基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Comparative response analysis of conventional and innovative seismic protection strategies

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

全谱直读等离子发射光谱法直接测定天然矿泉水中的SO2-4

采用全谱直读等离子发射光谱(ICP-AES)直接测定天然矿泉水中SO2-4的方法在优化工作条件下SO42-的测定下限为0.09mgL-1,方法简便,快速,适用于批量生产.     

利用ERS-2 SAR图像纹理分析方法揭示长白山天池火山近代喷发物空间分布特征

简单介绍了SAR图像的纹理特征以及正交小波变换纹理提取方法。论述了SAR图像的纹理特征参与分类的重要性。以长白山天池火山为例,通过对ERS2SAR图像进行纹理分析,提取了SAR图像两个层次的尺度变化、时频局部化和方向性纹理特征。并将SAR纹理特征与TM图像及DEM进行复合,利用多源信息各自的优势,进行了BP神经元网络分类,从较大范围对长白山天池火山735±15aB.P.大喷发的喷发物空间分布进行评价。获取了长白山天池火山近代喷发物的空间分布及规模。这对长白山天池火山未来喷发危险性初步评价、火山地质制图及火山灾害预测有重要意义。     

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。     

滇西北地区富碱岩体(脉)地质学及岩石化学特征

喜山期富碱岩体广布于滇西北地区 ,通过对其地质学和岩石化学特征的研究 ,认为富碱岩体 (脉 )由正长 (斑 )岩、二长斑岩、花岗斑岩及相关的火山岩组成 ,具有多次活动的特征 ,并形成区内富有特色的岩浆岩系列 ;该系列岩浆岩以富碱高钾为突出特点 ,具有正常的岩浆演化趋势 ,不同岩带岩石地质学和岩石化学方面有区域性变化规律。     

中国科学院固体地球科学知识创新工程现状与发展态势

回顾了中国科学院国家知识创新试点工程实施以来特别是启动阶段3年里固体地球科学知识创新工程试点各项工作的进展情况，包括项目与经费、创新成果、人才吸引、科研竞争力提升、院地合作推进等方面，分析和总结了中国科学院固体地球科学知识创新工程现状，并展望了固体地球科学知识创新工程若干重要发展态势。     

A multi-scale study on land use and land cover quality change: The case of the Yellow River Delta in China

This paper presents a case study of the Yellow River Delta in China, to trace land use and land cover changes during the past 20 years, with an emphasis on land quality changes. Three sets of data are used in this case study: remote sensing data derived from satellite images; crop yield data from statistics; and soil data collected by the researchers in the field. Our study reveals that at the regional scale, LUCC has taken place in a positive direction: vegetation cover has been expanding and crop yields per hectare have been on rise. However, while the overall eco-environment has improved, the improvement is uneven across the Delta region. At local levels, some areas show signs of increased salinization and declining organic content. Both natural forces and human activities are responsible for the LUCC, but human activities play a more important role. While some impacts of human activities are positive, the damages are often long-lasting and irreversible. We also conclude that it is necessary to use both macro data (such as remote sensing data) and micro data (data collected in the field) to study land quality change. The former are efficient in examining land quality changes at the regional scale, the latter can serve to verify ground patterns revealed from macro data and help to identify local variations, so as to get a comprehensive understanding of LUCC and promote sustainable land use and land management. This revised version was published online in July 2006 with corrections to the Cover Date.