A rod-less piston corer for lake sediments; an improved, rope-operated percussion corer

A lightweight, percussion corer, suitable for use in remote lakes of moderate depth, is described. The operation of the corer and suggestions for securing and transporting long sediment cores are presented. In particular, the design and use of a recovery pot, which allows the retrieval of undisturbed cores from sediments of unknown depth, is detailed.     

The δ18O in the Guliya shallow ice core during the prevailing summer monsoons and sea-air interactions

The correlations of the δ¹⁸O_max in the shallow ice core from the Guliya ice cap on the Tibetan Plateau with the global sea surface temperatures (SST) and height at the 500 hPa over the Northern Hemisphere were analyzed. The correlated regions on oceans that have a significant influence on the δ¹⁸O_max in the Guliya ice core are all located in ocean currents, or convergent regions of currents. They are the eastern Equatorial Pacific, the Northern Pacific Current, the Hot Pool in the eastern Indian Ocean, the Mozambique Current, the Northern Atlantic Current, the Canary Current and the Atlantic Equatorial Current. The δ¹⁸O_max in the Guliya ice core has negative correlations with the SST located in the lower latitudes, and positive correlations with the SST in the middle latitudes. The correlated areas at the 500 hPa that have a great impact on the δ¹⁸O_max are located in the subtropical highs over the mid-low-latitude oceans and the long-wave trough area over Balkhash Lake, where there are marked negative correlations between the heights in those areas and the δ¹⁸O_max. The influencing mechanism is displayed by the diversity of the vapor origins transported to the Guliya region. The strengths of the European ridge and the ridge over Baikal Lake have notable positive correlations with the δ¹⁸O_max. The two systems indirectly influence the vapor transportation towards the Guliya region by the adjustment of long-wave trough and ridge.     

球面小波分析技术及在全球重力模型中的应用

在介绍球面小波理论的基础上,推导和比较了几种球面小波,分析了最新地球重力模型-EGM96,以此为依据,把球面小波多分辨分析用于计算全球自由空气异常及重力大地水准面,并对处理结果做出解释。     

全椒县范水洼金矿区控矿构造初步研究

研究区主要构造活动可分为3期：早期，发育以透入性的剪切劈理为特征的复式褶皱及倒转翼的逆冲剪切减薄拉断作用；中期，伸展作用；后期，脆性的挤压剪切破碎作用。通过详细地质构造剖面测制。建立了区内的主要构造格架：总体为一复式向斜一汪洼向斜，以杨柳岗组中上段为两翼，以琅琊山组为核，二级褶皱总体表现为向斜开阔，背斜紧闭，向南东倒伏的特征；二级褶皱的转折端为主要的控矿容矿构造，矿(化)体主要赋存于复式向斜的核部、背斜转折端。二级褶皱背斜转折端的拉张垮塌破碎角砾岩及翼部特别是近倒转翼的剪切破碎带是最重要的控矿容矿构造。     

东南极伊利莎白公主地LGB65点的雪层密度与剖面特征

对东南极冰盖伊利莎白公主地LGB65点的50m雪芯及雪坑进行了雪层密度与剖面分析。结果表明，该处雪的密实化过程属冷型落实化类型，第一和第二临界密度深度分别为10．4m和60．4m深霜不育，雪层中为数不多的雏形深霜层厚度仅几厘米，多分布在冰壳层的上、下两侧，16．0m以上，发芯透光性的变化不明显，之下，透光性逐渐表现出韵律变化，雪层中辐射壳和风壳频繁出现，其中辐射壳可作为划分年层的重要依据，综合雪层内的各种层位特征，初步划分出LGB65雪芯的年层约为243a，总的年平均积累率为131．9mm，20世纪60年代年积累率低于平均水平，70年代中期以后，;积累率出现大幅度增加，进250a来该处的年积累率呈增大趋势。     

赣中变质岩带对该区铀成矿控制作用的研究

本文从变质岩带的含铀性分析入手,研究了赣中变质岩带中铀矿化与变质岩带的含铀性、构造岩浆活动带、变质岩带出露的动力学机制及变质核杂岩构造的关系。研究表明:铀成矿与构造岩浆活动带以及地壳减薄、地幔上隆和在变质核杂岩边缘沿着低角度正断层的地壳伸展构造有着实质的关系。     

浅谈野外岩心地质编录工作

岩心地质编录是收集和观察研究岩心中所赋存的各种地质信息和地质现象的一项重要的基础性地质工作。本文根据具体实践经验，简要介绍了岩心地质编录工作的3个阶段以及贯穿于编录工作始终的取样工作。     

Quaternary vertical offset and average slip rate of the Nojima Fault on Awaji Island, Japan

Abstract Drilling was carried out to penetrate the Nojima Fault where the surface rupture occurred associated with the 1995 Hyogo-ken Nanbu earthquake. Two 500 m boreholes were successfully drilled through the fault zone at a depth of 389.4 m. The drilling data show that the relative uplift of the south-east side of the Nojima Fault (south-west segment) was approximately 230 m. The Nojima branch fault, which branches from the Nojima Fault, is inferred to extend to the Asano Fault. From the structural contour map of basal unconformity of the Kobe Group, the vertical component of displacement of the Nojima branch–Asano Fault is estimated to be 260–310 m. Because the vertical component of displacement on the Nojima Fault of the north-east segment is a total of those of the Nojima Fault of the south-west segment and of the Nojima branch–Asano Fault, it is estimated to total to 490–540 m. From this, the average vertical component of the slip rate on the Nojima Fault is estimated to be 0.4–0.45 m/10³ years for the past 1.2 million years.     

Evaluation of density in layer compaction using SASW method

SASW test, which is non-intrusive and rapid in the field application, was used to evaluate the layer density in the roller compaction without performing the complicated inversion process. The concept of normalized shear wave velocity was introduced to minimize the effect of confinement in the density evaluation. SASW test was performed to determine the shear wave velocity of the layer, and the free–free resonant column (FF–RC) test was adopted to determine the correlation between the normalized shear wave velocity and density of the site, which is almost unique independent of confinement. Testing and data reduction procedures of both tests were briefly discussed and an evaluation procedure of the field density was proposed by effectively combining in-situ shear wave velocity determined by the SASW test with the correlation between the normalized shear wave velocity and the density determined by the FF–RC test. Finally, the feasibility of the proposed method was verified by performing a field case study at Hoengsung road construction site. Field densities determined by the proposed method matched well with those determined by sand cone tests, showing the potential of applying the proposed method in the field density evaluation.