Seismic horizontal pullout capacity of shallow vertical anchors in sand

The concept of the equivalent free surface has been extended to determine the seismic horizontal pullout capacity of shallow vertical strip plate anchors buried in sand. The analysis has been done rigorously by using the method of stress characteristics. The results have been expressed in the form of non-dimensional charts. The pullout resistance has been found to reduce quite extensively with increase in the magnitude of horizontal earthquake acceleration. The results were compared with the previously published data, and it was seen that the computed pullout resistance with the proposed method was found to be lowest. This revised version was published online in July 2006 with corrections to the Cover Date.     

The characteristics of Asian dust events in Northeast Asia during the springtime from 1993 to 2004

The characteristics of Asian dust events that occurred in Northeast Asia during the springtime from 1993 to 2004 are investigated using 3-hourly SYNOP reports (World Meteorological Organization). Occurrences of blowing sand and dust storm are low in 1997 and 1999, but have increased rapidly since 2000. The maximum occurrence was recorded in 2002. Wind velocity of 6.5 m s^− 1 as a threshold wind velocity is not so exactly consistent with the occurrence of blowing sand. However, wind velocity of 14 m s^− 1 as a strong wind causing dust storm had similar tendency to those of dust storm and Dust Storm Index.Source regions of Asian dust are divided into three regions (A: dry arid, B: semi-arid, and C: cultivated), based upon the occurrence of blowing sand and dust storm. Eight meteorological stations are selected in three regions, which have frequent occurrences of blowing sand. Source regions of Asian dust that affect the Korean peninsula are gradually extending eastward. Positive anomalies of NDVI occurred in 1994, 1995, and 1998 when temperature was high and precipitation was heavy. However, the frequent occurrence of the dust phenomena is not always consistent with lots of vegetation, high temperature, and much precipitation in this study.     

长江口悬沙颗粒的现场测量

我们利用自．行研制的“光学悬浮沙粒径谱仪”对长江口悬沙颗粒进行了现场测量,同时作了现场采样,经华东师范大学河口海岸国家重点实验室分析,分析结果与仪器现场测量结果进行了对比,结果表明,两种方法得到的平均粒径和悬沙浓度基本一致。     

黄海辐射沙洲沉积物地球化学特征及其环境意义

对黄海辐射沙洲烂沙洋水道区域的3个钻孔共81个沉积物样品进行了微量、常量元素分析和^14C测年分析．化学元素质量分数的变化与当时沉积环境的变化相对应。突发事件(如风暴潮)的发生不但在沉积物的岩性上有所体现,而且在微量元素质量分数的变化上也有很明显的体现。微量元素Zr可作为沉积能量变化的地化指示剂,潮汐通道北部的西太阳沙区域的沉积动力环境在4000a以前是较弱的。潮流通道的上段沉积物是来自水深较浅的区域,由于潮流和波浪的作用使其能够保持稳定的水深。     

西洋东大港水道流速垂线分布研究

对辐射沙洲海域东大港4#站位连续2个潮周期的流速测量资料进行了分析、研究,拟合给出了流速垂线分布关系,并根据实际测量资料确定了该站位6个水层的浑水水流尾流函数项表达式。这些表达式表明浑水水流尾流函数是相对深度和摩阻速度的函数。探讨分析了尾流函数的空间分布和潮周期过程。非恒定流的水流尾流函数项的准确表达,对于揭示含沙水流流速结构及水、沙相影响作用规律将起到启发和推动作用。     

珠江口伶仃洋锋的类别及其对沉积的影响

根据近年在珠江口伶仃洋的观测资料，对比国外有关河口锋的定义，归纳了伶仃洋内几种锋的现象，计有潮侵锋、岬角锋及湖水退急时的浅滩锋等。解释了锋生的原因与潮汐进退，特别与随潮入侵的咸水关系。文中也探讨了这些锋对沉积环境的影响，认为它是陆架水入侵河口地区的一种不容忽视的沉积动力过程。     

SOME ASPECTS OF THE INTERACTION OF BLOWING SNOW WITH THE ATMOSPHERIC BOUNDARY LAYER

Several possible effects of blowing snow on the atmospheric boundary layer are investigated, mostly within the general framework of the Prairie Blowing Snow Model (PBSM). The processes of snow saltation and suspension are first described. Variations to the drift density profile are tested and the effects of stratification and density variation calculations are evaluated. Despite high density gradients of blowing snow, stratification effects on turbulence and the velocity profiles can generally be neglected. However, with saltating or suspended snow in a constant shear stress layer, part of the shear stress is carried by the particles. A highly simplified, single-phase approach, based on the density variation of the air–snow mixture coupled to a simple turbulent stress–strain relationship, is used to illustrate this. Sublimation rates in a column of blowing snow are calculated using the PBSM and results are compared with those obtained with a modified formulation which incorporates a spectrum of sublimating particles of varying sizes at each height in a steady-state surface boundary layer and different specifications of the ventilation velocity.     

高压气藏不动管柱分层压裂工艺研究与应用

川西低渗高压气藏具有多层系的特点,层间距离一般在十至百米左右。为了提高气井产量与开采经济效益,鉴于气井加砂压裂后压井会严重伤害储层,影响压裂效果,采用压裂管柱直接作为生产管柱,研究形成了以FCY211及Y241封隔器不同组合的两层不动管柱分层压裂工艺。同时,在成熟的两层分压工艺基础上,结合投球选压工艺,研究形成了以“工具分层＋投球选压”不动管柱三层分层的压裂工艺。现场应用实践表明,分层压裂极大地增加了单井的产能,取得了明显经济效益,对类似气藏的多层压裂与开采提供了有益参考。     

Controls on reservoir heterogeneity of tight sand oil reservoirs in Upper Triassic Yanchang Formation in Longdong Area,southwest Ordos Basin,China: Implications for reservoir quality prediction and oil accumulation

Compared to conventional reservoirs, pore structure and diagenetic alterations of unconventional tight sand oil reservoirs are highly heterogeneous. The Upper Triassic Yanchang Formation is a major tight-oil-bearing formation in the Ordos Basin, providing an opportunity to study the factors that control reservoir heterogeneity and the heterogeneity of oil accumulation in tight oil sandstones.The Chang 8 tight oil sandstone in the study area is comprised of fine-to medium-grained, moderately to well-sorted lithic arkose and feldspathic litharenite. The reservoir quality is extremely heterogeneous due to large heterogeneities in the depositional facies, pore structures and diagenetic alterations. Small throat size is believed to be responsible for the ultra-low permeability in tight oil reservoirs. Most reservoirs with good reservoir quality, larger pore-throat size, lower pore-throat radius ratio and well pore connectivity were deposited in high-energy environments, such as distributary channels and mouth bars. For a given depositional facies, reservoir quality varies with the bedding structures. Massive- or parallel-bedded sandstones are more favorable for the development of porosity and permeability sweet zones for oil charging and accumulation than cross-bedded sandstones.Authigenic chlorite rim cementation and dissolution of unstable detrital grains are two major diagenetic processes that preserve porosity and permeability sweet zones in oil-bearing intervals. Nevertheless, chlorite rims cannot effectively preserve porosity-permeability when the chlorite content is greater than a threshold value of 7%, and compaction played a minor role in porosity destruction in the situation. Intensive cementation of pore-lining chlorites significantly reduces reservoir permeability by obstructing the pore-throats and reducing their connectivity. Stratigraphically, sandstones within 1 m from adjacent sandstone-mudstone contacts are usually tightly cemented (carbonate cement > 10%) with low porosity and permeability (lower than 10% and 0.1 mD, respectively). The carbonate cement most likely originates from external sources, probably derived from the surrounding mudstone. Most late carbonate cements filled the previously dissolved intra-feldspar pores and the residual intergranular pores, and finally formed the tight reservoirs.The petrophysical properties significantly control the fluid flow capability and the oil charging/accumulation capability of the Chang 8 tight sandstones. Oil layers usually have oil saturation greater than 40%. A pore-throat radius of less than 0.4 μm is not effective for producible oil to flow, and the cut off of porosity and permeability for the net pay are 7% and 0.1 mD, respectively.