Empirical predictors of annual bed load travel distance,and implications for salmonid habitat restoration and protection

Measurements of annual travel distance (L_b) of bed load sediment at 16 locations in Alaska, the intermountain USA, west coast USA and Scotland are strongly correlated with bankfull channel width (r² = 0·86, p < 0·001). Travel distance of particles is probably limited by trapping in bars, which have a longitudinal spacing proportional to channel width. Increased abundance of woody debris reduces bar spacing and may reduce L_b. Longer cumulative duration of bed load transporting flows in a year appears to increase L_b. Other predictors of annual travel distance such as stream power per unit length, drainage area and bankfull discharge were less well correlated with L_b (r² ranging from 0·27 to 0·51). Stream power per unit bed area, basal shear stress and slope were not significantly related to L_b (r² < 0·05). Most correlations were improved when regressions were limited to data from the west coast USA. Travel distance estimates can be used to help identify reaches that may take longer to recover from large, short‐term increases in sediment supply. Published in 2001 by John Wiley & Sons, Ltd.     

Determining short-term changes in the hydraulic properties of a sandy-loam soil by a three-run infiltration experiment

ABSTRACT

Soil structure-dependent parameters can vary rapidly as a consequence of perturbing events such as intense rainfall. Investigating their short-term changes is therefore essential to understand the general behaviour of a porous medium. The aim of this study is to gain insight into the effects of wetting, perturbation and recovery processes through different sequences of Beerkan infiltration experiments performed on a sandy-loam soil. Two different three-run infiltration experiments (LHL and LLL) were carried out by pouring water at low (L, non-perturbing) and high (H, perturbing) heights above the soil surface and at short time intervals (hours, days). The results demonstrate that the proposed method allows one to capture short-term variations in soil structure-dependent parameters. The developed methodology is expected to simplify the parameterization of hydrological models with temporally variable soil hydraulic properties.     

The Near-Earth Asteroid Size-Frequency Distribution: A Snapshot of the Lunar Impactor Size-Frequency Distribution

It is shown that the size-frequency distribution (SFD) of a time-averaged projectile population derived from the lunar crater SFD of Neukum and Ivanov (in Hazards Due to Comets and Asteroids (T. Gehrels, Ed.), 1994, pp. 359-416, Univ. of Arizona Press, Tucson) provides a convincing fit to the SFD of the current near-Earth asteroid (NEA) population, as deduced from the results of asteroid search programs. Our results suggest that the shape of the SFD of the impactor flux has remained in a steady state since the late heavy bombardment, so that the current NEA population can be viewed as a snapshot of the flux of impactors on the Moon. The number of bodies in the projectile population with diameters of 1 km or more is 700±130, which is in good agreement with recent estimates of the total number of NEAs in this size range. Our results imply that the contribution to the projectile flux from comets is small for diameters below 10 km.     

Multiple Parameter Regularization: Numerical Solutions and Applications to the Determination of Geopotential from Precise Satellite Orbits

Kaula’s rule of thumb has been used in producing geopotential models from space geodetic measurements, including the most recent models from satellite gravity missions CHAMP. Although Xu and Rummel (Manuscr Geod 20 8–20, 1994b) suggested an alternative regularization method by introducing a number of regularization parameters, no numerical tests have ever been conducted. We have compared four methods of regularization for the determination of geopotential from precise orbits of COSMIC satellites through simulations, which include Kaula’s rule of thumb, one parameter regularization and its iterative version, and multiple parameter regularization. The simulation results show that the four methods can indeed produce good gravitational models from the precise orbits of centimetre level. The three regularization methods perform much better than Kaula’s rule of thumb by a factor of 6.4 on average beyond spherical harmonic degree 5 and by a factor of 10.2 for the spherical harmonic degrees from 8 to 14 in terms of degree variations of root mean squared errors. The maximum componentwise improvement in the root mean squared error can be up to a factor of 60. The simplest version of regularization by multiplying a positive scalar with a unit matrix is sufficient to better determine the geopotential model. Although multiple parameter regularization is theoretically attractive and can indeed eliminate unnecessary regularization for some of the harmonic coefficients, we found that it only improved its one parameter version marginally in this COSMIC example in terms of the mean squared error.     

EGM96/2008重力场模型在似大地水准面构建中的应用

似大地水准面的构建可以将GPS测量的高程迅速转化为正常高,极大降低高程测量的成本,提高相关工作效率。将EGM96/2008重力场模型与“移去-恢复”法相结合,在矿区内建立似大地水准面,并使用不同的插值方法,验证最优方案。结果表明,使用二次线性插值的EGM2008重力场模型拟合效果更好,模型外符合精度达到3.6 mm,更适合应用于该区域似大地水准面构建。     

南京九华山铜矿伴生金的赋存状态及分布规律

九华山铜矿床中伴生金已具综合利用价值。金以矿物态为主,金矿物主要为银金矿、含银自然金。金矿物粒度较细,大于２００目者占２４．３４％,金矿物主要嵌布于黄铜矿粒间或裂隙中。金的理想回收率为６６．３０％,空间分布上,沿矿体走向金西低东高,倾向金北高南低,深度金随深度增加而增加。     

Further discussion on the intercomparison of the trace metal concentrations and particle size of fluvial sediment recovered from two centrifuge systems

A single large volume water sample taken at the mouth of the Upper Rhone River on Lake Geneva was processed directly in parallel through two continuous flow centrifuges, a Westphalia and an Alfa-Laval. Sediment was recovered from the Westphalia, and separately from the bowl and brass core of the Alfa-Laval. The three sediment samples were analyzed for particle size and the following elements: Zn, Cu, Mn, Cr, P, Co, B, V, Be, Sr, Na, Pb, Ni, Ba, Fe, Ca, and Mg. Results indicate that the particle size recovery of both machines is similar when sediment from the brass core and bowl of the Alfa-Laval are combined, and that the recovery for all elements other than Cu, V, B, and Pb are the same when the particle size differences are taken into account. Sediment from the Alfa-Laval brass core is clearly contaminated by Cu, B and is also elevated in V and Pb but not to a significant extent. The sediment recovered from the bowl of the Alfa-Laval is contaminated only with Cu, with a 10 ppm increase over the 52 ppm recovered in the Westphalia sediment. Operating procedures involve the discarding of the brass core sediment and the mixing of the Alfa-Laval bowl sediment with that from the Westphalia. The consequent increase in Cu is estimated at less than 5 ppm or within the confidence level of the analysis. These procedures are recommended to all operators of non modified Alfa-Laval units.     

Results based management in fisheries: Delegating responsibility to resource users

While the notion of results based management has been devoted recent attention in the context of reforming European fisheries management, it remains unclear what it entails. A conceptual model of results based management in fisheries is proposed as a way for public authorities to delegate specific management and documentation responsibilities to resource users. The model comprises three defining features: (1) That authorities define measurable objectives for the utilization of fisheries resources; (2) that resource users are made responsible for achieving these objectives and for (3) providing documentation that allows for an audit of the extent to which they are met. Selected cases are used to illustrate these features. Rationales and prospects of introducing results based management as an alternative in a European fisheries management context are discussed, giving consideration to how it may be pursued under the reformed common fisheries policy.