Hydration and refractive indices of Holocene tephra glass in Hokkaido, Northern Japan

Refractive indices of incompletely hydrated tephra glasses vary widely. Thus, glass refractive index is not a practical indicator for identifying Holocene tephras. Hydration near the surface of tephra glass shards can be removed by either hydrofluoric acid treatment or annealing for 12 h at 400°C. The annealing procedure is a particularly reliable and simple way to dehydrate tephra glasses. Standard deviations (s) of refractive indices for glasses after 12 h annealing are small (s=0.0014–0.0018), in contrast with untreated glasses (s=0.0034–0.0405). The refractive indices of dehydrated tephra glasses are 0.006–0.014 lower than those of the untreated (hydrated) glasses. Using the 400°C 12-h annealing procedure, values for the refractive indices of eight Holocene tephras in Hokkaido were obtained. These refractive indices are useful indicators for identification and correlation of Holocene tephras.     

Modelling of meteorological conditions at an urban scale for the PUMA winter campaign

For the winter 2000 campaign of the Pollution of Urban Midlands Atmosphere project, observation and numerical modelling of meteorological conditions over the West Midlands conurbation, UK, was undertaken. Modelling was performed using the regional atmospheric meteorological system (RAMS). This paper presents a comparison of modelled and observed wind and temperature for 25 and 26 January 2000. The RAMS model uses two nested grids with a mesh size of 2 km for the inner grid which is embedded in the outer grid with a mesh size of 8 km. Statistical evaluation of the model results against the observational data of wind speed, direction and temperature at 10 m was conducted. In general, the modelling results are in a reasonable agreement with observation. The statistical evaluation suggests that model performance is poorer for the inner grid than the outer grid as the model uncertainties (mainly mean bias) transfer from the outer to inner one. The low indices of agreement of temperature and wind are mainly associated with the systematic root-mean-square-difference values. For temperature, the systematic bias may also be affected by representation of cloud amount by the model. For wind, the model tends to have a poor performance for calm conditions, as under a stable anti-cyclonic situation local wind patterns associated with topography may develop, although the topography of the region is relatively flat. The results for the inner grid reveal some subtle spatial patterns at a scale smaller than 10 km near hills and valleys with differences in elevation of a few hundred metres.     

Development and testing of numerical methods for two-way nested air pollution modelling

A new 3-D model REGINA (REGIonal high resolutioN Air pollution model) is under development at the National Environmental Research Institute (NERI). The model is based on pieces from several models developed over the last decades at NERI. The aim of the work is to develop a nested model which can operate with very high resolution in both space and time. To fulfill this aim the choice and implementation of accurate numerical methods is crucial. The model will be applied for studying air pollution phenomena (both monitoring, forecasting and scenarios) over Denmark. The present paper is focussed on the modification, implementation and testing of a numerical method for treating the horizontal advection in the model as well as the implementation of two-way nesting techniques. The horizontal transport in the model is solved using an accurate space derivative algorithm. This method is traditionally implemented with periodic boundary conditions, however, this is not an option for nested modelling. A new method for calculating non-periodic boundary conditions has been developed in order to overcome this problem. Extensive testing of the numerical solution of the advection and the coupling of the solution of advection and chemistry in the model using Molenkamp–Crowley rotation tests have been carried out. The results show that the model with the current implementation of numerical methods is suitable for calculating air pollution levels with high resolution.     

螺旋CT三维重建在骨盆骨折中的应用

目的：探讨用螺旋CT三维重建评价骨盆骨折的临床应用价值。方法：收集骨盆骨折17例，采用螺旋CT三维重建检查。结果：17例检查均取得清晰立体图像，且可消除某一骨性结构，单独观察骨盆某一组成骨的骨折情况。结论：螺旋CT三维重建在骨盆骨折的诊断、手术方案的设计及教学等有较高价值。     

2002年CT扫描和三维成像学术年会评述

由CT理论与应用研究编辑部和北京信息工程学院主办、有中国体视学学会多位理事和会员参加的“2002年CT扫描和三维成像研讨会（CT科技学术年会）”于2002年10月18－20日，在北京大学逸夫苑理科楼学术报告厅举行。中国体视学学会副理事长刘国权教授出席致辞，对于这次CT科技年会的召开表示祝贺，并介绍了2003年在美国圣迭戈和北京将要召开第11届国际体视学会大会的有关情况，希望有关专家准备论文出席，来自全国各地48位专家，教授出席了会议，本次会议涉及CT理论、计算方法和软件及硬件技术；医学CT扫描成像和疾病诊断；工业CT和三维成像：地球层析和工程CT。美国爱荷华大学王革教授，纽约罗彻斯特大学宁若拉教授专程到会，分别做了精彩的特邀主题报告：显微CT的锥束重建新方法和近年来在这方面的进展和展望”，“锥光束三维CT技术在美国的过去、现在和未来”“国内专家也报告了前沿研究的新成果，在会前，CT理论与应用研究编辑部，根据收到的论文和摘要汇编和印制了专集，在会议最后一天，召开了“CT理论与应用研究”期刊编委会，传达了中国科协对于办好科技期刊的新要求，会议开得很成功。     

中国西南及邻区上地幔P波三维速度结构/

利用ISC报告以及中国和NEIC基本测震台网报告中的80974条P波初至到时资料（地震数为7053，台站数为165，且地震和台站都分布在研究区内），对中国西南及邻区（北纬10～36、东经70～110）的深至400km的上地幔三维速度结构进行了研究，分辨率达22．初步结果表明:①研究区速度的横向不均匀性，虽随深度增加而减弱，但至400km深度时仍很明显；②在北纬16和24的纵剖面上，可以看到与印度板块向东和欧亚板块相碰撞挤压相对应的速度结构，以及印度板块与欧亚板块速度结构的差异．在东经90的纵剖面上，与印度板块向北俯冲到欧亚板块（青藏高原）之下相对应的速度结构也比较明显；③在90ｋｍ深度的横剖面上，由缅甸的密支那至越南的洞海的低速条带，可能与红河断裂带有关；④ 提出并使用了能够更为准确直观地描述分辨率好坏的图示方法．      

Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.     

Melting of β-quartz up to 2.0 GPa and thermodynamic optimization of the silica liquidus up to 6.0 GPa

Melting relations of β-quartz were experimentally determined at 1.0 GPa (1900±20 °C), 1.5 GPa (2033±20 °C), and 2.0 GPa (2145±20 °C) using a new high-pressure assembly in a piston–cylinder apparatus and substantial differences were found with data previously reported. The new melting data of β-quartz were combined and optimized with all available thermodynamic, volumetric, and phase equilibria data for β-cristobalite, β-quartz and coesite to produce a P–T liquidus diagram for silica valid up to 6.0 GPa. Using the new optimized thermodynamic parameters, the invariant point β-cristobalite+β-quartz+liquid and β-quartz+coesite+liquid were determined to lie at 1687±17 °C and 0.457 GPa, and 2425±25 °C and 5.00 GPa, respectively.     

Improved treatments for evaluating horizontal magnetic components through the 3-D FDM in E -polarization induction problems

To improve the accuracy of the numerical evaluation through the 3-D finite difference method, the surface boundary conditions are added to modify the old program. The author has tested the new program by making calculations for the model constructed by Wanamaker, et al (1984). The comparison between the numerical results obtained from this paper and those by Wannamaker, et al (1984) indicates that a pronounced improvement is realized in the evaluation of the horizontal magnetic components. Moreover, better calculations for the vertical magnetic components are also obtainable by using the new program.     

河南省农业气象情报资料处理系统

根据实际业务工作的需要，使用C＋＋Builder可视化开发工具，开发了Windows环境下的河南省农业气象情报资料处理系统，该系统具有报码分析、文本生成和图形显示等功能。