Groundwater recharge sources in semiarid irrigated mountain fronts

High-elevation mountains often constitute for basins important groundwater recharge sources through mountain-front recharge processes. These processes include streamflow losses and subsurface inflow from the mountain block. However, another key recharge process is from irrigation practices, where mountain streamflow is distributed across the irrigated piedmont. In this study, coupled groundwater fluctuation measurements and environmental tracers (¹⁸O, ²H, and major ions) were used to identify and compare the natural mountain-front recharge to the anthropogenically induced irrigation recharge. Within the High Atlas mountain front of the Ourika Basin, Central Morocco, the groundwater fluctuation mapping from the dry to wet season showed that recharge beneath the irrigated area was higher than the recharge along the streambed. Irrigation practices in the region divert more than 65% of the stream water, thereby reducing the potential for in-stream groundwater recharge. In addition, the irrigation areas close to the mountain front had greater water table increases (up to 3.5 m) compared with the downstream irrigation areas (<1 m increase). Upstream crops have priority to irrigation with stream water over downstream areas. The latter are only irrigated via stream water during large flood events and are otherwise supplemented by groundwater resources. These changes in water resources used for irrigation practices between upstream and downstream areas are reflected in the spatiotemporal evolution of the stable isotopes of groundwater. In the upstream irrigation area, the groundwater stable isotope values (δ¹⁸O: −8.4‰ to −7.4‰) reflect recharge by the diverted stream water. In the downstream irrigation area, the groundwater isotope values are lower (δ¹⁸O: −8.1‰ to −8.4‰) due to recharge via the flood water. In the nonirrigation area, the groundwater has the highest stable isotope values (δ¹⁸O: −6.8‰ to −4.8‰). This might be due to recharge via subsurface inflow from the mountain block to the mountain front and/or recharge via local low altitude rainfall. These findings highlight that irrigation practices can result in the dominant mountain-front recharge process for groundwater.     

Modelling spatial variations in dissolved oxygen in fine‐grained streams under uncertainty

This paper presents a novel triple‐layer model, called VART DO‐3L, for simulation of spatial variations in dissolved oxygen (DO) in fine‐grained streams, characterized by a fluid mud (fluff or flocculent) layer (an advection‐dominated storage zone) as the interface between overlying stream water and relatively consolidated streambed sediment (a diffusion‐dominated storage zone). A global sensitivity analysis is conducted to investigate the sensitivity of VART DO‐3L model input parameters. Results of the sensitivity analysis indicate that the most sensitive parameter is the relative size of the advection‐dominated storage zones (A_s/A), followed by a lumped reaction term (R) for the flocculent layer, biological reaction rate (μ_o) in diffusive layer and biochemical oxygen demand concentration (L) in water column. In order to address uncertainty in model input parameters, Monte Carlo simulations are performed to sample parameter values and to produce various parameter combinations or cases. The VART DO‐3L model is applied to the Lower Amite River in Louisiana, USA, to simulate vertical and longitudinal variations in DO under the cases. In terms of longitudinal variation, the DO level decreases from 7.9 mg l at the Denham Springs station to about 2.89 mg l^?1 at the Port Vincent station. In terms of vertical variation, the DO level drops rapidly from the overlying water column to the advection‐dominated storage zone and further to the diffusive layer. The DO level (C_F) in the advective layer (flocculent layer) can reach as high as 40% of DO concentration (C) in the water column. The VART DO‐3L model may be applied to similar rivers for simulation of spatial variations in DO level. Copyright © 2014 John Wiley & Sons, Ltd.     

A new approach to estimate canopy evaporation and canopy interception capacity from evapotranspiration and sap flow measurements during and following wetting

Canopy interception and its evaporation into the atmosphere during irrigation or a rainfall event are important in irrigation scheduling, but are challenging to estimate using conventional methods. This study introduces a new approach to estimate the canopy interception from measurements of actual total evapotranspiration (ET) using eddy covariance and estimation of the transpiration from measurements of sap flow. The measurements were conducted over a small‐scale sprinkler‐irrigated cotton field before, during and after sprinkler irrigation. Evaporation and sap flow dynamics during irrigation show that the total ET during irrigation increased significantly because of the evaporation of free intercepted water while transpiration was suppressed almost completely. The difference between actual ET and transpiration (sap flow) during and immediately following irrigation (post irrigation) represents the total canopy evaporation while the canopy interception capacity was calculated as the difference between actual ET and transpiration (sap flow) during drying (post irrigation) following cessation of the irrigation. The canopy evaporation of cotton canopy was calculated as 0.8 mm, and the interception capacity was estimated to be 0.31 mm of water. The measurement uncertainty in both the non‐dimensional ET and non‐dimensional sap flow was shown to be very low. Copyright © 2015 John Wiley & Sons, Ltd.     

On the relationship between historical land‐use change and water availability: the case of the lower Tarim River region in northwestern China

Natural ecosystems in the region of the lower Tarim River in northwestern China strongly deteriorated since the 1950s due to an expanding desertification. As a result, the downstream Tarim River reaches became permanently dry land. This historical evolution in land‐use change is typically the result of the anthropogenic impact on natural ecosystems. On the basis of a spatially distributed hydrological catchment model bidirectionally linked with a fully hydrodynamic MIKE11 river model, land‐use changes characterized by historical changes in leaf area index (LAI) of vegetation, as well as the evolution of irrigated surface areas, can be causally related to changes in water resources (groundwater storage and surface water resources). An increased surface area of irrigated (agricultural) land, together with a majority of inefficient irrigation methods, did lead to a strong increase of water resources consumption of the farmlands located in the upper Tarim River area. Evidently, this evolution influenced available water resources downstream in the Tarim basin. As a result, farmland has been gradually relocated to the upstream regions. This has led to reduced flows from the upper Tarim stream, which subsequently accelerated the dropping of the groundwater level downstream in the basin. This study moreover demonstrates that land surface biomass changes (cumulative LAI) along the lower Tarim River are strongly related to the changes in groundwater storage. Copyright © 2012 John Wiley & Sons, Ltd.     

Meeting future food demand with current agricultural resources

Meeting the food needs of the growing and increasingly affluent human population with the planet’s limited resources is a major challenge of our time. Seen as the preferred approach to global food security issues, ‘sustainable intensification’ is the enhancement of crop yields while minimizing environmental impacts and preserving the ability of future generations to use the land. It is still unclear to what extent sustainable intensification would allow humanity to meet its demand for food commodities. Here we use the footprints for water, nitrogen, carbon and land to quantitatively evaluate resource demands and greenhouse gas (GHG) emissions of future agriculture and investigate whether an increase in these environmental burdens of food production can be avoided under a variety of dietary scenarios. We calculate average footprints of the current diet and find that animal products account for 43–87% of an individual’s environmental burden – compared to 18% of caloric intake and 39% of protein intake. Interestingly, we find that projected improvements in production efficiency would be insufficient to meet future food demand without also increasing the total environmental burden of food production. Transitioning to less impactful diets would in many cases allow production efficiency to keep pace with growth in human demand while minimizing the food system’s environmental burden. This study provides a useful approach for evaluating the attainability of sustainable targets and for better integrating food security and environmental impacts.     

Estimation of transit trip production using Factorial Kriging with External Drift: an aggregated data case study

Studies in transportation planning routinely use data in which location attributes are an important source of information. Thus, using spatial attributes in urban travel forecasting models seems reasonable. The main objective of this paper is to estimate transit trip production using Factorial Kriging with External Drift (FKED) through an aggregated data case study of Traffic Analysis Zones in São Paulo city, Brazil. The method consists of a sequential application of Principal Components Analysis (PCA) and Kriging with External Drift (KED). The traditional Linear Regression (LR) model was adopted with the aim of validating the proposed method. The results show that PCA summarizes and combines 23 socioeconomic variables using 4 components. The first component is introduced in KED, as secondary information, to estimate transit trip production by public transport in geographic coordinates where there is no prior knowledge of the values. Cross-validation for the FKED model presented high values of the correlation coefficient between estimated and observed values. Moreover, low error values were observed. The accuracy of the LR model was similar to FKED. However, the proposed method is able to map the transit trip production in several geographical coordinates of non-sampled values.     

甘肃永靖黑方台4·29罗家坡黄土滑坡的特征

2015年4月29日上午,甘肃省永靖县盐锅峡镇黑方台滑坡高频发区的党川村罗家坡同一斜坡处连续发生了2次大规模黄土滑坡,总体积约65×10~4m~3,最大滑距630 m,摧毁14户居民房屋和3家工厂.通过现场详细调查、取样试验、1∶500地形测量、滑坡影像、视频等资料分析,对灌溉引发的罗家坡黄土滑坡的特征、滑动过程、形成机理进行了探讨.结果表明:第1次滑坡经过近2 a变形过程,整体突然失稳,高速远程滑动;第2次滑坡变形时间仅3 h,分块逐步滑动,滑动历时长而过程复杂,总体为低速远程滑动.高陡的地形和强度低、水敏感性强的土体是滑坡发生的基础,黄土台塬区长期农业灌溉是引发因素,大量水体入渗形成了20余米厚的饱和软弱基座,使抗剪强度降低,导致斜坡失稳滑动.黄土滑坡高速远程滑动的主要原因是滑坡剪出口位置高,滑动势能大,释放条件好,剪出口下部陡坡段为主要加速段;前方有开阔的滑动空间且有一定坡度、平缓的滑道;滑体底部饱和软弱黏性土在滑道上持续产生超孔隙水压力、液化等低摩阻效应,是远程滑动的润滑剂.同时,两次滑体间还存在冲击加速和能量传递作用.     

Development and Utilization of the World’s and China’s Bulk Mineral Resources and their Supply and Demand Situation in the Next Twenty Years

Bulk mineral resources of iron ores, copper ores, bauxite, lead ores, zinc ores and potassium salt play a pivotal role on the world’s and China’s economic development. This study analyzed and predicted their resources base and potential, development and utilization and their world’s and China’s supply and demand situation in the future 20 years. The supply and demand of these six bulk mineral products are generally balanced, with a slight surplus, which will guarantee the stability of the international mineral commodity market supply. The six mineral resources(especially iron ores and copper ores) are abundant and have a great potential, and their development and utilization scale will gradually increase. Till the end of 2014, the reserveproduction ratio of iron, copper, bauxite, lead, zinc ores and potassium salt was 95 years, 42 years, 100 years, 17 years, 37 years and 170 years, respectively. Except lead ores, the other five types all have reserve-production ratio exceeding 20 years, indicative of a high resources guarantee degree. If the utilization of recycled metals is counted in, the supply of the world’s six mineral products will exceed the demand in the future twenty years. In 2015–2035, the supply of iron ores, refined copper, primary aluminum, refined lead, zinc and potassium salt will exceed their demand by 0.4–0.7 billion tons(Gt), 5.0–6.0 million tons(Mt), 1.1–8.9 Mt, 1.0–2.0 Mt, 1.2–2.0 Mt and 4.8–5.6 Mt, respectively. It is predicted that there is no problem with the supply side of bulk mineral products such as iron ores, but local or structural shortage may occur because of geopolitics, monopoly control, resources nationalism and trade friction. Affected by China’s compressed industrialized development model, the demand of iron ores(crude steel), potassium salt, refined lead, refined copper, bauxite(primary aluminum) and zinc will gradually reach their peak in advance. The demand peak of iron ores(crude steel) will reach around 2015, 2016 for potassium salt, 2020 for refined lead, 2021 for bauxite(primary aluminum), 2022 for refined copper and 2023 for zinc. China’s demand for iron ores(crude steel), bauxite(primary aluminum) and zinc in the future 20 years will decline among the world’s demand, while that for refined copper, refined lead and potassium salt will slightly increase. The demand for bulk mineral products still remains high. In 2015–2035, China’s accumulative demand for iron ores(crude steel) will be 20.313 Gt(13.429 Gt), 0.304 Gt for refined copper, 2.466 Gt(0.616 Gt) of bauxite(primary aluminum), 0.102 Gt of refined lead, 0.138 Gt of zinc and 0.157 Gt of potassium salt, and they account for the world’s YOY(YOY) accumulative demand of 35.17%, 51.09%, 48.47%, 46.62%, 43.95% and 21.84%, respectively. This proportion is 49.40%, 102.52%, 87.44%, 105.65%, 93.62% and 106.49% of that in 2014, respectively. From the supply side of China’s bulk mineral resources, it is forecasted that the accumulative supply of primary(mine) mineral products in 2015–2035 is 4.046 Gt of iron ores, 0.591 Gt of copper,1.129 Gt of bauxite, 63.661 Mt of(mine) lead, 0.109 Gt of(mine) zinc and 0.128 Gt of potassium salt, which accounts for 8.82%, 13.92%, 26.67%, 47.09%, 33.04% and 15.56% of the world’s predicted YOY production, respectively. With the rapid increase in the smelting capacity of iron and steel and alumina, the rate of capacity utilization for crude steel, refined copper, alumina, primary aluminum and refined lead in 2014 was 72.13%, 83.63%, 74.45%, 70.76% and 72.22%, respectively. During 2000–2014, the rate of capacity utilization for China’s crude steel and refined copper showed a generally fluctuating decrease, which leads to an insufficient supply of primary mineral products. It is forecasted that the supply insufficiency of iron ores in 2015–2035 is 17.44 Gt, 0.245 Gt of copper in copper concentrates, 1.337 Gt of bauxite, 38.44 Mt of lead in lead concentrates and 29.19 Mt of zinc in zinc concentrates. China has gradually raised the utilization of recycled metals, which has mitigated the insufficient supply of primary metal products to some extent. It is forecasted that in 2015–2035 the accumulative utilization amount of steel scrap(iron ores) is 3.27 Gt(5.08 Gt), 70.312 Mt of recycled copper, 0.2 Gt of recycled aluminum, 48 Mt of recycled lead and 7.7 Mt of recycled zinc. The analysis on the supply and demand situation of China’s bulk mineral resources in 2015–2035 suggests that the supply-demand contradiction for these six types of mineral products will decrease, indicative of a generally declining external dependency. If the use of recycled metal amount is counted in, the external dependency of China’s iron, copper, bauxite, lead, zinc and potassium salt will be 79%, 65%, 26%, 8%, 16% and 18% in 2014, respectively. It is predicted that this external dependency will decrease to 62%, 64%, 20%,-0.93%, 16% and 14% in 2020, respectively, showing an overall decreasing trend. We propose the following suggestions correspondingly.(1) The demand peak of China’s crude steel and potassium salt will reach during 2015–2023 in succession. Mining transformation should be planned and deployed in advance to deal with the arrival of this demand peak.(2) The supply-demand contradiction of China’s bulk mineral resources will mitigate in the future 20 years, and the external dependency will decrease accordingly. It is suggested to adjust the mineral resources management policies according to different minerals and regions, and regulate the exploration and development activities.(3) China should further establish and improve the forced mechanism of resolving the smelting overcapacity of steel, refined copper, primary aluminum, lead and zinc to really achieve the goal of "reducing excess production capacity".(4) In accordance with the national strategic deployment of "One Belt One Road", China should encourage the excess capacity of steel, copper, alumina and primary aluminum enterprises to transfer to those countries or areas with abundant resources, high energy matching degree and relatively excellent infrastructure. Based on the national conditions, mining condition and geopolitics of the resources countries, we will gradually build steel, copper, aluminum and lead-zinc smelting bases, and potash processing and production bases, which will promote the excess capacity to transfer to the overseas orderly.(5) It is proposed to strengthen the planning and management of renewable resources recycling and to construct industrial base of renewable metal recycling.(6) China should promote the comprehensive development and utilization of paragenetic and associated mineral species to further improve the comprehensive utilization of bulk mineral resources.     

Analysis of interaction between ship bottom air cavity and boundary layer

The successful designs of hulls for ships employing drag reduction by air bottom cavitation have been based on solutions of inverse problems of the theory of ideal incompressible fluid. However, prediction of the drag reduction ratio, the air demand by ventilated cavities and the cavity impact on the hull–propeller interaction is impossible in the framework of this theory because all mentioned characteristics depend on interaction of air cavities with the ship boundary layers. Because the known CFD tools are not fitted to ventilated cavitation at low Froude numbers, an analysis of this interaction requires a novel flow model. This model includes the incompressible air flow in the ventilated cavity, the compressible flow of a water–air mixture in the boundary layer on cavities and downstream of them and the curl-free incompressible outer water flow. The provided 2D computations employing this model allows for explanations of the earlier observed effects and for prediction of the air demand by ventilated cavities. The computed velocity profiles downstream of cavities are in the accordance with the available experimental data.     

山西省2017年农田灌溉水有效利用系数测算分析研究

以山西省172个样点灌区为研究区域,按照《全国农田灌溉水有效利用系数测算分析技术指导细则》测算方法及要求,测算样点灌区农田灌溉水有效利用系数,在此基础上,以全省灌区统计资料为权重,测算分析得出山西省2017年大、中、小和纯井灌区农田灌溉水利用系数分别为0.484 6、0.501 0、0.475 8和0.639 8,全省系数为0.538。通过对测算成果分析,认为测算结果真实反映了当年山西省灌区农田灌溉用水效率,相关成果对山西省灌区工程建设、用水管理和规划编制等有一定指导意义。