The mean and turbulence structure simulation of the monsoon trough boundary layer using a one-dimensional model withe-l ande-ε closures

An attempt has been made here to study the sensitivity of the mean and the turbulence structure of the monsoon trough boundary layer to the choice of the constants in the dissipation equation for two stations Delhi and Calcutta, using one-dimensional atmospheric boundary layer model withe-ε turbulence closure. An analytical discussion of the problems associated with the constants of the dissipation equation is presented. It is shown here that the choice of the constants in the dissipation equation is quite crucial and the turbulence structure is very sensitive to these constants. The modification of the dissipation equation adopted by earlier studies, that is, approximating the Tke generation (due to shear and buoyancy production) in theε-equation by max (shear production, shear + buoyancy production), can be avoided by a suitable choice of the constants suggested here. The observed turbulence structure is better simulated with these constants. The turbulence structure simulation with the constants recommended by Aupoixet al (1989) (which are interactive in time) for the monsoon region is shown to be qualitatively similar to the simulation obtained with the constants suggested here, thus implying that no universal constants exist to regulate dissipation rate. Simulations of the mean structure show little sensitivity to the type of the closure parameterization betweene-l ande-ε closures. However the turbulence structure simulation withe-ε. closure is far better compared to thee-l model simulations. The model simulations of temperature profiles compare quite well with the observations whenever the boundary layer is well mixed (neutral) or unstable. However the models are not able to simulate the nocturnal boundary layer (stable) temperature profiles. Moisture profiles are simulated reasonably better. With one-dimensional models, capturing observed wind variations is not up to the mark.     

超声回弹综合法检测单一构件混凝土强度推定值的保证率分析

在实际工程检测数据的基础上,利用M on te C arlo试验对单一构件混凝土强度推定值的保证率问题进行了分析。30片梁板实测数据分析结果表明:将构件各测区混凝土强度换算值的最小值作为该构件的混凝土强度推定值的保证率范围为79.0%~94.2%,小于《超声回弹综合法检测混凝土强度技术规程》(CECS 02:88)规定的95%保证率要求,因此,对结构性能鉴定而言该混凝土强度推定值是偏于不安全的,应引起试验检测人员的充分重视。     

辐射应力对台风风暴潮预报的影响和数值研究

台风过程期间,风暴潮和海浪是相伴相生的,相互作用的.波致辐射应力对于近岸风暴增、减水起着十分重要的作用,传统的海浪模式计算辐射应力耗时较多,不能满足业务化预报的要求.根据已有波浪辐射应力的理论表达式,经过严密的数学推导,适当的简化处理,提出了一个较为简单的波浪辐射应力表达式,并将其应用到业务化风暴潮数值预报模式中去,通...     

黄海绿潮应急溯源数值模拟初步研究

基于三维全动力POM 海洋模式, 根据2008 年6 月1 日海监飞机监测绿潮所在位置, 采用拉格朗日粒子追踪法反向积分, 追溯绿潮来源。数值模拟结果显示, 回溯至5 月中旬, 绿潮主要来源于黄海南部江苏连云港和盐城近海海域。黄海绿潮溯源数值模拟, 为政府相关部门了解绿潮的源头, 并采取相应的措施提供依据, 进而为保护生态环境、防灾减灾做贡献。     

基于水电比拟方法的山东南四湖上级湖流场研究

利用水电比拟方法模拟了南四湖流场结构。同时,基于HAMSOM模式,对其流场进行了数值模拟,所得结果与水电比拟结果一致,两者平均相关系数在0.94以上,表明水电比拟实验技术路线可行,流场基本结构准确。该方法适用于低流速大流场的模拟。流场结构分析表明,湖区流速在汛期为cm/s量级,非汛期仅为mm/s量级。其中,在南阳湖北部...     

象山港余流特征数值研究

基于Delft3D-Flow模块建立了象山港海域的三维斜压潮流数值模型,结合实测水文资料,研究了象山港的潮(余)流特征,对欧拉余流场的时空分布进行了定量的比较和分析,并与潮流测站计算分析得到的欧拉余流分布对比,很好的模拟了象山港的余流特征。结果表明:由湾外至湾顶,余流呈减小的趋势,湾外余流最大为33 cm/s,湾顶最小,余流平均仅5 cm/s。垂向上,表层余流大于底层余流,表层余流指向湾外,而底层余流则指向湾内。对比斜压、正压两种模式下的欧拉余流分布,可以看出湾顶附近主要受径流控制,两种模式得到的结果基本一致,口门至西沪港区域受径流和潮流的共同影响,斜压模式更准确地模拟出了水体层化和垂向余环流结构。     

海上溢油油膜厚度实验室模拟和理论模型对比研究

溢油量是衡量溢油规模的关键指标,是处理溢油事故的重要依据。油膜厚度是确定溢油量的基本前提,是一个尚未解决的国际难题。实验室中模拟了不同阶段和不同环境条件下扩展油膜的厚度变化特征。结果表明,实验室模拟与理论模型分析具有基本一致的变化趋势,扩展速度与扩展时间成反比;温度是影响油膜厚度的重要因素,相同条件下,温度越高,油膜厚度越小;海水盐度会影响溢油扩展,但这种影响并未延伸到对油膜厚度的控制上。由于实验室模拟限定在平静海面条件下,并未考虑风和海流等扩展中不容忽视的因素,故与理论构建模型相比系数相差较大。通过对比分析,前期构建的理论模型更能准确地反映海洋溢油的实际情况,加之在实例验证中的较高准确性,该模型具有业务化实施和广泛推广的潜力。     

Numerical study for vegetation effects on coastal wave propagation by using nonlinear Boussinesq model

The vegetation has important impacts on coastal wave propagation. In the paper, the sensitivities of coastal wave attenuation due to vegetation to incident wave height, wave period and water depth, as well as vegetation configurations are numerically studied by using the fully nonlinear Boussinesq model. The model is based on the implementation of drag resistances due to vegetation in the fully nonlinear Boussinesq equation where the drag resistance is provided by the Morison’s formulation for rigid structure induced drag stresses. The model is firstly validated by comparing with the experimental results for wave propagation in vegetation zones. Subsequently, the model is used to simulate waves with different height, period propagating on vegetation zones with different water depth and vegetation configurations. The sensitivities of wave attenuation to incident wave height, wave period, water depth, as well as vegetation configurations are investigated based on the numerical results. The numerical results indicate that wave height attenuation due to vegetation is sensitive to incident wave height, wave period, water depth, as well as vegetation configurations, and attenuation ratio of wave height is increased monotonically with increases of incident wave height and decreases of water depth, while it is complex for wave period. Moreover, more vegetation segments can strengthen the interaction of vegetation and wave in a certain range.     

天海达工程建设对附近海域水环境影响预测分析

运用三维海洋模型FVCOM(Finite-Volume Coastal Ocean Model),采用有限体积计算方法,引入了"干、湿"判断,建立了天海达工程附近海域的三维潮流和泥沙输移模型,预测分析了天海达工程建设后对附近海域水动力和地形冲淤的影响。结果表明工程建设后对其西侧潮流影响较大,东侧与南侧影响较小,且随着距离的增加,影响程度减小,在距离工程1200 m以外海域流速相对变化值大约在8%以内;工程建设前后,静风条件下,工程附近海域地形变化趋势基本一致,但由于岸线的改变,工程东西两侧500m范围内近岸海域淤积程度增大,淤积增大幅度范围为0.05～0.1 cm/a。     

Probabilistic modelling of long-term beach evolution near segmented shore-parallel breakwaters

This paper presents a new framework for probabilistic modelling of long-term beach evolution in the vicinity of detached breakwaters. The study focuses on the key physical processes contributing to beach variability over a range of spatial and temporal scales. Based on a one-line model, the framework is enhanced with sophisticated solutions for beach-wave-structure interaction, diffraction together with a treatment of varying tide level. The sediment transport rate is calibrated at regional and local levels using data from bespoke field campaigns and site-specific coefficients are proposed. Monte Carlo simulation is conducted for long-term shoreline simulation under a sequence of time varying sequence of waves, currents and tidal levels. The results of the Monte Carlo simulation give an insight into the statistical characteristics of beach behaviour within the defence system. In particular, regions within the scheme that are relatively stable and those that exhibit greater natural fluctuations are identified.