Dynamic analysis of strain localization in water‐saturated clay using a cyclic elasto‐viscoplastic model

A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd.     

Vertical vibration of a rigid strip footing on viscoelastic half-space

This paper presents an analytical method for modeling the dynamic response of a rigid strip footing subjected to vertical-only loads. The footing is assumed to rest on the surface of a viscoelastic half-space; therefore, effects of hysteretic soil damping on the impedance of the foundation and the generated ground vibrations are considered in the solution. To solve the mixed boundary value problem, we use the Fourier transform to cast a pair of dual integral equations providing contact stresses, which are solved by means of Jacobi orthogonal polynomials. The resulting soil and footing displacements and stresses are obtained by means of the Fourier inverse transform. The solution provides more realistic estimates of footing impedance, compared to existing solutions for elastic soil, as well as of the attenuation of ground vibrations with distance of the footing. The latter is important for the estimation of machine vibration effects on nearby structures and installations.     

Dynamic response of a pile considering the interaction of pile variable cross section with the surrounding layered soil

Assuming that the pile variable cross section interacts with the surrounding soil in the same way as the pile toe does with the bearing stratus, the interaction of pile variable cross section with the surrounding soil is represented by a Voigt model, which consists of a spring and a damper connected in parallel, and the spring constant and damper coefficient are derived. Thus, a more rigid pile–soil interaction model is proposed. The surrounding soil layers are modeled as axisymmetric continuum in which its vertical displacements are taken into account and the pile is assumed to be a Rayleigh–Love rod with material damping. Allowing for soil properties and pile defects, the pile–soil system is divided into several layers. By means of Laplace transform, the governing equations of soil layers are solved in frequency domain, and a new relationship linking the impedance functions at the variable‐section interface between the adjacent pile segments is derived using a Heaviside step function, which is called amended impedance function transfer method. On this basis, the impedance function at pile top is derived by amended impedance function transfer method proposed in this paper. Then, the velocity response at pile top can be obtained by means of inverse Fourier transform and convolution theorem. The effects of pile–soil system parameters are studied, and some conclusions are proposed. Then, an engineering example is given to confirm the rationality of the solution proposed in this paper. Copyright © 2017 John Wiley & Sons, Ltd.     

临震前地壳变形不动点现象与机制研究

在综合分析国内外地形变前兆研究现状的基础上,结合汶川8.0级地震前GPS、应变、重力等研究结果,提出临震前震源区域可能出现变形不动点现象。地壳变形过程中的不动点现象是临震前区域应力场进入临界状态的重要标志,是地震潜在危险区域划定的重要依据。借助不动点理论,给出汶川地震前变形不动点集合的演化,结合大区域地震活动空区与远场显著形变异常分布,探讨变形不动点现象发生的动力学背景,验证了汶川地震前地壳变形的不动点现象是大区域应力场有序运动的结果。     

Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.     

超高层建筑GPS实时动态监测技术研究

在特高等级精密工程的测量范畴内,实现对超高层建筑的施工监测是一个非常重要的工作内容,GPS实时动态监测技术在监测中发挥着不可忽视的作用。本文首先对GPS监测技术做简要阐述,并分析了超高层建筑的特点;然后指出了GPS监测技术在施工监测中所发挥的作用;最后结合案例,具体分析了GPS监测技术在超高层建筑中的应用,以期为超高层建筑GPS实时动态监测技术的相关研究提供部分参考意见。     

2000～2015年会理县地表覆盖变化监测

以LandSat多时相影像为数据源,采用基于规则的面向对象分类方法,监测会理县2000～ 2015年地表覆盖变化.结合1∶50 000 DEM数据,分析了会理县地表覆盖构成与转移、变化动态度及潜在退耕地情况.监测分析结论能为会理县加强空间管制、促进土地资源集约利用、指导生态文明建设等提供决策信息支撑.     

Incorporation of a dynamic root distribution into CLM4.5: Evaluation of carbon and water fluxes over the Amazon

Roots are responsible for the uptake of water and nutrients by plants and have the plasticity to dynamically respond to different environmental conditions. However, most land surface models currently prescribe rooting profiles as a function only of vegetation type, with no consideration of the surroundings. In this study, a dynamic rooting scheme, which describes root growth as a compromise between water and nitrogen availability, was incorporated into CLM4.5 with carbon–nitrogen(CN) interactions(CLM4.5-CN) to investigate the effects of a dynamic root distribution on eco-hydrological modeling. Two paired numerical simulations were conducted for the Tapajos National Forest km83(BRSa3) site and the Amazon, one using CLM4.5-CN without the dynamic rooting scheme and the other including the proposed scheme. Simulations for the BRSa3 site showed that inclusion of the dynamic rooting scheme increased the amplitudes and peak values of diurnal gross primary production(GPP) and latent heat flux(LE) for the dry season, and improved the carbon(C) and water cycle modeling by reducing the RMSE of GPP by 0.4 g C m~(-2)d~(-1), net ecosystem exchange by 1.96 g C m~(-2)d~(-1), LE by 5.0 W m~(-2), and soil moisture by 0.03 m~3m~(-3), at the seasonal scale, compared with eddy flux measurements, while having little impact during the wet season. For the Amazon, regional analysis also revealed that vegetation responses(including GPP and LE) to seasonal drought and the severe drought of 2005 were better captured with the dynamic rooting scheme incorporated.     

变分同化框架通过背景误差协方差构建动力平衡约束的研究进展

通过背景误差协方差构建动力平衡约束是变分同化框架设计的重要环节。它不仅帮助实现变量间的协同分析,提高观测使用效率,还能改善变分极小化问题的性状。本文在系统梳理通过背景误差协方差引入动力平衡约束的方式、流程的基础上,对求解目前全球和有限区域变分同化系统普遍采用的准地转平衡和静力平衡约束的共性问题和存在的不足作了归纳总结。分析了求解准地转平衡约束的三类方案:动力平衡方程方案、统计方案和动力-统计相结合方案的优缺点。对照比较了不同垂直离散方案下求解静力平衡约束时遇到的欠定问题的表现以及解决途径。最后,展望了基于背景误差协方差构建动力平衡约束在赤道等特殊地区、高分辨率同化系统、以及集合-变分混合同化系统发展中面临的挑战和机遇。     

北斗卫星导航系统双差动力法精密定轨及其精度分析

针对GEO卫星切向轨道分量与双差模糊度强相关的问题,对经典双差动力法进行了改进,提出联合使用载波相位和相位平滑伪距实现北斗系统精密定轨,并从理论上分析了以上处理策略的可行性及对模糊度固定的影响,然后结合北斗系统精密定轨特点,推导给出了利用QIF方法实现北斗卫星双差模糊度固定的基本原理,实测数据分析表明:联合载波相位和相位平滑伪距,既可降低相关性,又可兼顾精度,定轨效果优于经典双差动力法;利用QIF方法能够取得一定的模糊度固定效果,但受观测条件限制,北斗卫星双差模糊度固定成功率整体不高,双差模糊度固定之后对轨道的改进作用有限。