the layers' effective stress change with ground water level change gave good correlation. The slope of regression line 7.0×10⁻¹¹ m²/N was obtained as an average apparent coefficient of volume compressibility of the layers.     

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.