Numerical simulation of dynamic process of the Tangshan earthquake

In this paper, the new LDDA (Lagrangian Discontinuous Deformation Analysis) method is used in modeling the dynamic process of the MS=7.8 Tangshan earthquake on July 28, 1976 and obtain directly the dynamic and quasi-static dislocations, shear stress drops, fracture velocities of the Tangshan earthquake fault. The simulation shows that the slip history at each point of the fault is different. The displacement vectors at the concave side of the fault is greater than that of the convex side of the fault. The "over shoot" of the fault slip is greatest at the middle part of the fault and attenuates to its ends. The rupture velocities of the fault from the epicenter towards south-west and towards north-east are 3.08 m/s and 1.18 m/s, respectively, the average one is 2.13 m/s. The maximum dynamic and quasi-static dislocations are 7.1 m and 6.2 m respectively, the average quasi-static one on the fault is 4.5 m. The maximum dynamic and quasi-static shear stress drops are 8.1 MPa and 5.4 MPa, respectively, the average quasi-static shear stress drop is 3.9 MPa.We found that the rupture velocities and shear stress are related to the initial stress states of the fault.     

Modelling the effects of temperature and food on individual growth and reproduction of Daphnia and their consequences on the population level

Individual based simulations of population dynamics require the availability of growth models with adequate complexity. For this purpose a simple-to-use model (non-linear multiple regression approach) is presented describing somatic growth and reproduction of Daphnia as a function of time, temperature and food quantity. The model showed a good agreement with published observations of somatic growth (r² = 0.954, n = 88) and egg production (r² = 0.898, n = 35). Temperature is the main determinant of initial somatic growth and food concentration is the main determinant of maximal body length and clutch size. An individual based simulation was used to demonstrate the simultaneous effects of food and temperature on the population level. Evidently, both temperature and food supply affected the population growth rate but at food concentrations above approximately 0.4 mg Cl⁻¹ Scenedesmus acutus temperature appeared as the main determinant of population growth.

Four simulation examples are given to show the wide applicability of the model: (1) analysis of the correlation between population birth rate and somatic growth rate, (2) contribution of egg development time and delayed somatic growth to temperature-effects on population growth, (3) comparison of population birth rate in simulations with constant vs. decreasing size at maturity with declining food concentrations and (4) costs of diel vertical migration. Due to its plausible behaviour over a broad range of temperature (2–20 °C) and food conditions (0.1–4 mg Cl⁻¹) the model can be used as a module for more detailed simulations of Daphnia population dynamics under realistic environmental conditions.     

偏心结构非线性地震反应分析的一种简化方法

本文建立了基于结构状态方程和偏心结构体系的层剪力-扭矩等效屈服EYST面概念的求解平扭耦联非线性地震反应的分离-予估-修正递推算法，编制了相应的计算程序。通过与三个单层偏心结构模型的破坏性地震模拟试验结果的对比，验证了小变形阶段平-扭耦联地震反应算法的实用性和可靠性。算例表明，该程序数据处理量小，运算快捷，便于应用。     

An idealized model study of flocculation on sediment trapping in an estuarine turbidity maximum

Flocculation has an important impact on particle trapping in estuarine turbidity maximum (ETM) through associated increases in particle settling velocity. To quantify the importance of the flocculation processes, a size-resolved flocculation model is implemented into an ocean circulation model to simulate fine-grained particle trapping in an ETM. The model resolves the particle size from robust small flocs, about 30 μm, to very large flocs, over 1000 μm. An idealized two-dimensional model study is performed to simulate along-channel variations of suspended sediment concentrations driven by gravitational circulation and tidal currents. The results indicate that the flocculation processes play a key role in generating strong tidal asymmetrical variations in suspended sediment concentration and particle trapping. Comparison with observations suggests that the flocculation model produces realistic characteristics of an ETM.     

Influence of shear angle on hangingwall deformation during tectonic inversion

Tectonic inversion is a common phenomenon in island arc settings, especially in back‐arc basins. The reactivation of normal faults as thrusts, triggered by tectonic inversion, produces typical inversion fault‐related folds and thrusts in the hangingwall. These hangingwall inversion geometries are affected by two factors: the geometry of the underlying master fault and the angle of inclined simple shear relative to the regional dip of strata, in the case that the deformation is approximated by simple shear. This study employed numerical simulations to analyse the influence of the antithetic shear angle on the geometry of the hangingwall and displacement along the master fault. The simulation results reveal that a steeply inclined shear vector during extension produces a narrow, steep‐sided half‐graben, whereas a gently inclined shear produces a wide, open basin. After tectonic inversion, a tight anticline is formed under steeply inclined shear, whereas an open anticline is formed under gently inclined shear. Antithetic shear results in reduced total displacement along the master fault, and the greater the angle between the shear direction and the regional dip, the greater the displacement along the master fault. Because the deformation geometry of syn‐extension layers is affected by extension followed by contraction, a change in the shear angle during tectonic inversion produces a wide variety of deformation geometries. Comparison of the simulation results with the results of analogue modelling suggests that the shear angle decreases by 5° during the transition from extension to tectonic inversion and that such a change may be commonly observed in natural geological structures. These results highlight the benefits of numerical simulations, which can be used to readily examine a variety of constraining parameters and thereby lead to a better understanding of the mechanism of hangingwall deformation, avoiding erroneous estimates of the amount of fault displacement.     

大倾角煤层分层综采再生顶板破断规律研究

针对大倾角厚软煤层下分层安全综采问题,结合淮南矿区潘北煤矿1212（3）大倾角厚软煤层分层综采下分层工作面地质与工程条件,综合运用基于数字散斑、声发射监测与分布式光纤传感技术的物理模拟试验、基于煤系地层赋存禀赋建模技术的数值模拟试验相结合的研究手段,开展了下分层开采再生顶板破断倾向分区演化、再生岩体变形声发射能量与光纤应变响应规律及应力分布特征研究。结果表明：再生顶板破断由其破断岩块滑移、低中位悬臂梁和高位铰接岩梁断裂组成,双梁破断是引起下分层支架失稳的关键所在。下分层中上部双梁破断声发射能量呈高度聚集且持续时间短,光纤感知低位悬臂梁破断且中上部光纤应变峰值高,下分层中上部是支架与再生顶板稳定性控制的重点区域。下分层下部再生顶板破断岩块充填密实且粒径小,是架间与架前岩块漏冒多发区域。下分层再生顶板中形成高应力组成的应力拱,距采空区高度约30 m,双梁破断主要发生在拱内,拱中岩体破断对支架具有一定的冲垮作用。     

基坑开挖对涉支护结构下穿盾构隧道变形的三维模拟与影响规律研究

依托某大厦基坑支护工程项目,研究深厚软土地层中基坑开挖对涉支护结构下穿盾构隧道变形的影响规律。采用三维有限元数值模拟分析隧道顶部支护桩的长度对支护结构变形和隧道隆起的影响,并将数值模拟结果与现场监测结果进行对比。结果表明：深厚软土地层中基坑开挖对下穿盾构隧道产生了较大的隆起变形;因下穿隧道的影响,隧道顶部支护桩嵌固深度的减小对支护结构的变形和下穿隧道的隆起会产生重要影响,当支护桩底与隧道顶的竖向间距S＞4 m或支护桩边缘与隧道边缘的水平间距S1＞4 m 时,支护桩的踢脚位移和下穿隧道的隆起变形迅速增加。研究成果可为类似工程提供应用参考和理论支撑。     

太湖和大浦河口风成流、风涌水的数值模拟及其单站验证

介绍了太湖风成流和风涌水的数值摸拟工作。使用两种不同水平分辨率的数值模式,利用中日合作研究组在大浦河口实测的水位、湖流和风的资料对模拟结果进行了验证。结果指出,模式对风涌水及流向有较好的预报能力,流速的预报尚待进一步改进。     

Discussion on the dynamic mechanism of Great North China area based on the observed stress data

Introduction The Great North China, located at longitude 106E to 124E and latitude 31N to 42N, in-cludes three secondary active tectonic blocks, Ordos, Yanshan and North China plain (Figure 1). The geological tectonics of these three secondary blocks is much different from each other. As a stable block with high rigidity, the Ordos block is mostly surrounded by down-faulted basins with an inactive interior since Cenozoic, although the fault zones along its boundary are strongly active wi…     

Preliminary study on variation characteristics of ocean tide dynamic stress in crust and its relationship with earthquakes

~~Preliminary study on variation characteristics of ocean tide dynamic stress in crust and its relationship with earthquakes@陆明勇$China Center for Earthquake Disaster Emergency and SAR,Beijing 100049,China @郑文衡$Huazhong University of Science and Technology,Wuhan 430074,China①Strong earthquake catalogues in China. Earthquake catalogues reported monthly by Center for Analysis and Prediction, CEA. ①YI Zhi-gang. Institute of Crustal Dynamics, China Earthquake Administrati…