Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.     

长山群岛海区春季水温垂直结构分析

利用海军大连舰艇学院2006年4月长山群岛海区的CTD调查资料,系统分析了该季节长山群岛海区的温度垂直结构,并探讨了其形成机理。分析指出:4月上、中旬是长山群岛海区季节性温跃层的生成期,群岛东侧和南侧边缘受黄海冷水团形成过程的影响,温跃层的出现概率和跃层强度都远远高于群岛内部;在生成时机上,群岛东侧和南侧边缘海域早于群岛内部水域。中间层和底层海水温度的垂直结构与海流有着很好的相关性,在海洋平流的作用下,海区会产生正跃层、逆跃层、冷中间层、暖中间层等复杂的温度垂直结构。上层海水温度结构主要受海面风场和气温的影响,较强的热辐射和充分的风力搅拌能够加速温跃层的生成。     

The role of water mass dynamics in controlling bacterial abundance and production in the middle Adriatic Sea

Month-to-month fluctuations in the abundance of bacteria and heterotrophic nanoflagellates (HNF) and bacterial production, as well as various chemical (nutrients, oxygen) and physical (salinity, temperature) parameters were analysed at a station located in the open middle Adriatic Sea during one decade (1997-2006). Being influenced by both coastal waters and open Adriatic circulation in the surface layer, and by the deep Adriatic water masses in the deep layers (100 m), this station is quite suitable for detecting the environmental changes occurring in the open Adriatic Sea with respect to the circulation of its water masses and their long-term changes and anomalies. Multivariate methods were used to identify seasonal and inter-annual changes of the investigated parameters, associating observed changes to the changes in Adriatic water masses and circulation regimes. The analyses showed that bacterial abundance and production were controlled by different water mass dynamics during 1997-2001 compared to 2002-2006 period, particularly noticeable in different seasonal patterns of biological parameters. The interplay between North Adriatic Dense Water (NAdDW) and Levantine Intermediate Water (LIW) resulted in a change in the available nutrients (NAdDW is poor in orthophosphates), and as a consequence different bacterial abundance and production. A few periods were examined in detail, such as 2004, when LIW inflow was particularly strong and was accompanied by an increase of bacterial and HNF abundances, as well as of bacterial production.     

High resolution micromill sampling for analysis of fish otoliths by ICP-MS: effects of sampling and specimen preparation on trace element fingerprints

Otoliths are calcified structures in the head of fish that record environmental information about fish's life history. Gathering the elemental information from the core of an otolith corresponding to the juvenile period of fish's life is critical to discriminate the adult fish to their natal habitats reliably. A high resolution micromill has been used to isolate the otolith core from a whole otolith for elemental analysis. The effects of micromilling procedures (e.g., sectioning, embedding and drilling) on contamination to otolith trace element levels were examined using paired blackfin tuna (Thunnus atlanticus) otoliths. Otoliths were decontaminated by dilute hydrogen peroxide and nitric acid throughout to remove surface contamination. A preconcentration procedure was used to determine the trace elements from the small core material by ICP-MS. It was found that micromilling procedures introduce significant contamination to otoliths, especially for Al, Cu, Pb and Zn. The sectioning procedure caused significant contamination for Co and Cu, while the embedding procedure resulted in contamination for nearly all trace elements (Al, Cd, Co, Cu, Ga, Mn, Ni, Pb, V and Zn). The combined sectioning, embedding and drilling procedure also resulted in contamination for most trace elements. Despite the contamination across all procedural steps, the decontamination procedure effectively removed the surface contamination with the exception of Pb and Zn. Bias (e.g., residual contamination) on Pb was small in comparison to overall concentration of Pb expected to occur in fish otoliths, therefore, its effect may be minor in discriminating individuals. Bias on Zn was larger that could limit its application in discriminating individuals.     

Analytical convolution model for shipping water evolution on a fixed structure

The shipping of water is a problem that affects naval and offshore structures. Estimating its propagation on the decks of these structures by using analytical methods has been a main concern of projects. However, classical approaches disregard the decay tendency of water elevation time series and tend to overestimate the resultant water on deck. This paper is concerned with estimating the evolution of water along the deck of a fixed structure due to shipping water events. An analytical convolution model is proposed to estimate water elevations. The model considers the freeboard exceedance time series and the mean shipping flow velocity as inputs and the frictional effects of the bottom by resistance coefficients, which enables an approximated representation of the water elevation time series over the deck. It was validated with experiments of isolated shipping water events that were generated with the wet dam-break approach. The results obtained with the proposed model captured the experimental results, approximating the peak values and the decay trend of time series. Improvement of the proposed approach over classical models to represent shipping water elevations was demonstrated by comparing the results obtained with those of the dam-break model of Stoker.     

Wedge impact with the influence of ice

This work presents a canonical study on a wedge entering water near a single piece of ice using computational-fluid-dynamics (CFD) and a Wagner-type theoretical model with corrections for non-linear effects. Calculations for a series of conditions with ice of different sizes and locations relative to the wedge are conducted. The hydrodynamic force due to impact, the pressure distribution on the wedge surface, and the pile-up phenomenon are examined to study the role of ice in the impact process. The theoretical model is shown to be accurate and can serve as a useful method to assess slamming loads under the influence of ice. It is shown that even for the case of a small piece of ice, the slamming force on the wedge can increase by 30%.     

Implementation of European marine policy: New water quality targets for German Baltic waters

A full re-calculation of Water Framework Directive reference and target concentrations for German coastal waters and the western Baltic Sea is presented, which includes a harmonization with HELCOM Baltic Sea Action Plan (BSAP) targets. Further, maximum allowable nutrient inputs (MAI) and target concentrations in rivers for the German Baltic catchments are suggested. For this purpose a spatially coupled, large scale and integrative modeling approach is used, which links the river basin flux model MONERIS to ERGOM-MOM, a three-dimensional ecosystem model of the Baltic Sea. The years around 1880 are considered as reference conditions reflecting a high ecological status and are reconstructed and simulated with the model system. Alternative approaches are briefly described, as well. For every WFD water body and the open sea, target concentrations for nitrogen and phosphorus compounds as well as chlorophyll a are provided by adding 50% to the reference concentrations. In general, the targets are less strict for coastal waters and slightly stricter for the sea (e.g. 1.2 mg/m³ chl.a summer average for the Bay of Mecklenburg), compared to current values. By taking into account the specifics of every water body, this approach overcomes the inconsistencies of earlier approaches. Our targets are well in agreement with the BSAP targets, but provide spatially refined and extended results. The full data are presented in Appendix A1 and A2.To reach the targets, German nitrogen inputs have to be reduced by 34%. Likely average maximum allowable concentrations in German Baltic rivers are between 2.6 and 3.1 mg N/l. However, the concrete value depends on the scenario and uncertainties with respect to atmospheric deposition. To our results, MAI according to the BSAP may be sufficient for the open sea, but are not sufficient to reach a good WFD status in German coastal waters.     

青岛冷水团的消亡机理研究

本文基于多年月平均水温资料,分析了青岛冷水团的长消过程,并利用气候态月平均大气数据和数值模拟结果,探讨了青岛冷水团的消亡机理。结果表明,青岛冷水团3月出现,4月成型,5月最盛,6月减弱,7月消失;南黄海6-7月间偏南风的增强和温跃层以下反气旋涡的减弱是青岛冷水团消亡的动力机制,而海面净热通量的下传和水平热量的输入则是青岛冷水团消亡的热力机制。     

Southwestward intrusion of korea strait bottom cold water observed in 2003 and 2004

Hydrographic surveys were carried out four times in the western channel of the Korea Strait in March and August 2003 and in June and November 2004. The bottom cold water, which was lower than 10°C, appeared in the channel trough except in March 2003. It flowed southwestward along the shelf of Korean coasts in August 2003 and in November 2004. The width and the maximum speed of the intrusion current were about 20 km and approximately 25 cm s^-1, respectively, off Ulsan, Korea. The volume transport of the bottom cold water was estimated 0.019 Sv (Sv≡10⁶ m³ s^-1) in August 2003 and 0.026 Sv in November 2004.     

Wave reflection from partially perforated-wall caisson breakwater

In 1995, Suh and Park developed a numerical model that computes the reflection of regular waves from a fully perforated-wall caisson breakwater. This paper describes how to apply this model to a partially perforated-wall caisson and irregular waves. To examine the performance of the model, existing experimental data are used for regular waves, while a laboratory experiment is conducted in this study for irregular waves. The numerical model based on a linear wave theory tends to over-predict the reflection coefficient of regular waves as the wave nonlinearity increases, but such an over-prediction is not observed in the case of irregular waves. For both regular and irregular waves, the numerical model slightly over- and under-predicts the reflection coefficients at larger and smaller values, respectively, because the model neglects the evanescent waves near the breakwater.