硬致密泥岩钻进的新型复合片钻头的研究与应用

介绍了一种新型齿形的复合片钻头，在硬致密泥岩中钻进，与常规复合片钻头相比，具有很高的钻进效率和高的钻头寿命，解决了泥岩钻进效率低的难题。     

Characterization of cristobalite in ash and dome rock from the Soufriere Hills volcano, Montserrat： Implications for respiratory health hazards

A link between the inhalation of respirable silicas （SiO2） and respiratory diseases such as silicosis is widely recognized. Ash from dome collapse eruptions on Montserrat has been found to contain high levels （〉20%） of silicas in the form of cristobalite, tridymite, quartz and/or amorphous silica. The toxicity of these silica polymorphs varies widely. Cristobalite and quartz （tridymite less well established） are viewed as carcinogenic to humans whereas amorphous silica generally shows a reduced biological response. In assessing the potential health effects of volcanic ash particulates it is vital to determine the types and concentration of silicas as well as their size （respirable fraction）, shape and surface properties. The aim of this study is to develop methods to assess potentially toxic respirable airborne silicas in the dome collapse ash （applicable to a range of ash types） and to develop a model to predict the levels and types of respirable silicas from future eruptions. The model is being developed by comparing dome rock with related ash from a series of previous eruption events. Mineralogical assessment using conventional scanning X-ray diffraction （XRD） was hampered by difficulties in differentiating characteristic peaks for cristobalite and tridymite in complex multi-component ash samples （containing high levels of plagioclase）. These difficulties have been largely overcome using an Enraf-Nonius PDS120 diffractometer with curved （120 degrees 20） position sensitive detector （PSD）. The determination of size, shape and elemental characteristics of ash particulate and dome rock samples has been carried out using automated analytical scanning electron microscopy. The quantification of mineral proportions using PSD-XRD was highly successful with an accuracy of 1 to 2 wt%. However, the determination of phase proportions using automated analytical SEM was problematic due to scattering effects and the multiphase nature of many of the particles.     

In situ time resolved synchrotron powder diffraction study of thaumasite

Structural changes during dehydration and subsequent decomposition in thaumasite Ca₃Si(SO₄)(CO₃)(OH)₆·12 H₂O were studied by in situ synchrotron powder diffraction between 303 and 1,098 K. Evolution of the crystal structure was observed through 28 structure refinements, by full profile Rietveld analysis performed in the P6₃ space group, between 300 and 417 K, whereupon the thaumasite structure was observed to breakdown. Within this temperature range, the cell parameters of thaumasite increased as a function of temperature in a nearly linear fashion up to about 393 K, at which temperature, a slight slope change was observed. Above 400 K, the thermogravimetric analysis revealed that the dehydration process proceeded very rapidly while the refined occupancy of water molecules dropped below a critical level, leading to instability in the thaumasite structure. At a same time, a remarkable change in the unit cell parameters occurring at about 417 K indicated that the crystal structure of thaumasite collapsed on losing the crystallization water and it turned amorphous. This result indicated that the dehydration/decomposition of thaumasite was induced by the departure of the crystallization water. At about 950 K, anhydrite and cristobalite crystallized from the thaumasite glass.     

Alteration, evaluation and use of extremaduran granite residues

The necessity of eliminating debris from a granite quarry has awakened an interest in applications of by-products, called “marginal arids”, in different fields, like construction and foundations for roadways, restoration, material for the manufacture of artificial rocks, and artesian products etc. Conclusions obtained from the results of tests carried out by X-ray diffraction of granite quarry by-products in Extremadura, Spain, submitted to different treatments, are established. Test pieces from two quarries are analyzed and compared generally and specifically, for commercial use. Finally, conclusions relating to essays in test pieces and mineral dynamics of marginal arid granite are exposed.     

The effect of composition and cation ordering on the compressibility of columbites up to 7 GPa

The unit-cell parameters of two columbite samples along the (Fe,Mn)Nb₂O₆ solid solution were measured by means of high-pressure single-crystal X-ray diffraction up to pressures of 7 GPa. The compressional behaviour of these minerals was studied as a function of composition and degree of order. The P–V data of all the samples were fitted with a third-order Birch–Murnaghan equation of state. For the two samples with different compositions but identical degree of order the substitution of Mn for Fe causes a decrease of the bulk modulus K _T0, from 153(1) to 146(1) GPa, without any effect on the pressure first derivative K′. For the two samples with the same composition, cation ordering causes an increase of the bulk modulus from 149(1) to 153(1) GPa and of the pressure first derivative from 4.1(2) to 4.8(3). The compressional behaviour is anisotropic with a linear axial compressibility scheme β _b > β _c ≥ β _a for all samples, regardless of composition and degree of order. Such anisotropy increases sligthly with increasing Mn content.     

控制内蒙古二连盆地达尔其油田石油富集度的关键因素——不同油源原油的混合作用

在对3套烃源岩的质量和成熟度描述基础上,通过对原油物理性质、族组成和生物标志化合物参数的研究,在达尔其油田内划分出成熟度有明显差异的低熟油和成熟油。油源对比结果认为它们分别由都红木组一段低熟烃源岩和阿尔善组二段成熟烃源岩所生。推测成熟度参数介于低熟和成熟之间的原油为混源油。通过原油混合试验和油砂连续抽提试验证实了混源油的推测。通过油藏剖面中不同性质油层的分布特征研究,结合断层发育史与油气运移关系分析认为不同油源原油的混合是控制该油田石油富集度较高的关键因素。此外,还分析了控制混源的断层组合特征。     

微量相X射线衍射定量分析的一种简便方法

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。     

理学3080E3型X射线荧光光谱仪维修实例

介绍理学3080E3型X射线荧光光谱仪样品驱动单元及高压发生器部分的故障现象及维修实例。     

基于GIS的区域地质编图方法

本文以地理信息系统在小比例尺区域地质编图中的应用为基础,结合《亚洲中部及邻区系列地质图》的编制,详细阐述了应用ArcInfo、MapGis等GIS软件进行数字地质编图的方法.对地理空间数据和专业地质空间数据的编制做了详细介绍,其中包括各种要素制图综合、属性库制作、编码设计、现势资料的补充等.根据数据源的不同,制定了不同的技术路线和工作方法.将来自不同国家的数据源进行数据转换、投影变换和误差校正,转换为统一的数据格式和投影坐标系统.对基于GIS的区域地质编图方法及数据源做了具体分析.     

南水北调中线工程上第三系膨胀性硬粘土的工程地质特性研究

上第三系硬粘土在中国东部新生代沉积盆地具有广泛的分布 ,因其性质复杂而成为中国区域性特殊岩土研究的重要对象。纵贯于南阳盆地和华北盆地西缘的南水北调中线工程长距离地开挖在不同的上第三系硬粘土中。本文在对南阳盆地、方城宝丰、邯郸永年三渠段上百个原状样的物质组成、物理性质、物化性质、膨胀性和收缩性、强度特性系统测试分析的基础上 ,总结了各类硬粘土的工程地质特性及其形成机理和变化规律 ,并根据不同湿度、围压状态下的试验结果分析了硬粘土的工程环境效应 ,这对于认识上第三系硬粘土在开挖运营条件下的变形破坏机理有着重要的理论和实际意义。