3-D BAROCLINIC NUMERICAL SIMULATION OF THE SOUTH CHINA SEA I. UPPER CIRCULATION

A three-dimensional baroclinic shelf sea model was employed to simulate the seasonal characteristics of the South China Sea (SCS) upper circulation. The results showed that: in summer, an anticyclonic eddy, after its formation between the Bashi Channel and Dongsha Islands in the northeastern SCS, moves southwestward until it disperses slowly. There exists a northward western boundary current along the east shore of the Indo-China Peninsula in the western SCS and an anticyclonic gyre in the southern SCS. But at the end of summer and beginning of autumn, a weak local cyclonic eddy forms in the Nansha Trough, then grows slowly and moves westward till it becomes a cyclonic gyre in the southern SCS in autumn. At the beginning of winter, there exists a cyclonic gyre in the northern and southern SCS, and there is a southward western boundary current along the east shore of the Indo-China Peninsula. But at the end of winter, an anticyclonic eddy grows and moves toward the western boundary after forming in the Nansha Trough. The eddy‘s movement induces a new opposite sign eddy on its eastern side, while the strength of the southward western boundary current gets weakened. This phenomenon continues till spring and causes eddies in the southern SCS.     

Numerical simulation for settlement urban tunnel construction

The excavation for the municipal tunnel will disturb the soil around the tunnel, and the deformation and subsidence of the earth surface always take place, which may lead to instability and even collapse for the building above the tunnel. At the same time the deformation and subsidence of the earth surface affect the normal use of underground municipal pipelines, and may cause the road sudden collapse, leading to significantly traffic accidents. The authors did a research by simulating for the excavation of municipal tunnel and designed the related supporting plan, and put forward some suggestions and measures for the design and construction of urban tunnel.     

波纹开缝翅片管换热器传热与流动性的数值模拟

提出一种波纹开缝翅片管换热器,对其传热与流动特性进行三维数值模拟,选择Re范围在1 000到5 000时与平板开缝翅片的模拟相比较。结果表明,在Re小于2 752时,平板开缝比波纹开缝的换热效果好,而Re大于2 752时,波纹开缝比平板开缝换热效果更好,并且波纹开缝翅片管换热器的流动阻力小于平板开缝,因此,Re大于2 752时波纹开缝比平板开缝综合效果更好。     

�봨8.0������ͬ���������α�ЧӦģ��

???????λ??????????е???????????????????Ms8.0???????????????????仯?????????????????????λ????????????????????????α?仯?????????????????????????????????????????仯????,????????????????????????????????????α?????????????????????????????仯?????10??10 ^-8 ms ^-2???￡??????????仯??????????50??10 ^-8 ms ^-2?????????????????????????     

Development and application of simulation technique for hydrokinetic hammer

The computer simulation is an important method for hydrokinetic hammer design. Various kinds of simulation measures with their technical characters and applications being taken during the computer aided design are enumerated. Computer simulation supports plenty of valuable references to the designer. Each type of simulation process is used to explore the exact aspect of the performance of hydrokinetic hammer and each type of simulation method has its own excellences and deficiencies. Thus the integrative simulation methods based on modern computational technology are brought forward to obtain the perfect capability of the whole product. Along with the development of computer hardware and software, various kinds of platforms have been provided to different simulation methods that can be carried out with distinct working flows. The jet flow element is the core part of the hydrokinetic hammer. We can build the ideal simulation model of it by means of CFD (computational fluid dynamics) technology. On the other hand, to set up the digital model of piston and hammer, the best way is to build the virtual prototype using automatic dynamic analysis of mechanical system. As a result of the argumentation, we think the technique of Virtual Prototype and CFD are the prime way to process the combined computer simulation for hydrokinetic hammer.     

青藏高原东北缘断层活动变形的模拟研究

分析和讨论了位错理论模型的发展历史和应用领域，采用走滑和倾滑位错理论模型对青藏高原东北缘的多组断层活动产生的三维形变场进行了数值模拟研究，并将数值模拟结果与该地区1999～2001年间的GPS观测结果进行了对比分析。得出了甘青块体顺时针转动等一些较重要的结论和认识。     

导线环垂直激发场高精度数值模拟

导线环垂直激发场是导线环在地下产生的激发场中垂直于地磁场的分量,在地面核磁共振找水方法中,垂直激发场在地下的分布直接决定地面核磁共振响应,探讨影响垂直激发场地下分布的诸因素进而研究这些因素对地面核磁共振响应的作用,对核磁共振找水正确野外施工具有一定的指导意义,有助于采集更高质量的野外数据.利用经典Chave算法对含有贝塞尔函数的强振荡积分核进行了数值积分试验,将其计算结果和对应的解析解进行了对比,试验结果显示该算法用于强震荡函数无穷积分的计算具有良好的收敛性、较高的精度和较快的计算速度,采用Chave算法对含有贝塞尔函数的强振荡函数进行积分是可行的.在此基础上,进一步计算并数值模拟了导线环垂直激发场及其相位,分别从地磁倾角、磁偏角、地下介质导电性、深度等方面探讨了影响垂直激发场及其相位分布的主要因素.     

数值模拟研究二叠纪峨眉山玄武岩浆在四川盆地的热效应

四川盆地是我国重要的含油气盆地,其西南部位于峨眉山大火成岩省的外带,二叠纪峨眉山玄武岩浆对四川盆地热历史及烃源岩热演化的影响一直备受关注.近年来,盆地古温标结果揭示出盆地在二叠纪存在高古热流（75~85 mW·m^-2）,甚至部分点位存在超高古热流（97~114 mW·m^-2）,被认为和峨眉山玄武岩浆的热效应有关.为了解这些高-超高古热流的成因机制,以及溢流到地表的玄武岩浆对二叠系及以下地层和烃源岩的热影响,本文采用二维有限元方法对二叠纪峨眉山玄武岩浆的热效应进行了模拟,得出如下结论：（1）置于岩石圈底部的地幔柱头高温异常体和挤入地壳底部的高温玄武岩浆在短期内（4 Ma内）对地表热流的扰动分别小于5 mW·m^-2和20 mW·m^-2,均无法解释四川盆地二叠纪的异常古热流.（2）古热流与侵入到地壳内部的岩浆有关,中心在7~17 km深度的不同形态的岩浆都有可能造成高或超高古热流的形成,引起超高古热流的水平状岩浆囊厚度在2~10 km,表层距地表在6~12 km之间.（3）地表岩浆越厚、下伏地层越浅,岩浆对该地层产生的热扰动越大,其中烃源岩所受影响也越大.如,上覆岩浆厚度为300 m时,在深度300 m（二叠系）、800 m（奥陶系）、1250 m（寒武系）、2000 m（震旦系）地层引起的最大升温分别是241℃、77℃、40℃和19℃,所需时间分别为2100年、6100年、1.17万年和2.56万年.（4）相变热的存在对二叠系和奥陶系地层不可忽略,如300 m厚岩浆产生的相变热可以使二叠系地层额外增温达55℃.

     

某核废物填埋区土壤对Sr吸附的动态模拟实验研究

目前,我国处理极低放废物采用的是就近地质填埋的方法,通过选择合适的吸附材料及添加剂,建立人工屏障,以最大限度地阻滞核素进入与人类生活有关的自然环境中。这里通过研究某地土壤对Sr的吸附,做了动态模拟试验,建立了动态模型,进行不同高度柱体的对比实验。经实验表明：填埋区土壤TY29＋1％人造沸石作为填埋场屏障材料,可营造“碱性～还原”氛围,对阻滞Sr迁移非常有效。不同高度柱体对比实验表明：当柱高度之比为1：2：3,C／C0=0．5时,其累计输出的流量之比为1：1．96：2．16,平均渗透系数分别为：0．62、0．52、0．54。由此可见,随高度增加,吸附性能呈增高的趋势,且柱体渗透性降低。在柱体吸附一段时间后,三个柱的吸附能力都出现了减小的突越,这与在吸附过程中前期为物理吸附进行的较快,后期为化学吸附进行的较慢有关。     

利用GNSS测量射电望远镜参考点的仿真分析

高精度测量射电望远镜参考点和轴线偏差等参数,对建立天线指向模型和本地连接参数、提高测站坐标精度等具有重要意义。为完成新建射电望远镜参考点初始参考值的快速测定,根据望远镜的旋转模型,结合常规静态归心测量方法和随机动态测量方法,提出了一种利用GNSS天线代替测量靶标实现望远镜参考点测量的方法。通过仿真分析验证了该方法的合理性和有效性,并分析了数据点个数和数据点测量精度对天线参考点和轴线偏差解算精度的影响。