Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

Long-range underwater photography in the deep ocean

Although the optical properties of seawater at extreme depths are more suitable for underwater photography than those at the surface or on continental shelves, they still impose severe limitations on long-range wide area bottom photography. Additionally, deep ocean operations impose technical limitations on control, power and bandwidth. This chapter reviews the approaches contemplated or made towards improving the camerato-target range in underwater photography in the deep ocean. Further significant improvements await advances in control, power/light sources and bandwidth reduction. With the developments now contemplated, TV and video systems will eventually present a strong challenge to emulsion film techniques.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

造山带异源浆混花岗岩理论与方法研究

1：5万花岗岩填图方法在区调工作中推广以来,在造山带花岗岩调查实践中,由于造山作用及过程的复杂性,花岗岩浆的多源及多样性,使同源岩浆演化理论及方法遇到了难题。文章在新一轮1：25万造山带试点图幅,在对同源岩浆演化理论及方法的适用性进行探索的同时,提出了异源浆混理论指导造山带内部浆混花岗岩（H型花岗岩）的填图方法。并就异源浆混花岗岩鉴别标志等作了系统总结,提出了浆混组合、浆混单元、浆混体,填图的理论方法体系;给予了浆混花岗岩明确的定义。     

粤东成矿地质背景及银-铜-铅-锌成矿物质来源探讨

通过对粤东地区地层和岩石中成矿元素含量和区域地质背景的分析,认为粤东地区铜铅-锌-银成矿作用与燕山期的构造-岩浆作用关系密切,成矿物质中银-铜-锌以下地壳来源为主,铅则以上地壳及沉积地层来源为主。     

Column Amounts of ClONO2, HCl, HNO3, and HF from Ground-Based FTIR Measurements Made Near Kiruna, Sweden, in Late Winter 1994

During SESAME phase I ground-based FTIR measurements were performed atEsrange near Kiruna, Sweden, from 28 January to 26 March 1994. Zenith columnamounts of ClONO₂, HCl, HF, HNO₃,O₃, N₂O, CH₄, and CFC-12 werederived from solar absorption spectra. Time series of ClONO₂and HCl indicate a chlorine activation at the end of January and around 1March. On 1 March a very low amount of HCl of 2.09times; 10¹⁵molec. cm^-2 was detected, probably caused by a second chlorineactivation phase starting from an already decreased amount of HCl. The ratioof column amounts of HCl to ClONO₂ decreased inside the vortexfrom about 1 in January to 0.4 in late March compared to values of about 2outside the vortex. Although the Arctic stratosphere was rather warm in winter1993/94 and PSCs occurred seldom, chlorine partitioning into its reservoirspecies HCl and ClONO₂ changed during that winter andClONO₂ is the major chlorine reservoir at the end of thewinter as in cold winters like 1991/92 and 1994/95.     

腾格里沙漠东南缘降尘粒度特征和沉积速率

从多年降尘实测资料入手，分析了粉尘粒度特征、沉积速率和时变过程。提出了气象要素相关估测模型．确定０．２５ｍｍ为本区粉尘沉积粒径上限。周围沙漠是粉尘沉积细砂部分的尘源，粉砂和粘土部分沉积来自一个较大的时空范围，二者几乎各占降尘量的１／２。研究区年平均粉尘沉积速率４３５８ｋｇ／ｈｍ２，每年５月的季风转期具有年内最大沉积速率。     

航空短波红外分光谱遥感技术直接寻找油气藏的有效性及应用实例

采用航空短波红外分光谱遥感技术，在新疆准噶尔盆地和塔里木盆地某些油气区，进行直接寻找油气资源的试验研究后发现，油气区含油岩系，油气藏上方盖层土壤的光谱在２３００和２３５０ｎｍ波段具有双吸收特征。