InSAR相位解缠算法的比较

相位解缠作为合成孔径雷达干涉测量(InSAR,Interferometric Synthetic Aperture Radar)中一个关键的步骤,为获取地形高程提供了基础。相位解缠的质量将直接影响着DEM生成的质量。对现有的几类算法进行实验分析,并对解缠结果的质量进行比较,分析其精确性。结果表明:统计耗费网络流算法具有较好的解缠连续性以及较高的精度,可以获得一个较优的全局解。     

PMODTRAN: a parallel implementation based on MODTRAN for massive remote sensing data processing

MODerate resolution atmospheric TRANsmission (MODTRAN) is a commercial remote sensing (RS) software package that has been widely used to simulate radiative transfer of electromagnetic radiation through the Earth's atmosphere and the radiation observed by a remote sensor. However, when very large RS datasets must be processed in simulation applications at a global scale, it is extremely time-consuming to operate MODTRAN on a modern workstation. Under this circumstance, the use of parallel cluster computing to speed up the process becomes vital to this time-consuming task. This paper presents PMODTRAN, an implementation of a parallel task-scheduling algorithm based on MODTRAN. PMODTRAN was able to reduce the processing time of the test cases used here from over 4.4 months on a workstation to less than a week on a local computer cluster. In addition, PMODTRAN can distribute tasks with different levels of granularity and has some extra features, such as dynamic load balancing and parameter checking.     

Verification and Correction of Cloud Base and Top Height Retrievals from Ka–band Cloud Radar in Boseong,Korea

In this study,cloud base height(CBH) and cloud top height(CTH) observed by the Ka-band(33.44 GHz) cloud radar at the Boseong National Center for Intensive Observation of Severe Weather during fall 2013(September-November) were verified and corrected.For comparative verification,CBH and CTH were obtained using a ceilometer(CL51) and the Communication,Ocean and Meteorological Satellite(COMS).During rainfall,the CBH and CTH observed by the cloud radar were lower than observed by the ceilometer and COMS because of signal attenuation due to raindrops,and this difference increased with rainfall intensity.During dry periods,however,the CBH and CTH observed by the cloud radar,ceilometer,and COMS were similar.Thin and low-density clouds were observed more effectively by the cloud radar compared with the ceilometer and COMS.In cases of rainfall or missing cloud radar data,the ceilometer and COMS data were proven effective in correcting or compensating the cloud radar data.These corrected cloud data were used to classify cloud types,which revealed that low clouds occurred most frequently.     

Study of high temperature targets identification and temperature retrieval experimental model in SWIR remote sensing based Landsat8

For surface features in short-wave infrared (SWIR, 1.3–3.0 μm) in remote sensing imagery, pixel values depict the total energy including reflection and emission. For surface features at normal temperature in SWIR band, emission energy can be ignored. While for surface features at high temperature in SWIR band, emission energy is equal to or even higher than the reflection energy. So remote sensing imagery of SWIR band can be used to separate emission and reflection energy as well as to realize temperature retrieval of high temperature targets. In this study, the seventh band (SWIR band) of Landsat8 OLI remote sensing imagery is used to perform the theoretical model research for temperature retrieval of high temperature targets. In the meantime, it is also used with the corresponding observation experiment of synchronization satellite to check the theoretical model. The result shows that the radiant flux density for mixed pixels with high temperature targets is higher than adjacent pixels without high temperature targets. Thus, the high temperature pixels can be identified in SWIR band. The retrieval results of temperature and fractional area for high temperature targets are consistent with reality. In the study, the result illustrates that it is effective to identify high temperature targets in remote sensing imagery of SWIR band and the model is appropriate for temperature retrieval use.     

干涉图像第二类统计Goldstein自适应滤波方法

干涉图滤波是InSAR数据处理中的关键步骤之一,滤波结果的优劣会直接影响到相位观测的质量和最终产品精度。本文结合干涉图滤波算法的研究进展,对Goldstein频率域滤波及其经典改进算法进行了系统分析和比较,在此基础上提出了一种基于第二类统计的稳健相干性估计量的Goldstein自适应滤波方法。本文采用模拟数据和Envisat ASAR真实数据与现有方法进行了验证,试验结果表明,新的滤波方法在保持细节和抑制噪声方面优势更加明显。     

SAR影像与光学影像的高斯伽玛型边缘强度特征匹配法

提出了一种基于影像边缘强度图描述的SAR影像与光学影像匹配方法。首先对影像进行粗纠正,消除影像之间的尺度和旋转变化;其次,改进相位一致性特征检测方法,提取对影像相干斑噪声稳健的特征点;然后基于高斯伽玛型双边窗口比值算子计算影像边缘强度图,在此基础上构造不变特征描述符;最后联合几何约束条件,实现SAR影像与光学影像匹配。试验结果证明,与现有方法相比,本文方法能够大幅提高SAR影像与光学影像匹配结果中的正确匹配特征数量以及影像配准精度。     

多光谱遥感影像亮度空间相位一致性特征点检测

提出了一种基于亮度空间和相位一致性理论的多光谱遥感影像特征点检测算法。首先利用参数自适应的灰度变换函数建立影像亮度空间;然后结合相位一致性方法在影像亮度空间进行候选特征点检测,并将候选特征点映射到原始影像上进行非极大值抑制;最后在尺度空间计算特征点的特征尺度值。本文方法有效结合了亮度空间特征检测和相位一致性特征检测的优势,对多光谱遥感影像的辐射变化具有较强的稳健性。试验结果证明,与传统特征点检测算法相比,本文方法在特征重复率和重复特征数量方面都具有明显的优势。     

基于载波相位的GPS周跳恢复方法研究

在GPS定位中,周跳的探测和修复是获得高精度定位结果的前提。针对载波相位周跳数据的探测和修复这一问题已经提出了很多方法,但都有各自的不足之处。文中针对恶劣环境下的载波相位定位问题,通过使用多个历元的数据构建方程,提出一种新的整周模糊度定义方法,并预期能够在仅有3颗可用卫星且周跳发生时实现快速、准确的定位。     

太湖地区HJ-1卫星CCD数据反演气溶胶及大气校正

针对HJ-1卫星CCD数据,利用改进的暗像元法反演气溶胶光学厚度(AOD),再利用反演的AOD对其进行大气校正。将反演的气溶胶与地基太阳光度计数据进行对比验证,发现当反演的AOD值大于0.2时,反演值与地基观测值的相关系数为0.964,符合MODIS业务化反演AOD的精度要求。再将反演得到的气溶胶带入6S辐射传输模型中,对HJ-1卫星CCD数据进行大气校正实验。结果表明,该方法能有效提高HJ-1卫星CCD数据大气校正的精度,更好地复原地物的真实光谱信息。