Snow model sensitivity analysis to understand spatial and temporal snow dynamics in a high‐elevation catchment

In this paper, we addressed a sensitivity analysis of the snow module of the GEOtop2.0 model at point and catchment scale in a small high‐elevation catchment in the Eastern Italian Alps (catchment size: 61 km²). Simulated snow depth and snow water equivalent at the point scale were compared with measured data at four locations from 2009 to 2013. At the catchment scale, simulated snow‐covered area (SCA) was compared with binary snow cover maps derived from moderate‐resolution imaging spectroradiometer (MODIS) and Landsat satellite imagery. Sensitivity analyses were used to assess the effect of different model parameterizations on model performance at both scales and the effect of different thresholds of simulated snow depth on the agreement with MODIS data. Our results at point scale indicated that modifying only the “snow correction factor” resulted in substantial improvements of the snow model and effectively compensated inaccurate winter precipitation by enhancing snow accumulation. SCA inaccuracies at catchment scale during accumulation and melt period were affected little by different snow depth thresholds when using calibrated winter precipitation from point scale. However, inaccuracies were strongly controlled by topographic characteristics and model parameterizations driving snow albedo (“snow ageing coefficient” and “extinction of snow albedo”) during accumulation and melt period. Although highest accuracies (overall accuracy = 1 in 86% of the catchment area) were observed during winter, lower accuracies (overall accuracy < 0.7) occurred during the early accumulation and melt period (in 29% and 23%, respectively), mostly present in areas with grassland and forest, slopes of 20–40°, areas exposed NW or areas with a topographic roughness index of ?0.25 to 0 m. These findings may give recommendations for defining more effective model parameterization strategies and guide future work, in which simulated and MODIS SCA may be combined to generate improved products for SCA monitoring in Alpine catchments.     

基于决策树分类的大屯矿区地物信息提取及矿区污染分析

本文在对国内外遥感图像分类方法充分研究分析的基础上,选择决策树分类法对大屯矿区的Landsat 8遥感图像进行分类研究。选取样本提取并分析研究区典型地类光谱特征曲线,依据光谱曲线特征和归一化植被指数建立了土地利用分类决策树模型,通过反复试验和修正,筛选出适宜大屯矿区地物分类的决策树最优阈值,对研究区进行分类和精度评价,最后通过分类结果对研究区的水体污染状况进行简要分析。     

单片卫星影像在航测测图中的利用

在边境测图过程中,经常遇到较大面积云层问题,使航测测图无法顺利进行。能充分利用的影像资源是第一次全国地理国情普查的影像,有国产高分2号、SPOT-6、资源3号等单片卫星影像,无立体像对影像。通过对国情普查的影像分析选取,选取一试验区域进行试验,用国产高分2号卫星影像与SPOT-6卫星影像组成立体像对测制地物地貌,用Worldview卫星立体像对影像测制同一区域的地物地貌,将两种影像源组成立体模型测制的地物地貌进行比较及精度统计,说明单片卫星影像在航测测图中达到的精度。     

灰色组合模型在滑坡变形监测中的应用分析

在GM(1,1)模型的基础上,主要研究了改进残差修正模型、灰色BP神经网络模型、灰色线性回归模型在变形数据的预计精度,并且结合实例分析了不同灰色组合模型在滑坡变形预计的精度以及优缺点。     

High-order compact MacCormack scheme for two-dimensional compressible and non-hydrostatic equations of the atmosphere

This study is devoted to application of the fourth-order compact MacCormack scheme to spatial differencing of the conservative form of two-dimensional and non-hydrostatic equation of a dry atmosphere. To advance the solution in time a four-stage Runge–Kutta method is used. To perform the simulations, two test cases including evolution of a warm bubble and a cold bubble in a neutral atmosphere with open and rigid boundaries are employed. In addition, the second-order MacCormack and the standard fourth-order compact MacCormack schemes are used to perform the simulations. Qualitative and quantitative assessment of the numerical results for different test cases exhibit the superiority of the fourth-order compact MacCormack scheme on the second-order method.     

北斗卫星导航系统双差动力法精密定轨及其精度分析

针对GEO卫星切向轨道分量与双差模糊度强相关的问题,对经典双差动力法进行了改进,提出联合使用载波相位和相位平滑伪距实现北斗系统精密定轨,并从理论上分析了以上处理策略的可行性及对模糊度固定的影响,然后结合北斗系统精密定轨特点,推导给出了利用QIF方法实现北斗卫星双差模糊度固定的基本原理,实测数据分析表明:联合载波相位和相位平滑伪距,既可降低相关性,又可兼顾精度,定轨效果优于经典双差动力法;利用QIF方法能够取得一定的模糊度固定效果,但受观测条件限制,北斗卫星双差模糊度固定成功率整体不高,双差模糊度固定之后对轨道的改进作用有限。     

利用引力梯度数据计算径向梯度的优化方法

根据重力梯度观测各分量的方差及协方差信息,提出了利用GOCE梯度数据计算径向重力梯度的优化方法。首先给出了径向重力梯度的计算方法,并深入分析了误差传播规律,通过建立相应的条件极值问题,给出了计算径向重力梯度最优组合因子的方法;通过模拟数据验证了本文所提出的优化因子的优越性。实际数据计算表明:相对于传统方法,采用优化组合因子可使反演所得引力位模型的累积大地水准面精度在250阶时提高约2 cm。由于径向重力梯度不仅可以用于地球引力场模型的求解,也可直接应用于地球物理问题的讨论,因此本文所提出的优化方法也可对部分地球动力学问题的讨论提供方便。     

以SRTM-DEM为控制的光学卫星遥感立体影像正射纠正

针对全球测图缺少统一的控制基准的问题,提出了利用SRTM-DEM作为控制基准,对光学卫星遥感影像进行正射纠正的方法。首先,对光学卫星影像构建的立体影像对进行自由网平差并制作DEM;然后,以SRTM-DEM作为控制,将DEM作为单元模型,进行独立模型法DEM区域网平差,获得单元模型的定向参数;最后,改正立体影像的成像几何模型参数,进行正射纠正。选取湖北咸宁和江西某地两个测区的资源三号数据进行试验,试验结果表明,资源三号正视全色影像的平面定向精度由12.93像素提高到6.85像素。     

基于有理多项式模型的GF4卫星区域影像平差处理方法及精度验证

分析了我国首颗静止轨道光学遥感卫星高分四号(GF4)特有的区域成像模式的几何特性,基于静止轨道成像基高比较小的几何特性提出一种利用平均高程面的区域网平差方法。该方法针对GF4卫星影像构建了基于有理多项式模型RFM的区域网平差模型,并在无控制条件下,对GF4卫星区域影像进行区域网平差处理,解决了GF4号区域影像由于定轨误差、定姿误差、大气折光以及镜头畸变等因素导致的拼接精度较低的问题。最后,通过两组真实数据试验对本文方法的精度及有效性进行了验证,同时分析了采用不同的误差补偿模型对于平差结果精度的影响。     

基于规则格网的DEM插值实验

通过地形建模,将6个地形隶属函数按照101×101,112×112,126×126,144×144,168×168,201×201,257×257 7种格网密度生成6种局部地形单元的规则格网DEM;使用反距离加权(IDW)等7种插值算法,将前6种格网密度下的DEM插值成257×257规格;从原始257×257DEM中随机抽取检查点计算残差,并对残差中误差进行分析。通过分组插值实验,运用控制变量法、方差分析等方法研究地貌类型、采样密度和插值算法对DEM插值精度的影响。