OIPC和RCWIP降水氢氧稳定同位素数据在新疆天山地区的适用性

降水中氢氧稳定同位素的空间分布是同位素水文学和同位素生态学研究的基础资料, 近年来高空间分辨率的氢氧稳定同位素分布数据产品获得了越来越多的重视。利用新疆天山地区实测降水同位素数据, 评估两套常用的全球降水同位素分布模拟数据（OIPC和RCWIP）的适用性。结果表明： 从时间尺度来看, 两套产品在夏半年（4 - 10月）的模拟效果明显优于冬半年（11月 - 次年3月）; 在各自然区中, 准噶尔盆地荒漠自然区的模拟效果相对较好, 而吐鲁番盆地-哈密（戈壁）荒漠自然区模拟效果相对较差。通过均方根误差、 线性判定系数、 平均偏置误差、 平均绝对误差等指标的比较, 在本研究区内RCWIP数据产品对降水同位素值的模拟效果比OIPC的效果好。结合乌鲁木齐多年降水氢氧稳定同位素数据, 发现降水同位素年际变化差异并未明显影响到代表性, 在缺乏长期监测的情况下这两套数据仍有重要的使用价值。     

COMPARATIVE STUDY ON THE SEISMIC RETROFIT OF A MID-RISE STEEL BUILDING: STEEL BRACING VS ENERGY DISSIPATION

The paper presents a comparative study of an existing retrofit for a mid-rise steel building using additional stiff steel braced-frames against an alternate retrofit using ADAS (Added Damping and Stiffness) passive energy dissipation devices. The subject building, located near Alameda Park in downtown Mexico City, is a ten-storey office building that was built in the 1950s. The structure was damaged during the 1985 Michoacán Earthquake because of resonant response with the site. The building was later retrofitted using additional braced frames according to the seismic provisions of Mexico's 1987 Federal District Code. The retrofit scheme was planned to take the structure away from resonant responses and to inhibit structural damage. A proposed upgrade using ADAS energy dissipation devices was studied to compare energy dissipation against traditional stiffening using steel braces as retrofit options for mid-rise buildings in Mexico City's lake-bed zone. Different sets of analyses were carried out to compare both alternatives: (a) three-dimensional elastic analyses; (b) limit analyses and; (c) nonlinear dynamic analyses for postulated site ground motions for a M_s=8.1 earthquake. Initial costs of the retrofit schemes were also studied. The comparative studies suggest that a retrofit using ADAS devices would have a better dynamic performance than the one using steel braces. However, the steel bracing retrofit provides more strength and its initial cost of retrofit is less than that of the ADAS retrofit. © 1997 John Wiley & Sons, Ltd.     

四川米易海塔地区混合岩型铀矿流体包裹体特征

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。     

Approximate traveltime inversion in downhole microseismic monitoring

In downhole microseismic monitoring, accurate event location relies on the accuracy of the velocity model. The model can be estimated along with event locations. Anisotropic models are important to get accurate event locations. Taking anisotropy into account makes it possible to use additional data – two S-wave arrivals generated due to shear-wave splitting. However, anisotropic ray tracing requires iterative procedures for computing group velocities, which may become unstable around caustics. As a result, anisotropic kinematic inversion may become time consuming. In this paper, we explore the idea of using simplified ray tracing to locate events and estimate medium parameters. In the simplified ray-tracing algorithm, the group velocity is assumed to be equal to phase velocity in both magnitude and direction. This assumption makes the ray-tracing algorithm five times faster compared to ray tracing based on exact equations. We present a set of tests showing that given perforation-shot data, one can use inversion based on simplified ray-tracing even for moderate-to-strong anisotropic models. When there are no perforation shots, event-location errors may become too large for moderately anisotropic media.     

痕量氢观测环境及供电系统建设

应用ATG-6118H痕量氢在线自动分析仪在水井类观测点观测过程中发现,外界观测环境的变化对于痕量氢浓度的观测存在一定干扰。文章依据宁河痕量氢观测井的观测环境及供电系统的改造过程,对2017年11月11日井房改造完成前后的痕量氢浓度数据进行分析论述,为该仪器的后续观测提供一些借鉴经验。     

Effects of supplemental viscous damping on seismic response of asymmetric-plan systems

Coupling between lateral and torsional motions may lead to much larger edge deformations in asymmetric-plan systems compared to systems with a symmetric plan. Supplemental viscous damping has been found to be effective in reducing deformations in the symmetric-plan system. This investigation examined how supplemental damping affects the edge deformations in asymmetric-plan systems. First, the parameters that characterize supplemental viscous damping and its plan-wise distribution were identified, and then the effects of these parameters on edge deformations were investigated. It was found that supplemental damping reduces edge deformations and that reductions by a factor of up three are feasible with proper selection of system parameters. Furthermore, viscous damping may be used to reduce edge deformations in asymmetric-plan systems to levels equal to or smaller than those in the corresponding symmetric-plan system. © 1998 John Wiley & Sons, Ltd.     

主动与被动状态下墙体侧向位移近似计算

极限状态下墙体侧向位移对土压力计算和支挡结构设计影响显著。根据Rankine变形体和Coulomb刚塑体模型,将墙后土体变形分别当作单剪和直剪试验中试样的剪切过程,以达到极限剪切变形（剪应变或单位长度剪切位移）作为进入主被动状态标准,构建了土体变形与墙体位移的几何关系,提出了反映土体变形与强度特性,同时考虑静止时初始应力状态影响的墙体极限侧向位移近似计算模型。分析表明：土体极限剪切变形、滑移区范围、初始应力状态是影响墙体极限位移的核心要素,其中极限剪切变形占据主导作用,是导致不同颗粒组成及密实程度土体进入极限状态所需墙体位移差异显著的主要原因,而主被动区范围不同和因静止土压力系数 1引起的初始剪切变形,则是被动状态墙体位移远大于主动的关键因素;算例中主动与被动状态下墙体位移与墙高之比分别介于0.5‰～13.2‰和?0.4%～?5.2%,且主动状态下细粒土墙体位移大于粗粒土,计算结果与工程经验及相关文献模型试验基本一致。     

刚性挡土墙后三维被动滑裂面的模型试验

针对无黏性土体,采用模型试验的方法,研究平移模式下刚性挡土墙后被动破坏滑裂面的空间形态。自主设计一种模型试验装置,重复开展6次试验,通过记录挡土墙后土体中预埋脆性玻璃条断裂的空间坐标,复原土体发生滑动的位置,绘制出挡土墙后滑裂面的三维形态图。试验结果表明：挡土墙后滑裂面具有明显的三维效应;挡土墙宽度内滑裂面纵向高度呈先缓慢增高后近似直线增高的曲面,初始破裂角度为9°,平均破裂角为26°,朗肯土压力理论的破裂角为28°;最大纵向破裂面长度为1.8倍挡土墙高度,与经典土压力理论的平面假定基本一致;滑裂面均有一定的横向扩展,主平面投影以初始扩散角约45°的斜线往外扩展,距离挡土墙最远处是宽度为0.7倍挡土墙宽度的水平线,斜线与水平线之间以半径为挡土墙宽度的圆弧过渡连接。研究结果为分析土体被动破坏的滑裂面空间形态提供了试验依据。     

Fluid Inclusions and Hydrogen,Oxygen, and Lead Isotopes of the Antuoling Molybdenum Deposit,Northern Taihang Mountains,China

The Antuoling Mo deposit is a major porphyry‐type deposit in the polymetallic metallogenic belt of the northern Taihang Mountains, China. The processes of mineralization in this deposit can be divided into three stages: an early quartz–pyrite stage, a middle quartz–polymetallic sulfide stage, and a late quartz–carbonate stage. Four types of primary fluid inclusions are found in the deposit: two‐phase aqueous inclusions, daughter‐mineral‐bearing multiphase inclusions, CO₂–H₂O inclusions, and pure CO₂ inclusions. From the early to the late ore‐forming stages, the homogenization temperatures of the fluid inclusions are 300 to >500°C, 270–425°C, and 195–330°C, respectively, with salinities of up to 50.2 wt%, 5.3–47.3 wt%, and 2.2–10.4 wt% NaCl equivalent, revealing that the ore‐forming fluids changed from high temperature and high salinity to lower temperature and lower salinity. Moreover, based on the laser Raman spectra, the compositions of the fluid inclusions evolved from the NaCl–CO₂–H₂O to the NaCl–H₂O system. The δ¹⁸O_H2O and δD values of quartz in the deposit range from +3.9‰ to +7.0‰ and ?117.5‰ to ?134.2‰, respectively, reflecting the δD of local meteoric water after oxygen isotopic exchange with host rocks. The Pb isotope values of the sulfides (²⁰⁸Pb/²⁰⁴Pb, 36.320–37.428; ²⁰⁷Pb/²⁰⁴Pb, 15.210–15.495; ²⁰⁶Pb/²⁰⁴Pb, 16.366–17.822) indicate that the ore‐forming materials originated from a mixed upper mantle–lower crust source.     

Burying receivers for improved time‐lapse seismic repeatability: CO2CRC Otway field experiment

4D seismic is widely used to remotely monitor fluid movement in subsurface reservoirs. This technique is especially effective offshore where high survey repeatability can be achieved. It comes as no surprise that the first 4D seismic that successfully monitored the CO₂ sequestration process was recorded offshore in the Sleipner field, North Sea. In the case of land projects, poor repeatability of the land seismic data due to low S/N ratio often obscures the time‐lapse seismic signal. Hence for a successful on shore monitoring program improving seismic repeatability is essential. Stage 2 of the CO2CRC Otway project involves an injection of a small amount (around 15,000 tonnes) of CO₂/CH₄ gas mixture into a saline aquifer at a depth of approximately 1.5 km. Previous studies at this site showed that seismic repeatability is relatively low due to variations in weather conditions, near surface geology and farming activities. In order to improve time‐lapse seismic monitoring capabilities, a permanent receiver array can be utilised to improve signal to noise ratio and hence repeatability. A small‐scale trial of such an array was conducted at the Otway site in June 2012. A set of 25 geophones was installed in 3 m deep boreholes in parallel to the same number of surface geophones. In addition, four geophones were placed into boreholes of 1–12 m depth. In order to assess the gain in the signal‐to‐noise ratio and repeatability, both active and passive seismic surveys were carried out. The surveys were conducted in relatively poor weather conditions, with rain, strong wind and thunderstorms. With such an amplified background noise level, we found that the noise level for buried geophones is on average 20 dB lower compared to the surface geophones. The levels of repeatability for borehole geophones estimated around direct wave, reflected wave and ground roll are twice as high as for the surface geophones. Both borehole and surface geophones produce the best repeatability in the 30–90 Hz frequency range. The influence of burying depth on S/N ratio and repeatability shows that significant improvement in repeatability can be reached at a depth of 3 m. The level of repeatability remains relatively constant between 3 and 12 m depths.