数字化测绘技术在公路改扩建中的应用

主要对现有公路改扩建中的数字化勘测及数字化设计进行了探讨,首先概述了湖南梅城公路改扩建项目背景,然后对数字摄影测量、GPS-RTK三维路基数据获取以及数字路基模型及与地面模型叠加等方面进行了论述,最后指出了生成1:2000三维数字地形图用于纸上定线和建立数字地面模型,能够达到公路改扩建带状图绘测精度的要求。     

Nanpanjiang basin: A window on the tectonic development of south China during Triassic assembly of the southeastern and eastern Asia

As the largest siliciclastic sink in the South China block, the Triassic Nanpanjiang basin is generally thought of as a foreland basin related to Indosinian collision between the South China and Indochina blocks. Our basin analysis, spanning an eight years period, provides details of Lopingian to Middle Triassic stratigraphic fill and tectonic subsidence of the basin. Field observation and sedimentological analyses reveal that the basin was not filled by a monotonous turbidite system and suggest instead the development of five primary depositional units constituted by deep-water turbidite systems, mass-transport deposits, condensed drapes, shallow-water isolated carbonate platforms, and volcano-volcaniclastic rocks. The stratigraphic completeness of the basin, the coexistence of widespread but localized carbonate platforms within axially filled deep-water basin, tectonically generated cyclothems of transverse mass-transport deposits along intrabasinal faults and basin fill of extrusive rocks of bimodal composition together apparently call in question the claim that crustal shortening prevailed during the Late Permian to pre-Norian Triassic. Patterns of basin fill, differential tectonic subsidence and very high subsidence rate of the region adjacent to master fault are more closely match the pattern expected for extensional to transtensional basin in a back-arc setting. The crustal extension in the southwestern South China was not consistent with hypothesized Indosinian collision between South China and Indochina blocks, but more likely developed in response to northwestward subduction of the paleo-Pacific plate. Our results, combined with regional considerations, lead to a new model for the Triassic tectonic evolution of South China during Triassic assembly of the southeastern and eastern Asia.     

南海成因及其演化模式探讨

尽管南海已进行深入的调查与研究,提出多种成因模型,包括挤出模型、弧后扩张模型、古南海俯冲拖曳模型等,但因其所处构造位置特殊,周边构造环境经历了复杂的改造,所有成因模式均未能得到广泛的认可。本文从三大板块相互作用入手,结合南海实测数据,提出南海形成的弧后扩张—左旋剪切模型。认为南海是古南海往北俯冲的弧后盆地,菲律宾海板块往北漂移形成的大规模左旋走滑是南海扩张的触发因素。印度—欧亚碰撞产生中南半岛挤出主要影响西南海盆扩张方向,使得扩张轴从近东西向转为北东向。南海及邻区晚中生代以来的演化可以分为以下阶段：1）早白垩世开始澳大利亚板块往北漂移,新特提斯洋往北俯冲消亡,导致弧后扩张,形成古南海;2）晚白垩世末—始新世,古南海往北俯冲,导致弧后拉张形成陆缘裂谷;3）早渐新世,受菲律宾海板块西缘大型左旋走滑影响,在原有裂谷的基础上从东往西海底扩张,形成南海;4）渐新世末,受俯冲后撤的影响,扩张中心往南跃迁,同时受西缘断裂左旋活动的影响,扩张轴从近东西西逐步转为北东向;5）早中新世晚期,南沙地块—北巴拉望地块与卡加延脊碰撞,南海扩张停止。     

喀喇昆仑地体甜水海地区102Ma辉长岩的发现及其对区域中生代构造演化的约束

喀喇昆仑地体是青藏高原的重要构造单元。近来,我们对其中的林济塘中生代盆地地层进行了调查,并在喀喇昆仑地体甜水海地区褶皱的中侏罗统龙山组灰岩中发现了辉长岩侵入体。辉长岩具有高Al2O3(15.07%~15.32%)与TiO2(1.31%~1.34%)、贫P2O5(0.19%~0.21%)和低碱(Na2O+K2O=3.49%~3.72%)的特征,明显富集轻稀土(La/Yb=6.17~7.39),富集Th、La、Nd与Tb,亏损Rb、Sr、P与Y,辉长岩Sr-Nd同位素表现出富集的特征(εNd(t)值分别为-5.8与-5.9)。LA-ICP-MS锆石U-Pb测年结果显示辉长岩岩浆锆石206Pb/238U年龄为102±1Ma(MSWD=0.92;n=14),指示岩体形成于早白垩世晚期。辉长岩中含有大量继承锆石,38颗继承锆石年龄分布在2450~232Ma之间,其中16颗为前寒武纪年龄锆石,意味着该地区可能存在前寒武纪基底。这些特征意味着辉长岩在形成的过程中经历壳源物质的强烈混染(Nb/U、Ta/U、Ce/Pb分别为26.6~29.1、1.69~1.76、9.72~11.3)。这种经历壳源物质的强烈混染岩浆的形成可能与软流圈上涌有关,即102Ma辉长岩形成时甜水海地区处于伸展背景。结合区域地质特征,指出102Ma时研究区进入新的伸展与海盆发育阶段,并建立了喀喇昆仑地体中生代三阶段构造演化模型,即侏罗纪-早白垩世早期的正常俯冲与弧盆演化、早白垩世的平板俯冲与造山阶段及晚白垩世的正常俯冲与弧盆演化。     

辽东铀成矿带连山关地区韧性剪切带与铀成矿作用

连山关地区位于华北克拉通北缘铀成矿省辽东铀成矿带,已知铀矿床（点）均发育在韧性剪切带附近。为了解韧性剪切带运动学、几何学构造变形机制及与铀矿的关系,本文以连山关岩体周缘韧性剪切带为研究对象,通过野外宏观调查和室内微观研究相结合的研究方法,探讨构造变形期次、韧性剪切带形成机理及其对铀成矿的控制作用。研究表明：连山关岩体周缘发育的韧性剪切带与近南北向挤压构造变形有关,其右行韧性剪切带应变类型为压扁应变,属于一般压缩-平面应变范围,Flinn指数K值在0.19~0.69之间,岩石类型属于S/SL型构造岩。研究区内铀矿体均为隐伏盲矿体,主要赋存于沿着连山关岩体和辽河群接触带右行剪切作用形成的背斜褶皱核部,和北东东向断裂关系密切。综合分析认为,连山关岩体南缘北西向韧性剪切带为一级控矿构造,是区内铀矿热液运移的通道,而剪切带边部的晚期北东东向断裂则是铀矿储存空间;铀源可能来自于太古宙古风化壳,并在大型韧性剪切活动（提供热液运移通道）和基性脉岩侵入（提供热源和还原剂）等综合因素作用下运移、富集成矿。     

北山造山带中部(甘肃段)花岗岩成因及构造背景

北山造山带中部花岗岩体以陶勒努图洪岩体和跃进山南岩体为代表,本文对这两个岩体进行了LA-ICP-MS锆石U-Pb定年、全岩地球化学和原位锆石Lu-Hf同位素分析,结果表明:岩体成岩年龄分别为410±2. 8Ma、427±2. 5Ma;主量元素呈现高硅、高钾钙碱性、准铝质-弱过铝质特征;微量元素表现为富集Th、Zr、Hf等及大离子亲石元素(Rb、U、K等),亏损Ba、Sr、Eu及高场强元素(Nb、Ta、P、Ti等);球粒陨石标准化稀土元素曲线呈轻稀土富集、重稀土亏损的右倾模式。综合分析认为跃进山南岩体属A型花岗岩,陶勒努图洪岩体属S型花岗岩。陶勒努图洪和跃进山岩体锆石ε_(Hf)(t)分别为-2. 90～-0. 12(平均值为-1. 53)、-1. 99～2. 82(平均值为0. 26),t_(DM2)分别为1. 41～1. 58Ga、1. 23～1. 54Ga。研究表明:陶勒努图洪黑云母花岗闪长岩岩浆源区主要为由元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质(含中基性岩石)部分熔融的产物,跃进山南二长花岗岩体可能在元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质重熔过程中有幔源岩浆的参与。在中志留世(427Ma)明水-小黄山洋已向南侧马鬃山-公婆泉弧之下俯冲至后期,板块后撤引发明水-旱山地体南缘弧后形成裂解环境导致幔源岩浆底侵,诱发地壳物质重熔形成花岗质岩浆,岩浆侵位形成跃进山南二长花岗岩体;至早泥盆世(410Ma),俯冲结束发生弧-陆碰撞造山导致地壳增厚,引发下地壳发生部分熔融产生的花岗质岩浆侵位形成陶勒努图洪岩体;两岩体是在早、晚古生代交接时段同一俯冲-碰撞构造背景下不同部位、不同亚构造环境下的产物。     

Mesozoic–Cenozoic stress field magnitude in Sichuan Basin,China and its adjacent areas and the implication on shale gas reservoir: Determination by acoustic emission in rocks

The Sichuan Basin is one of the vital basins in China, boasting abundant hydrocarbon reservoirs. To clarify the intensity of the tectonic stress field of different tectonic episodes since the Mesozoic and to identify the regional dynamic background of different tectonic movements in the Sichuan Basin and its adjacent areas, the characteristics of the acoustic emission in rocks in different strata of these areas were researched in this paper. Meanwhile, the tectonic stress magnitude in these areas since the Mesozoic was restored. The laws state that the tectonic stress varied with depth was revealed, followed by the discussion of the influence of structural stress intensity on structural patterns in different tectonic episodes. These were conducted based on the paleostress measurement by acoustic emission method and the inversion principle of the stress fields in ancient periods and the present, as well as previous research achievements. The results of this paper demonstrate that the third episode of Yanshanian Movement (Yanshanian III) had the maximum activity intensity and tremendously influenced the structural pattern in the study area. The maximum horizontal principal stress of Yanshanian III varied with depth as follows: 0.0168 x + 37.001 (MPa), R² = 0.8891. The regional structural fractures were mainly formed in Yanshanian III in Xujiahe Formation, west Sichuan Basin, of which the maximum paleoprincipal stress ranging from 85.1 MPa to 120.1 MPa. In addition, the law stating the present maximum horizontal principal stress varies with depth was determined to be 0.0159 x+10.221 (MPa), R²=0.7868 in Wuling Mountain area. Meanwhile, it was determined to be 0.0221 x+9.4733 (MPa), R²=0.9121 in the western part of Xuefeng Mountain area and 0.0174 x+10.247 (MPa), R²=0.8064 in the whole study area. These research results will not only provide data for the simulation of stress field, the evaluation of deformation degree, and the prediction of structural fractures, but also offer absolute geological scientific bases for the elevation of favorable shale gas preservation.     

地幔热导率的选取对动力学数值模拟的影响——以岩石圈张裂过程为例

目前存在有多种地幔热导率模型,不同模型在数值和随温压变化的特征上有明显的差异.为探究不同热导率模型对动力学数值模拟结果的影响,本文对不同模型下的岩石圈张裂过程进行模拟研究,探讨地幔热导率对岩石圈热传输、变形和熔融过程的影响及其作用机理.结果显示,不同热导率模型下,岩石圈的变形和熔融特征表现出明显差异.高热导率模型下,岩石圈破裂较晚,形成陆缘较为宽阔,地壳熔融强烈而地幔熔融较弱;低热导率模型下,岩石圈破裂较早,形成陆缘较为狭窄,地幔熔融强烈而地壳熔融较弱.这种差异源于不同地幔热导率下岩石圈和地幔热状态的变化及相应力学性质的改变.高热导率下,热传导的增温效应显著,岩石圈呈现较热的状态,其强度整体较低,壳幔耦合减弱;而低热导率下,热对流的增温效应显著,岩石圈呈较冷的状态,其强度整体较高,壳幔耦合增强.基于模拟结果,本文认为地幔热导率的选取对动力学模拟的结果有着较为显著的影响,相对于随温压的变化,热导率数值的差异对动力学数值模拟的结果影响更大,尤其是对于地幔熔融过程的影响.     

蚌埠-凤阳地区构造格架与找矿方向研究

在蚌埠-凤阳浅覆盖区,依据重磁异常进行地质构造解释,基本查明了构造格架,确定了新的找矿方向。研究结果表明,蚌埠复背斜构造轴线为向南凸出的弧形,西部地区走向北西西,与蚌埠隆起构造线一致,中部凤阳县城地区走向近东西,东部地区走向北东。郯庐断裂构造的左行牵引作用是引起轴线变化的主要原因。由此圈定了蚌埠岩体隐覆边界线和凤阳县-总铺构造岩浆热液活动带范围。编制了蚌埠-凤阳地区物探推断基岩构造纲要图。提出了蚌埠岩体接触带、构造岩浆热液活动带和重要断裂带交汇部位为找矿有利地区,为该区指明了找矿方向。     

2018年9月4日新疆伽师MS5.5地震序列及发震构造讨论

2018年9月4日新疆伽师发生M_S5.5地震,震中处于塔里木地块西北缘,位于1997~1998年伽师强震群震区内。此次伽师地震前发生了M_S4.7前震,截至9月30日最大余震震级为M_S4.6（M_L5.0）,初步判定为前-主-余型地震序列。序列精定位结果显示,余震沿近NE向展布,主震震源深度与1997~1998年伽师强震主震基本一致,发震断层陡立。本文从区域的构造环境、地震震源机制解和余震分布特征等方面分析认为,地震发生在伽师隐伏断裂东南端部,为1997~1998年伽师强震群震区的一次新的构造活动。序列参数、视应力等计算结果显示,伽师M_S5.5地震的预测最大余震震级与最大余震震级M_S4.6接近,表明序列最大余震已经发生。