Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.     

塔克拉玛干沙漠腹地风蚀起沙特征观测研究

利用塔克拉玛干沙漠腹地塔中气象站2009—2018年的地面观测资料,分析塔中地区的风蚀起沙特征,结果表明:(1)塔中地区临界起沙风速呈明显的季节变化特征,夏季>春季>秋季>冬季,临界起沙风速介于4.47～4.92 m/s;(2)春、夏季是风蚀事件的多发季节,春、夏季沙尘水平通量的平均值分别为2638.9、3298.9 ...     

直井段偏移对后期定向钻井作业的影响分析

在定向井、水平井钻井过程中,直井段井身质量的控制对后期定向造斜与轨迹控制的影响往往被忽视,国内对定向井、水平井直井段井身质量要求基本是以常规直井的标准为依据,没有重视到直井段位移、井斜和方位对定向施工的影响。对于定向井、水平井来说,直井段偏移不仅对后期轨迹控制、定向施工和完井作业带来危害,同时给油田后续开发中井位的部署带来不利影响,对于平台丛式井直井段偏移可能造成井眼相碰,因此,定向井、水平井直井段控制的好与坏,将会给定向井、水平井的钻（完）井带来很大影响。本文统计分析近年完成的定向井、水平井直井段偏移情况和影响,简述直井段偏移的形成原因,对直井段不同类型偏移造成的影响进行了分析并提出了应对方案。     

基于CGCS2000的平面坐标系的选取

本文研究了CGCS2000启用后选择城市平面坐标系的方法,提出了以大地高分布数据上投影变形符合限差的点数百分比最大为重要准则,用于选取城市平面坐标系的方法。并以N市为例,利用N市大地高分布数据进行验证,相比常规方法,该方法能更全面、客观地反映区域地形起伏等因素对长度变形产生的影响。     

定向羽状水平井在晋南沁水盆地煤层气开发应用中存在的问题

定向羽状水平井是指通过定向井、多分支水平井技术,由地面垂直向下钻至造斜点后以中、小曲率半径侧斜钻进目的煤层主水平井,再从主井两侧不同位置水平侧钻分支井,进而形成像羽毛状的多分支水平井。这一技术是一项复杂的系统工程,目前在中国煤层气领域还处在研究和试验阶段,尚未形成一系列成熟的工艺与技术。只有通过对国内现有的定向井、分支井、水平井钻井技术,井眼轨迹精确控制技术和煤储层保护技术进行整合,吸收国外的先进技术和管理经验,并进行实际工程研究和试验,将各种技术进行优化组合,逐步积累经验,不断地完善,最终才能形成一整套适合于中国煤层气地质特征的多分支羽状水平井技术。     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

深基坑土钉支护现场测试分析研究

土钉支护技术在我国深基坑开挖和支护中己得到了广泛的应用,但对其工作机理和计算方法的研究尚不完善。以一个基坑土钉支护工程为实例,对基坑水平位移、土钉拉力进行现场测试,得出了土钉水平位移和拉力的分布规律:(1)基坑最大位移发生在基坑顶部;(2)沿基坑深度范围受力最大的土钉在中部;(3)单根土钉最大拉力作用点在其长度的中部,沿基坑深度方向土钉最大拉力作用点的连线形成的曲线是潜在最危险滑动面的位置。     

既有基坑延深开挖稳定性评价与支护方案确定

以北京市某特殊基坑工程为背景,采用FLAC3D软件,选用Mohr-Coulomb准则,对基坑在现有支护方案条件下进行延深开挖,计算分析桩锚支护体系的变形、受力情况。结果表明,基坑在现有支护方案条件下进行延深开挖将导致护坡桩抗弯性能不足、支护结构水平位移过大、锚固体系失效等问题,要保证基坑延深开挖后的安全稳定,必须对护坡桩增设支点,增加支护力。根据设计变更要求及施工现场实际条件,对多种加固支护方案进行比选,最终选用对护坡桩增设锚索的方案进行延深基坑的预加固。采用数值方法模拟分析上述加固方案后的基坑延深开挖力学行为,预测基坑及支护结构的变形情况,并与现场监测数据进行对比分析。结果表明,基坑延深开挖预加固支护方案合理有效,表明该方法对于类似工程的设计优化及现场施工具有重要的参考意义。     

基于GPS的华北地区地壳水平形变特征研究

利用中国大陆构造环境监测网络2009、2011年2期的GPS数据资料,计算得到华北地区相对于稳定的欧亚板块的区域水平速度场。根据水平速度场,基于连续变形假说,采用三角形方法计算了区域应变场特征值,并用GMT绘制了其分布图像。结合地震地质资料对该区的地壳水平形变特征进行分析研究,得出了有意义的结论:(1)水平相对运动与应变率场分布显示,板块交界处的断裂带及其附近区域地壳运动差异显著,应变率量值较为突出;(2)山西断陷带的活动方式与地质结果具有差异性;(3)区内最大剪应变、面膨胀的高值区主要位于环渤海的京津唐地区、山西断陷带中南部及郯庐断裂带中南段。