发射光谱载体蒸馏法测定地质样品中微量硼铍锡银

选择了适合的缓冲剂,利用载体蒸馏法将被测元素与基体元素分离,使Be转变为易挥发的氟化物与B、Sn、Ag同时蒸发;降低了谱线背景及元素检出限;加入内标元素Au、Bi,提高了方法的准确度和精密度;采用普通 3mm×3mm×0.7mm杯型电极,装样量少,操作简单。方法检出限(wB/10-6)分别可达B1.5、Be0.3、Sn0.8、Ag0.02;准确度(Δlog C)基本在-0.05～0.05,精密度(RSD,n=8)为2.9%～17%。     

基于三角网渐进式简化的等高线多尺度综合

提出了一种基于三角网渐进式简化的等高线多尺度综合方法,实验结果表明,其不仅可以较好地保留地形特征,而且可以完全避免等高线相交现象的产生.     

等高线拓扑关系的构建以及应用

提出了等高线拓扑关系的描述框架 ,其规范化描述形式具有更强的适用性 ,使用三角网作为工具设计了建立拓扑关系的算法。以提出的拓扑关系描述为基础 ,具体实现了等高线高程自动赋值 ,处理过程可以同时考虑开曲线 (包括断线 )和闭曲线 ,提高了可靠性和自动化程度 ,并进一步将断线连接为完整目标 ,减少了人机交互的编辑工作     

Submillimeter-wave and observations of the event on 28 November, 2001

We present a detailed study of a 1B/M6.9 impulsive flare combining high time resolution (1 ms) and instantaneous emission source localization observations at submillimeter frequencies (212 GHz), obtained with the solar submillimeter telescope (SST), and Hα data from the Hα solar telescope for argentina (HASTA). The flare, starting at 16:34 UT, occurred in active region (AR) 9715 (NOAA number) on November 28, 2001, and was followed by an Hα surge. We complement our data with magnetograms from the Michelson Doppler Imager (SOHO/MDI). SST observed a short impulsive burst at 212 GHz, presenting a weak bulk emission (of about 90 sfu) composed of a few shorter duration structures. The integrated Hα and the 212 GHz light curves present a remarkable agreement during the impulsive phase of the event. The delay between both curves stays below 12 s (the time resolution of the Hα telescope). The flare as well as the surge are linked to new flux emergence very close to the main AR bipole. Taking into account the AR magnetic field evolution, we infer that magnetic field reconnection, occurring at low coronal levels, could have been at the origin of the flare; while in the case of surge this would happen at the chromospheric level.     

Experimental study on soil CO2 emission in the alpine grassland ecosystem on Tibetan Plateau

The Tibetan Plateau, the Roof of the World, is the highest plateau with a mean elevation of 4000 m. It is characterized by high levels of solar radiation, low air temperature and low air pressure compared to other regions around the world. The alpine grassland, a typical ecosystem in the Tibetan Plateau, is distributed across regions over the elevation of 4500 m. Few studies for carbon flux in alpine grassland on the Tibetan Plateau were conducted due to rigorous natural conditions. A study of soil respiration under alpine grassland ecosystem on the Tibetan Plateau from October 1999 to October 2001 was conducted at Pangkog County, Tibetan Plateau (31.23°N, 90.01°E, elevation 4800 m). The measurements were taken using a static closed chamber technique, usually every two weeks during the summer and at other times at monthly intervals. The obvious diurnal variation of CO2 emissions from soil with higher emission during daytime and lower emission during nighttime was discovered. Diurnal CO2 flux fluctuated from minimum at 05:00 to maximum at 14:00 in local time. Seasonal CO2 fluxes increased in summer and decreased in winter, representing a great variation of seasonal soil respiration. The mean soil CO2 fluxes in the alpine grassland ecosystem were 21.39 mgCO2 · m-2 · h-1, with an average annual amount of soil respiration of 187.46 gCO2 · m-2 · a-1. Net ecosystem productivity is also estimated, which indicated that the alpine grassland ecosystem is a carbon sink.     

Study of statistically correcting model CMAQ-MOS for forecasting regional air quality

Based on analysis of the air pollution observational data at 8 observation sites in Beijing including outer suburbs during the period from September 2004 to March 2005, this paper reveals synchronal and in-phase characteristics in the spatial and temporal variation of air pollutants on a city-proper scale at deferent sites; describes seasonal differences of the pollutant emission influence between the heating and non-heating periods, also significantly local differences of the pollutant emission influence between the urban district and outer suburbs, i.e. the spatial and temporal distribution of air pollutant is closely related with that of the pollutant emission intensity. This study shows that due to complexity of the spatial and temporal distribution of pollution emission sources, the new generation Community Multi-scale Air Quality (CMAQ) model developed by the EPA of USA produced forecasts, as other models did, with a systematic error of significantly lower than observations, albeit the model has better capability than previous models had in predicting the spatial distribution and variation tendency of multi-sort pollutants. The reason might be that the CMAQ adopts average amount of pollutant emission inventory, so that the model is difficult to objectively and finely describe the distribution and variation of pollution emission sources intensity on different spatial and temporal scales in the areas, in which the pollution is to be forecast. In order to correct the systematic prediction error resulting from the average pollutant emission inventory in CMAQ, this study proposes a new way of combining dynamics and statistics and establishes a statistically correcting model CMAQ-MOS for forecasts of regional air quality by utilizing the relationship of CMAQ outputs with corresponding observations, and tests the forecast capability. The investigation of experiments presents that CMAQ-MOS reduces the systematic errors of CMAQ because of the uncertainty of pollution emission inventory and improves the forecast level of air quality. Also this work employed a way of combining point and area forecasting, i.e. taking the products of CMAQ for a center site to forecast air pollution for other sites in vicinity with the scheme of model products "reanalysis" and average over the "area".     

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.     

On Tension Failure of 2-D Rock Specimens and Associated Acoustic Emission

Summary To understand the failure mechanism of quasi-brittle materials like rock under tensile stress, observations on the failure process of granite and marble plate specimens under tension are summarized and presented. Micro- and macro-failure properties of rock plates under uniaxial tension have been characterized by using an acoustic emission technique. Acoustic emission signals associated with micro-fractures are captured to locate the sources. An algorithm based on arrival time difference is developed for this purpose. The results reveal clearly the failure processes of rock which include initiation, nucleation and propagation of micro-fractures when the axial stress is close to the peak strength of rock. It is believed that the difference in heterogeneity between granite and marble specimens leads to different fracture shapes and different behaviors of associated acoustic emissions. Numerical simulation of acoustic emissions for two-dimensional tensile test is also carried out. The simulated characteristics are in good agreement with the experimental results.     

基于地性线分级的DEM信息量计算方法研究

主要对基于DEM提取的地性线进行信息量的定量分析,探讨地性线的信息量与分辨率、地形单元的关系。这个过程中首先利用河网的自相似理论研究与当前DEM所代表的地貌详细程度相适宜的地性线提取的阈值区间,并讨论此阈值下地性线的分级,以此为基础通过以该分级为权重进行DEM地形信息量的计算。实践证明,这种顾及地性线等级的DEM信息量计算方法能较准确地反映地性线的分布规律和不同等级的要素造成的信息量度量差异。     

基于等高线隔断线确定DEM适宜分辨率的方法研究

分辨率是等高线数据插值生成格网DEM数据过程中需要考虑的一个重要参数,适宜的分辨率既能将等高线高程信息尽可能保留,又不会因插值造成数据冗余及误差。基于对格网DEM生成方式的理解,提出了等高线隔断线的相关概念,分析了基于地形图矢量化的等高线数据插值生成格网DEM数据,由不同长度等高线隔断线频率统计来确定格网适宜分辨率参考值的方法。同时,不同长度等高线隔断线的长度与其频率相乘得到标准长度,以及等高线隔断线中心点生成的密度分析图,均可在频率特征决定适宜分辨率参考值时起到一定的参考作用。通过样区实验验证,实现简便,可度量性强,与其他相关研究具有一致性,对确定适宜格网分辨率参考值具有一定的借鉴意义。