An analytical study on three‐dimensional versus two‐dimensional water table‐induced flow patterns in a Tóthian basin

Although it has been increasingly acknowledged that groundwater flow pattern is complicated in the three‐dimensional (3‐D) domain, two‐dimensional (2‐D) water table‐induced flow models are still widely used to delineate basin‐scale groundwater circulation. However, the validity of 2‐D cross‐sectional flow field induced by water table has been seldom examined. Here, we derive the analytical solution of 3‐D water table‐induced hydraulic head in a Tóthian basin and then examine the validity of 2‐D cross‐sectional models by comparing the flow fields of selected cross sections calculated by the 2‐D cross‐sectional model with those by the 3‐D model, which represents the “true” cases. For cross sections in the recharge or discharge area of the 3‐D basin, even if head difference is not significant, the 2‐D cross‐sectional models result in flow patterns absolutely different from the true ones. For the cross section following the principal direction of groundwater flow, although 2‐D cross‐sectional models would overestimate the penetrating depth of local flow systems and underestimate the recharge/discharge flux, the flow pattern from the cross‐sectional model is similar to the true one and could be close enough to the true one by adjusting the decay exponent and anisotropy ratio of permeability. Consequently, to determine whether a 2‐D cross‐sectional model is applicable, a comparison of hydraulic head difference between 2‐D and 3‐D solutions is not enough. Instead, the similarity of flow pattern should be considered to determine whether a cross‐sectional model is applicable. This study improves understanding of groundwater flow induced by more natural water table undulations in the 3‐D domain and the limitations of 2‐D models accounting for cross‐sectional water table undulation only.     

Discussion on applying an analytical method to optimize the anti-freeze design parameters for underground water pipelines in seasonally frozen areas

Adopting the quasi-three-dimensional (Quasi-3D) numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe conveyance distance (SCD) of a water pipeline and six influencing factors are established based on the lowest water temperature (LWT) along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration (MFP) instead of the mean annual ground surface temperature (MAGST) and soil water content (SWC) to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is established based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters: the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.     

An Analytical Solution for Dynamic Response of the Plate with Different Impedances Subjected to Underwater Explosion

In this paper, the transmitted part of the incident wave is considered to revise Taylor’s solution, which is used to extend its application for analytical models to predict the response of the plate with different material properties. The influence of the material properties and the boundary condition of the plate on fluid and structural dynamics is systematically investigated. The analytical results are compared with those of detailed dynamic FE simulations and the two are in good agreement. The results indicate that the analytical method is valid and suitable for the plates with different material properties subjected to underwater explosion. It is found that Taylor’s results of the plate with small impedance are invalid, which indicates a potential application field for the analytical method.     

Effect of Groundwater Fluctuations on Pore Pressures and Earth Pressures on Coastal Excavation Retaining Walls

Pore water and earth pressures acting on retaining structures are investigated using an efficient coastal double-layered excavation model to determine offshore excavation responses to groundwater fluctuations outside foundation pits. Total pore water pressure includes excess pore water pressure (due to groundwater fluctuations) and steady pore water pressure (due to steady seepage) determined using one-dimensional consolidation theory of double-layered soil and one-dimensional steady-state flow theory, respectively. Rankine's active and passive earth pressures are obtained from pore water pressure. This method is applicable to arbitrary groundwater fluctuation conditions. How physical parameters affect pore water pressure is numerically investigated using examples, demonstrating the method's practicality for calculating pore water and earth pressures.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Modelling tropical cyclone risks for present and future climate change scenarios using geospatial techniques

Tropical cyclones and their devastating impacts are of great concern to coastal communities globally. An appropriate approach integrating climate change scenarios at local scales is essential for producing detailed risk models to support cyclone mitigation measures. This study developed a simple cyclone risk-modelling approach under present and future climate change scenarios using geospatial techniques at local scales, and tested using a case study in Sarankhola Upazila from coastal Bangladesh. Linear storm-surge models were developed up to 100-year return periods. A local sea level rise scenario of 0.34?m for the year 2050 was integrated with surge models to assess the climate change impact. The resultant storm-surge models were used in the risk-modelling procedures. The developed risk models successfully identified the spatial extent and levels of risk that match with actual extent and levels within an acceptable limit of deviation. The result showed that cyclone risk areas increased with the increase of return period. The study also revealed that climate change scenario intensified the cyclone risk area by 5–10% in every return period. The findings indicate this approach has the potential to model cyclone risk in other similar coastal environments for developing mitigation plans and strategies.     

成层软土地基预固结处理后桩基水平承载力估算方法

目前通过对软土地基预加固处理来提高桩基水平承载力已被工程界认可,但如何在工程前期设计过程中估算软土地基预处理后桩基水平承载力提高值仍是技术难点。基于此,参考Bowles[1]的地基土水平抗力计算式,同时考虑成层软土地基预排水固结处理影响,通过数学推导,推求出根据原状软土室内土工试验抗剪强度指标及预加固处理时间,估算软土地基预处理后桩基水平承载力提高值的实用计算方法。考虑桩侧土弹塑性屈服影响,推导出成层软土中水平受荷桩弹塑性解析解及塑性区深度的计算式,给出了桩顶水平位移、桩身最大弯矩的无量纲计算式及相关计算源代码。依托于浙江省某水闸桩基工程案例,根据提出的计算方法对桩基水平承载力、桩顶水平位移及桩身最大弯矩等性状进行预估计算,并与地基预处理前、后现场试桩检测值进行验证对比,认为桩基水平承载力、桩顶水平位移及桩身最大弯矩等预估计算成果与工程现场试桩的检测值较接近,对类似工程设计具有较好的参考价值。     

冲-洪积平原1:5万区域地质调查技术方法探索

首都地区规划建设工作主要分布于平原松散地层之上,第四纪地质研究显得尤为重要。依托近几年来在北京地区开展的平原覆盖区1:5万区域地质调查和活动断裂专项调查项目成果,系统总结了平原区第四纪区域地质调查与评价的主要工作手段和技术方法,及其在解决第四纪基础地质问题及生态环境中所起的作用。通过平原区区域地质调查工作,可查明第四纪精细地质结构、含水层分布特征,精确厘定活动断裂位置及其活动时限,探讨自然环境演化序列与人类活动关系等,为城市规划、重大工程建设和应急水源地水资源合理开采提供基础地学数据。研究成果对首都城市减灾防灾、生态环境演变研究具有重要地学支撑作用。     

A Review of Atmospheric Electricity Research in China from 2011 to 2018

Atmospheric electricity research has been conducted actively in China, having profited from the development and application of high temporal and spatial resolution lightning detection and location technologies. This paper reviews the scientific advances made in the field of atmospheric electricity in China from 2011 to 2018, covering the following five aspects:(1)lightning detection and location techniques;(2) discharge processes and parameters associated with rocket-triggered lightning;(3) physical processes in natural lightning and attachment to the ground;(4) lightning activities and charge structure in different thunderstorms; and(5) effects of thunderstorms on the upper atmosphere. In addition, some outstanding questions for future research are outlined.     

酸溶法测定硫铁矿中的全硫

在野外地质队实验室仪器少的条件下,用酸溶的方法分析硫铁矿中全硫,简单、快速、易操作,取得良好的结果。