Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.     

波包传播诊断的理论基础和计算方法

文中提出了一种新的利用实际观测资料研究波包传播的诊断方法 (WPD) ,并通过理想资料和实际资料的计算证明了该方法的可用性和广泛性     

转光膜在棉田中的应用试验与示范

1998-1999年对转光膜在和田市定点试验和大田示范，转光膜具有比普通膜更明显的增温及提高棉花苗期抗低温能力、促进棉花生长发育的作用。棉田使用转光膜后，可提高棉花品质，增产增收效果显著。     

近百年中国东部夏季降水的时空变率

利用中国东部25°N以北28个站1880-1999年夏季季降水序列,用旋转复经验正交函数（RCEOF）方法,研究了中国东部地区百年干湿的时空演变规律。结果表明,夏季降水空间变率大值区依次为:长江中下游地区、淮河流域、江南、华北、西南及东北。除西南外的5个关键区大体上反映了从6月到8月夏季雨带自南向北椎进所滞留的地区。旋转空间位相分布揭示了长江中下游地区、江南、东北的旱涝异常主要表现为驻波振动特征;而淮河流域、华北、西南地区显示出降水异常信号具有部分的行波特征。尤其第4空间模显示出旱涝异常信号从东北南部可沿着黄淮下游传到长江下游地区。对于近百年中国东部地区夏季于湿变化,长江中下游地区、淮河流域、华北及东北四个地区都存在20-25年时间尺度的周期振荡;长江中下游地区及华北地区都存在准60年时间尺度的振荡周期;东北地区主要表现出36年时间尺度的振荡周期;淮河流域存在明显的70-80年时间尺度的振荡周期;华北地区存在的11年时间尺度的振荡周期恰好与太阳黑子活动的11年周期相一致。在年代际时间尺度（包括次年代际时间尺度）上,长江中下游、淮河流域及华北地区的夏季降水的变化与太阳活动有显著的正相关。     

当代气候研究计划

就气候系统问题，国际上与气候及其变化有关的重要科学计划、尤其是气候变化及可预报性研究（CLIVAR）计划，作了简要介绍，同时还就气候预测问题作了讨论。     

暴雨时程方程在中吉乌铁路(中国段)暴雨估算中的应用

根据中吉乌铁路（中国段）沿线10多个气象水文观测站40多年（建站至2000年）各历时最大降水量资料，对中吉乌铁路（中国段）暴雨强度进行系统的研究。应用熵气象学导出的暴雨时程方程，预测了中吉乌铁路（中国段）各历时最大降水量。这对于中吉乌铁路（中国段）工程设计和施工及未来铁路客运等具有重要的科学意义和工程价值。     

油田污水中Fe2+,S2-,DO及pH值对HPAM-酚醛CDG成胶性能影响的研究

在对河南油田双河矿区油田污水进行全分析的基础上，研究了污水中Fe^2 ,S^2-，溶解氧（DO）及污水的pH值对有机交联体系聚丙烯酰胺（HPAM）－酚醛胶态分散凝胶（CDG）成胶性能的影响。研究结果表明，Fe^2 ,S^2－，DO及污水的pH值对HPAM－酚醛体系的成胶性能都有影响当ρ（Fe^2 )=1.6mg/L,ρ（S^2-)=0.1mg/L,ρ（DO）=1.6mg/L，HPAM－酚醛体系就不能成胶；随着污水pH值的增大，CDG强度变弱。     

班公湖—怒江构造带西段三叠纪—侏罗纪构造—沉积演化

班公湖－怒江构造带西段在大地构造位置上处于特提斯构造域东端，横跨班公湖－怒江断裂带。三叠纪－株罗纪期间，其构造－沉积演化经历了大陆初始裂谷（T）、原洋裂谷（J1）、残余弧后盆地（J2－J3）阶段。初始裂谷阶段的拉张是呈南断北超的半地堑式由东向西进行的，逐渐形成地堑式原洋裂谷盆地。中晚侏罗世，南部新特提斯洋壳开始北各俯冲,产生的区域挤压应力使原洋裂谷逐渐封闭，裂谷盆地的小洋壳表现出以南向俯冲为主的双向式腑冲，同时伴生区域热沉降，盆地具残余弧后盆地的性质。该阶段,羌南地区发育碳酸盐岩为主的稳定陆缘沉积，冈度斯－念青唐古拉板片北部则形成广泛南超的近源碎屑沉积。     

资源勘查图件计算机辅助编绘系统的结构分析与开发策略研究

如何站在信息系统的高度来进行资源图件计算机辅助编绘系统的快速开发，是资源信息系统领域计算机应用的一个重要研究课题。在结构分析的基础上，将资源图件计算机辅助编绘系统划分为图形数据库，应用图形系统和基础图形系统3个基本部分。对于复杂资源图件的计算机辅助编绘，需要地矿点源信息系统的支持。在基础图形系统上进行专业编绘程序的二次开发是高效建立图件编绘系统的最佳途径，并需注意GIS集成应用，三维可视化，人工智能和参数化设计等方法的运用，而系统平台开发是复杂应用的高级阶段。该思想可应用于煤及油气勘探，工程开发，矿区管理及区域地质等诸多领域的软件开发中。