从高铝粉煤灰中提取非晶态SiO2的实验研究

为了有效提高高铝粉煤灰的Al/Si比,为提取氧化铝奠定基础,研究了用NaOH从高铝粉煤灰中提取非晶态SiO2的最佳工艺条件,并对提硅反应的机理进行了探讨。首先根据高铝粉煤灰的化学与物相组成特点,确立了利用NaOH提取非晶态SiO2的基本技术路线;然后用正交实验法确定了提硅的最佳条件:NaOH的浓度25%,灰碱质量比1∶0.5,反应温度95℃,反应时间4 h。经最佳条件反应之后,SiO2的提取率达到了41.8%,灰中Al2O3的含量由48.5%增加到了57.38%,Al2O3/SiO2质量比由1.29提高到了2.39。     

土壤、大气尘中晶体的组成及其物源指示意义——以长沙、株洲和湘潭地区为例

基于长沙、株洲和湘潭地区大气尘(可吸入颗粒和近地表积尘)和表层土壤的X-射线衍射(XRD)分析数据,采用微量相鉴定方法获得的结果显示,大气尘和表层土壤中包含石英、石膏、方解石、白云石、硫酸镉等自然矿物及SiS_2、NiTi、Cd_3As_2、FeOCl等非自然源晶体。比较了长沙、株洲、湘潭地区大气尘与表层土壤的晶体组成,分析了大气尘矿物及非自然源晶体的空间分布,探讨了其环境指示意义。     

Thermal alteration of coal in the Khasyn coalfield, Magadan region, Russia

The Early Cretaceous coal deposits of the Khasyn coalfield are intruded by Palaeogene diabase dikes. The coal has vitrinite reflectance values of 2.0–2.5% R_o, and characteristics of normal anthracite at some distance from the dikes, but at direct contact with the dike two morphological coal varieties occur: coal inclusions in the diabase dike and dispersed carbonaceous matter within the dike rock. Both types of coaly matter have properties typical of anthracites: strong anisotropy, altered internal structure and high vitrinite reflectance values ranging from 3.8 to 5.5% R_o. The X-ray diffraction measurements of the interplanar spacing d(002) and the crystallite sizes Lc and La show rather similar values for coal inclusions in the dike and dispersed carbonaceous matter. The additional reflection at 3.37 Å, corresponding to semi-graphite admixture, occurs in the coal and carbonaceous matter inside the dike and is absent in the natural coal outside the dike.     

Simulating coseismic deformation of quartz in the middle crust and fabric evolution during postseismic stress relaxation — An experimental study

Non-steady state deformation and annealing experiments on vein quartz are designed to simulate earthquake-driven episodic deformation in the middle crust. Three types of experiments were carried out using a modified Griggs-type solid medium deformation apparatus. All three start with high stress deformation at a temperature of 400 °C and a constant strain rate of 10^− 4 s^− 1 (type A), some are followed by annealing in the stability field of α-quartz for 14–15 h at zero nominal differential stress and temperatures of 800–1000 °C (type A + B), or by annealing for 15 h at 900 °C and at a residual stress (type A + C).The quartz samples reveal a very high strength > 2 GPa at a few percent of permanent strain. The microstructures after short-term high stress deformation (type A) record localized brittle and plastic deformation. Statisc annealing (type A + B) results in recrystallisation restricted to the highly damaged zones. The new grains aligned in strings and without crystallographic preferred orientation, indicate nucleation and growth. Annealing at non-hydrostatic conditions (type A + C) results in shear zones that also develop from deformation bands or cracks that formed during the preceding high stress deformation. In this case, however, the recrystallised zone is several grain diameters wide, the grains are elongate, and a marked crystallographic preferred orientation indicates flow by dislocation creep with dynamic recrystallisation. Quartz microstructures identical to those produced in type A + B experiments are observed in cores recovered from Long Valley Exploratory Well in the Quaternary Long Valley Caldera, California, with considerable seismic activity.The experiments demonstrate the behaviour of quartz at coseismic loading (type A) and subsequent static annealing (type A + B) or creep at decaying stress (type A + C) in the middle crust. The experimentally produced microfabrics allow to identify similar processes and conditions in exhumed rocks.     

新矿物(19931～199312)

本文以表格形式列举了１９９３年１月至１９９３年１２月经《国际矿物学协会（ＩＭＡ）新矿物与矿物命名委员会（ＣＮＭＭＮ）》批准并在各国矿物学杂志上发表的４２个新矿物的中文英文名称、化学式及其他数据。数据依次为：矿物的晶系、空间群、晶胞参数、主要粉晶数据（Ｉ、ｈｋｌ）、物理性质（晶形、颜色、条痕、光泽、解理、发光、硬度、密度等）、光学性质（一、二轴晶,正、负光性,折光率,反射率,双反射,２Ｖ,色散,吸收性,多色性等）、产状、共生矿物等。     

Some remarks on the Gaussian beam summation method

Summary. Recently, a method using superposition of Gaussian beams has been proposed for the solution of high-frequency wave problems. The method is a potentially useful approach when the more usual techniques of ray theory fail: it gives answers which are finite at caustics, computes a nonzero field in shadow zones, and exhibits critical angle phenomena, including head waves. Subsequent tests by several authors have been encouraging, although some reported solutions show an unexplained dependence on the 'free' complex parameter ε which specifies the initial widths and phases of the Gaussian beams.
We use methods of uniform asymptotic expansions to explain the behaviour of the Gaussian beam method. We show how it computes correctly the entire caustic boundary layer of a caustic of arbitrary complexity, and computes correctly in a region of critical reflection. However, the beam solution for head waves and in edge-diffracted shadow zones are shown to have the correct asymptotic form, but with governing parameters that are explicitly ε-dependent. We also explain the mechanism by which the beam solution degrades when there are strong lateral inhomogeneities. We compare numerically our predictions for some representative, model problems, with exact solutions obtained by other means.     

Wave driven free surface motion in the gap between a tanker and an FLNG barge

When two vessels are moored side-by-side with a narrow gap between them, intense free surface motions may be excited in the gap as a result of complex hydrodynamic interactions. These influence the motions of the two vessels, and the forces in any moorings. The present paper uses first and second order wave diffraction analysis to investigate this phenomenon. Key theoretical aspects of the numerical analysis are first summarised, including the vital need to suppress “irregular frequency” effects; and results are given to validate the code used. The case of a tanker alongside a large floating FLNG barge is then considered in detail.     

A laboratory study on capillary sealing efficiency of Iranian shale and anhydrite caprocks

Caprock has the most important role in the long term safety of formation gas storage. The caprocks trap fluid accumulated beneath, contribute to lateral migration of this fluid and impede its upward migration. The rapid upward passage of invasive plumes due to buoyancy pressure is prevented by capillary pressure within these seal rocks. In the present study, two main seal rocks, from the Zagros basin in the southwest of Iran, a shale core sample of Asmari formation and an anhydrite core sample of Gachsaran formation, were provided. Absolute permeabilities of shale and anhydrite cores, considering the Klinkenberg effect, were measured as 6.09 × 10⁻¹⁸ and 0.89 × 10⁻¹⁸ m², respectively. Capillary sealing efficiency of the cores was investigated using gas breakthrough experiments. To do so, two distinct techniques including step by step and residual capillary pressure approaches were performed, using carbon dioxide, nitrogen and methane gases at temperatures of 70 and 90 °C, under confining pressures in the range 24.13–37.92 MPa. In the first technique, it was found that capillary breakthrough pressure of the cores varies in the range from 2.76 to 34.34 MPa. Moreover, the measurements indicated that after capillary breakthrough, gas effective permeabilities lie in range 1.85 × 10⁻²¹ – 1.66 × 10⁻¹⁹ m². In the second technique, the minimum capillary displacement pressure of shale varied from 0.66 to 1.45 MPa with the maximum effective permeability around 7.76 × 10⁻²¹ – 6.69 × 10⁻²⁰ m². The results indicate that anhydrite caprock of the Gachsaran formation provides proper capillary sealing efficacy, suitable for long term storage of the injected CO₂ plumes, due to its higher capillary breakthrough pressure and lower gas effective permeability.     

北冰洋西部表层沉积物矿物学特征及其物质来源

对北冰洋西部79个表层沉积物样品进行了全岩X射线衍射矿物组成分析,结合洋流和地质背景,探讨各矿物分区的物质来源。矿物组合分区表明研究区物质来源变化较为复杂:(1)在楚科奇海的中部靠近白令海峡处长石含量很高,主要是阿纳德尔流携带的来自阿纳德尔河的沉积物;在楚科奇海的西侧的长石含量也较高,且与其他矿物组合分区相比,角闪石含量较高,这是因为受阿纳德尔流和东西伯利亚沿岸流的双重影响,沉积物来自西伯利亚陆地的一些高含长石的火山岩及沉积岩等。在楚科奇海的东侧,石英含量很高,来源为阿拉斯加沿岸流携带的育空河及卡斯奎姆河的沉积物。在阿拉斯加北部,碳酸盐岩和石英含量高,这与马更些河搬运的沉积物有关;(2)北冰洋西部深水区中加拿大海盆的南端和中部方解石和白云石的含量较低,说明受波弗特环流携带的加拿大北极群岛的碳酸盐影响相对较小,且与其他矿物组合分区相比,云母含量最高,说明沉积物主要来源为来自拉普捷夫海的海冰沉积物;此外,一些黏土级细粒物质可能由大西洋中层水携带而来。深水区的其他海域以方解石和白云石含量高为特点,主要受波弗特环流的影响,来源主要为加拿大北极群岛的班克斯岛和维多利亚岛;此外,还受来自西伯利亚陆架,主要是拉普捷夫海沉积物的影响。     

港池泊稳的能量平衡方程数值模拟

对基于能量平衡方程的多向随机波浪传播数学模型进行改进,通过模拟不同防波堤绕射引起的港池泊稳,验证模型的合理性和有效性。利用非线性弥散关系提高模型计算浅水变形的精度;采用二次逆风差分格式离散控制方程,避免了加入绕射项引起的数值耗散;并将文氏谱加入模型中,使其更加适合中国海域的工程应用。应用改进后模型绘制的双突堤和岛式防波堤绕射系数图与我国《海港水文规范》图进行了对比。对比结果十分接近,可以较好地描述港池的泊稳状况,为综合计算波浪在近岸的浅水变形、折射、绕射、反射和能量耗散等作用奠定了基础。