Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.     

Comparison of amplitude decay rates in reflection,refraction, and local earthquake records

Three types of seismic data recorded near Coalinga, California were analyzed to study the behavior of scattered waves: 1) aftershocks of the May 2, 1983 earthquake, recorded on verticalcomponent seismometers deployed by the USGS; 2) regional refraction profiles using large explosive sources recorded on essentially the same arrays above; 3) three common-midpoint (CMP) reflection surveys recorded with vibrator sources over the same area. Records from each data set were bandpassed filtered into 5 Hz wide passbands (over the range of 1–25 Hz), corrected for geometric spreading, and fit with an exponential model of amplitude decay. Decay rates were expressed in terms of inverse codaQ (Q _c ^–1 ).Q _c ^–1 values for earthquake and refraction data are generally comparable and show a slight decrease with increasing frequency. Decay rates for different source types recorded on proximate receivers show similar results, with one notable exception. One set of aftershocks shows an increase ofQ _c ^–1 with frequency.Where the amplitude decay rates of surface and buried sources are similar, the coda decay results are consistent with other studies suggesting the importance of upper crustal scattering in the formation of coda. Differences in the variation ofQ _c ^–1 with frequency can be correlated with differences in geologic structure near the source region, as revealed by CMP-stacked reflection data. A more detailed assessment of effects such as the depth dependence of scattered contributions to the coda and the role of intrinsic attenuation requires precise control of source-receiver field geometry and the study of synthetic seismic data calculated for velocity models developed from CMP reflection data.     

山西定襄七岩泉新旧测氡仪水氡测值稳定性及映震分析

2014年山西定襄七岩泉新增BHC-336智能定标器,对新、旧2套测氡仪的水氡测值,就稳定性、数据一致性、内在质量等进行对比分析,结果显示,因存在系统误差,2台测氡仪水氡测值稳定性均值存在差异,测量精度和性能具有一致性;与新测氡仪相比,旧测氡仪水氡测值相对偏差和均值标准误差更小,精度更高,数据相关程度较高,数据稳定性更好。定襄水氡对华北5级以上地震具有较好的映震能力,新测氡仪对2016年4月7日原平4.6级地震映震效能比旧测氡仪灵敏。     

二维勘探新观点

应用大容量、大道数地震仪,改变传统二维地震排列方式,由单线排列接收改为多线排列接收。根据勘探精度的要求、测线网度的不同分二种方式:一是适合于大网度概查普查的单条测线多线排列接收;二是适合于精查和采区二维地震的多条测线多线排列接收方式。     

Şarköy-Mürefte 1912 Earthquake's Tsunami, extension of the associated faulting in the Marmara Sea, Turkey

The historical tsunamis in the Marmara Seawere mainly caused by earthquakes andneeded to be documented. Following 1999Izmit earthquake occurred at the EasternMarmara region, a complete inventory ofactive faults in the Marmara Sea regionbecame much more stressed. To the west, thelatest event is 09.08.1912arköy-Mürefte Earthquake. Itoccurred on the active Ganos Fault zone andwas one of the largest earthquakes in theBalkans. The eastern termination of theassociated faulting is in the deep WestMarmara Trough, westernmost of thesuccessive basins forming the Marmara Sea.On the basis of recent multibeam bathymetryand seismic reflection data, estimatedtotal length of the surface rupture isabout 56 km. The historical data reviewedfrom library and archive documents,geological field surveys and offshoregeophysical investigations have shown thatthe 1912 earthquake produced a tsunami. Inaddition a seabed dislocation, the sourceof 1912 tsunami can also be assigned to thesediment slumps appearing in the form ofechelon landslide prisms along the southernslopes of the West Marmara Trough.     

Isolated versus common envelope dynamos in planetary nebula progenitors

The origin, evolution and role of magnetic fields in the production and shaping of proto-planetary nebulae (PPNe) and planetary nebulae (PNe) are a subject of active research. Most PNe and PPNe are axisymmetric with many exhibiting highly collimated outflows; however, it is important to understand whether such structures can be generated by isolated stars or require the presence of a binary companion. Towards this end, we study a dynamical, large-scale α−Ω interface dynamo operating in a 3.0 M_⊙ Asymptotic Giant Branch (AGB) star in both an isolated setting and a setting in which a low-mass companion is embedded inside the envelope. The back reaction of the fields on the shear is included and differential rotation and rotation deplete via turbulent dissipation and Poynting flux. For the isolated star, the shear must be resupplied in order to sufficiently sustain the dynamo. Furthermore, we investigate the energy requirements that convection must satisfy to accomplish this by analogy to the Sun. For the common envelope case, a robust dynamo results, unbinding the envelope under a range of conditions. Two qualitatively different types of explosion may arise: (i) magnetically induced, possibly resulting in collimated bipolar outflows and (ii) thermally induced from turbulent dissipation, possibly resulting in quasi-spherical outflows. A range of models is presented for a variety of companion masses.     

论三维等时线叠加反偏移中的有关问题

利用几何射线理论和一种考虑了积分域边缘贡献的二维稳想法，研究了三维等时线叠加反偏移中的反偏移场，反偏移加权函及反偏移孔径。结果证明，在有限孔径条件下，反偏移场的结构比已发表的结果要复杂和多。即使在最简单的条件下，反偏移场也是由反偏移信号的反偏移噪声（孔径效应）叠加而成的。而且，反偏移场的结构强烈地依赖于反偏移孔径边缘的位置。为了消除孔径效应，应采用最佳反偏移孔径和针对有限孔径的加权函数。根据定义，最佳反偏移孔径为稳相点的第一和第二Fresnel区之和。在第一Fresnel区内，有限孔径和加权函数与文献中所给出的加权函数完全一致。而在第二Fresnel区内，有限孔径加权函数为常规的加权函数与一窗函数的乘积。在反偏移孔径的边缘上，有限孔径加权函恒取零值。     

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.     

Virtual wave gauges based upon stereo imaging for measuring surface wave characteristics

A virtual wave gauge (VWG) technique based on stereo imaging is developed to remotely measure water wave height, period, and direction. VWG minimizes computational costs by directly tracking the elevation of the water surface at selected points of interest using a Eulerian based dynamic searching algorithm. Results show that the VWG technique developed in this paper dramatically improves efficiency by two orders of magnitude compared to the traditional Lagrangian–Eulerian based point cloud method of stereo image processing. VWG is tested against traditional wave wire gauges to within 98% accuracy for significant wave height. Furthermore, the flexibility of the VWG is demonstrated in two field applications. First in an offshore breaking wave case, an array of VWGs is used to efficiently measure wave directionality. Second to investigate the reflection coefficient of a rock-mounted structure interacting with nearshore waves, linear and spatial VWG arrays are designed and implemented based on a priori information of the wave field from a preliminary VWG measurement. Overall, we demonstrate that the flexible and computational efficient VWG technique has the potential to make real-time remote stereo imaging wave measurements a reality.     

Elastic waves at a corrugated interface between two dissimilar fibre‐reinforced elastic half‐spaces

The reflection and transmission phenomena of elastic waves incident at a corrugated interface between two dissimilar fibre‐reinforced elastic half‐spaces have been analysed. Using Rayleigh method of approximation, the expressions of the reflection and transmission coefficients are obtained in closed form for the plane interface as well as for the first order approximation of the periodic interface ζ = d cos px. All these reflection and transmission coefficients of regular and irregular waves are found to be the functions of angle of incidence and elastic parameters of the media. Moreover, the coefficients of irregularly reflected and transmitted waves are found to be proportional to the amplitude of the corrugated interface and are functions of the frequency of the incident wave. Numerical computations have been performed for a specific model to compute these coefficients and results obtained are shown graphically. The results of Singh and Singh (Sadhana 2004; 29 :249–257) and Ben‐Menahem and Singh (Seismic Waves and Sources. Springer: New York) have been derived from our analysis as particular cases. Copyright © 2006 John Wiley & Sons, Ltd.