Three-dimensional active earth pressure from cohesive backfills with tensile strength cutoff

Most of previous analyses on the active earth pressure were performed in two-dimensional cases using the Mohr-Coulomb (M-C) failure function to describe the soil strength. However, all failures of retained slopes indicate a somewhat three-dimensional (3D) feature, and the M-C function is found to overestimate the tensile strength of cohesive soil. In this work, a kinematic limit analysis–based approach is developed for computing the 3D active earth pressure resulting from cohesive backfills. The concept of tensile strength cutoff is adopted to implement the reduction or elimination of tensile strength from the strength envelope. An extended 3D horn failure mechanism that is associated with the modified strength envelope is developed to characterize the collapse of retained slopes. The resultant of active earth pressure is evaluated from the work rate balance equation and expressed as an unfactored coefficient. The obtained results indicate that less support provided by the wall is required when allowing the existence of soil cohesion and 3D effects and that eliminating the tensile strength can observably increase the active earth pressure, especially for the backfill with a great level of cohesion.     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。     

An analytical study on three‐dimensional versus two‐dimensional water table‐induced flow patterns in a Tóthian basin

Although it has been increasingly acknowledged that groundwater flow pattern is complicated in the three‐dimensional (3‐D) domain, two‐dimensional (2‐D) water table‐induced flow models are still widely used to delineate basin‐scale groundwater circulation. However, the validity of 2‐D cross‐sectional flow field induced by water table has been seldom examined. Here, we derive the analytical solution of 3‐D water table‐induced hydraulic head in a Tóthian basin and then examine the validity of 2‐D cross‐sectional models by comparing the flow fields of selected cross sections calculated by the 2‐D cross‐sectional model with those by the 3‐D model, which represents the “true” cases. For cross sections in the recharge or discharge area of the 3‐D basin, even if head difference is not significant, the 2‐D cross‐sectional models result in flow patterns absolutely different from the true ones. For the cross section following the principal direction of groundwater flow, although 2‐D cross‐sectional models would overestimate the penetrating depth of local flow systems and underestimate the recharge/discharge flux, the flow pattern from the cross‐sectional model is similar to the true one and could be close enough to the true one by adjusting the decay exponent and anisotropy ratio of permeability. Consequently, to determine whether a 2‐D cross‐sectional model is applicable, a comparison of hydraulic head difference between 2‐D and 3‐D solutions is not enough. Instead, the similarity of flow pattern should be considered to determine whether a cross‐sectional model is applicable. This study improves understanding of groundwater flow induced by more natural water table undulations in the 3‐D domain and the limitations of 2‐D models accounting for cross‐sectional water table undulation only.     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

利用3S技术及三维激光扫描仪进行耕地损毁勘测

利用RS技术发现耕地损毁,网络RTK测量耕地损毁范围及面积,GIS提取耕地被损毁前的分类面积和等别,以及利用网络RTK配合Maptek I-Site8810三维激光扫描仪重构损毁耕地三维模型。     

真三维立体显示技术在不动产登记统一平台中的应用研究

随着国家不动产统一登记制度的实施,城市房屋、林地、草原、土地等不动产统一整合、调查和管理工作迫在眉睫。基于机载多角度倾斜摄影和激光雷达扫描技术的创新,真三维数据可为不动产登记提供真实统一、高精度、多层次的空间载体,保证了城市不动产登记应用创新和制度创新。