Scaling the Vertical Structure of Sea Breezes

This analysis presents a new set of scalings for sea-breeze circulations. The scales are based on surface-layer turbulent fluxes of sensible heat and momentum, thus avoiding the use of exchange coefficients. Nondimensionalization of the governing equations, using the new scales, results in four dimensionless governing parameters, two of which are new. A data set consisting of 36 profiles of atmospheric variables during pure sea-breeze circulations is presented. The data are used to generate scaling laws for dimensionless sea-breeze depth and strength in the form of products of powers of the governing dimensionless parameters. These scaling laws are used to nondimensionalize individual velocity profiles, which are composited to present a universal dimensionless sea-breeze velocity profile. The scaling laws, applied as a diagnostic scheme, are used to investigate the diurnal evolution of the depth and strength of sea breezes.     

基于地心坐标系的卫星导航测风平滑算法

本文从高空风探测原理出发,提出可业务化运行的卫星导航探空系统高空风平滑计算方法。该算法首先根据北斗〖CD*2〗GPS（Global Positioning System）双模式探空仪提供的大地坐标秒间隔数据,基于地心坐标系计算原始高空风;然后,采用矢量滑动平均法对原始数据进行平滑处理。通过与同球施放的芬兰RS92探空系统做比对分析得出,滑动平均窗口在0～32 km高度范围内设置为34 s、在32 km高度以上设置为60 s条件下,卫星导航探空系统与RS92探空系统高空风测量结果吻合较好。该算法计算结果同基于站心坐标系计算的30 s滑动平均风基本相同,但其风速分量误差范围在32 km高度以下略优、在32 km高度以上减小明显,升空全程误差范围更为稳定。     

Intercomparison of stratospheric water vapor profiles obtained during the Balloon Intercomparison Campaign

The Balloon Intercomparison Campaign (BIC) was set up to intercompare remote sensing measurements of a number of compounds other than water vapor; however, water vapor has strong absorption features throughout the infrared and mm wave regions of the spectrum. Therefore many of the investigators involved in BIC have absorption or emission features due to water vapor in the data they obtained during the balloon flights made under the campaign. These features have been used by the investigators to determine the stratospheric water vapor profiles which are compared in this paper. The profiles allow comparison of a wide range of remote sensing techniques involving both emission and absorption in the mid-infrared and emission techniques in the far infrared.     

Near Wall Flow over Urban-like Roughness

In this study, comprehensive measurements over a number of urban-type surfaces with the same area density of 25% have been performed in a wind tunnel. The experiments were conducted at a free stream velocity of 10 m s^-1 and the main instrumentation was 120 ° x-wire anemometry, but measurement accuracy was checked using laser Doppler anemometry.The results haveconfirmed the strong three-dimensionalityof the turbulent flow inthe roughness sublayer and the depths of the inertial sublayer (log-law region) and roughness sublayer for each surface have been determined. Spatial averaging has been used to remove the variability of the flow in the roughness sublayer due to individual obstacles and it is shown that the spatially averaged mean velocity in the inertial sublayer and roughness sublayer can,together, be described by a single log-law with a mean zero-plane displacement and roughness length for the surface, provided that the proper surface stress is known. The spatially averaged shear stresses in the inertial sublayer and roughness sublayer are compared with the surface stress deduced from form drag measurements on the roughness elements themselves.The dispersive stress arising from the spatial inhomogeneity in the mean flow profiles was deduced from the data and is shown to be negligible compared with the usual Reynolds stresses in the roughness sublayer. Comparisons have been made between a homogeneous (regular element array) surface and one consisting of random height elements of the same total volume. Although the upper limits of the inertial sublayer for both surfaces were almost identical at equivalent fetch, the roughness sublayer was much thicker for the random surface than for the uniform surface, the friction velocity and the roughness length were significantly larger and the `roughness efficiency' was greater. It is argued that the inertial sublayer may not exist at all in some of the more extreme rough urban areas. These results will provide fundamental information for modelling urban air quality and forecasting urban wind climates.     

城市地铁变形监测数据处理

为确保地铁施工安全进行变形监测是非常重要的手段,而变形监测的最终目的是预测,即对观测物的未来形态进行预报和分析。时间序列的原理是找出事物随时间变化的规律,从而对数据变化趋势做出正确的分析和预报。本文通过对时间序列的研究对长春地铁繁荣路站的变形监测数据进行了分析和预报。     

基于遥感数据的多年平均物候不确定性研究

多年平均物候能够反映植被生长发育节律的均衡状态,是植被物候模拟与预测的关键参数之一。遥感已广泛用于地表物候监测,是空间多年平均物候信息的重要来源。然而,基于遥感的多年平均物候存在不同计算方法,如先确定每年时序曲线的物候点再求平均值（平均法）,以及先求多年平均时序曲线再确定物候点（参考曲线法）。上述方法的结果可能存在差异,但目前尚缺乏对这一不确定性及其影响的认识。针对该问题,本研究利用2001年—2016年遥感植被指数数据,分别在平均法和参考曲线法下提取中国森林生长季起始时间的多年平均值（■）,比较■的差异（■）及其空间异质性;进一步选取物候研究中常用指标,即以■为基础的温度“季前时长PD (Preseason Duration)”,分析■不同计算方法对物候—气候关系的潜在影响。结果表明,（1）不同方法下的■差异显著,总体上平均法小于参考曲线法（-2.6±2.2 d,占88%）,其中存在8.0%和6.0%的有效像元其动态平均法和固定平均法小于参考曲线法超过7 d,主要分布在东南丘陵地区。（2）■具有显著的空间异质性,主要表现为随年均温的升高而减小（Slope=0.07 d/℃,P<...     

不规则边界场地中方格法土方工程量的计算

结合方格法计算土方工程量的全过程,介绍了一种不同于传统教材的确定高程权的方法。采用该方法,比较好地解决了不规则边界场地采用方格法计算土方量的难题,对该方法的实际应用具有指导意义。     

逐点内插法建立DEM的研究

本文讨论了移动拟合法和加权平均法两种逐点内插法建立DEM的原理及算法实现,并对其中的关键技术——动态确定阈值R和权函数的确定与实现进行了详细讨论。文章在分析常规权函数的基础上提出了一种新的定权方法。最后通过大量试验数据对两种内插方法的精度以及不同权函数的精度分别进行了评定。     

TIN DEM线性内插不确定性的随机过程模型

基于随机过程模型导出了TIN DEM线性内插的随机过程模型,给出了不规则随机空间三角形的不确定性描述,讨论了TIN节点误差在线性内插中的传播问题。通过理论推导和实际算例,得到了TIN DEM线性内插点的点位方差和误差椭球半轴的解析表达式、线性内插精度最高点坐标的解析表达式,该结论与三角形的形状无关;对DEM线性外推导致精度急剧下降的必然性结论进行了理论证明;得到TIN线性内插的平均点位方差解析式,从理论上说明了本文结论的有效性。