Pseudo‐dynamic testing with substructuring at the ELSA Laboratory

The paper describes the distinctive features of the pseudo‐dynamic test method as implemented at the ELSA reaction‐wall facility. Both hardware and software aspects are considered. Particular attention is devoted to the digital control system and to a coupled numerical–experimental substructuring technique allowing realistic earthquake testing of very large structures. Mathematical and implementation details corresponding to this testing technique are given for both synchronous and asynchronous input motion. Selected test results illustrate the advantages of the presented features. Copyright © 2000 John Wiley & Sons, Ltd.     

3mm多普勒云雷达测量反演云内空气垂直速度的研究

垂直指向的W-波段大气云雷达(WACR)不仅测量云粒子的反射率因子Z, 而且测量多普勒速度谱。本文利用寿县气象站WACR在2008年11月1日一个时段的测量, 进行云内空气垂直速度反演试验。首先讨论个例中反射率、 Doppler平均速度及谱宽的分布特征及原因, 然后利用小粒子示踪法和改进的以小粒子示踪法为基础的粒子下降速度w0—反射率因子 (w0－Z) 关系法反演了云内空气垂直速度, 进而结合Doppler谱数据分析反演结果。结果显示: 小粒子示踪法在湍流较弱时能比较精确地反演空气垂直速度, 而湍流较强时, 湍流造成的误差不可忽略; 改进算法在湍流较强时能够减少湍流对反演结果的影响。     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

微机图形开发与动画制作技术在波动仿真中的应用

波动的图形仿真技术的正问题和反问题的解决有着极为重要的意义，目前这项技术在地震工程界应用得还非常少，本文简要介绍了作为波动图形仿真基础的计算机图形学和动画制作的基本概念以及常用方法，这些概念及方法有助于工程界人士方便地掌握绘制图形与制作动画的要领。     

Damping coefficients for soil–structure systems and evaluation of FEMA 440 subjected to pulse-like near-fault earthquakes

In this study, attempts are made to investigate the effects of inertial soil–structure interaction (SSI) on damping coefficients subjected to pulse-like near-fault ground motions. To this end, a suit of 91 pulse-like near-fault ground motions is adopted. The soil and superstructure are idealized employing cone model and single-degree-of-freedom (SDOF) oscillator, respectively. The results demonstrate that soil flexibility reduces and amplifies the damping coefficients for structural viscous damping levels higher and lower than 5%, respectively. The coefficients reach one for both acceleration and displacement responses in cases of dominant SSI effects. The effect of structure dimensions on damping confidents are found insignificant. Moreover, damping coefficients of displacement responses are higher than those of acceleration responses for both fixed-base and flexible-base systems. Evaluation of damping correction factor introduced by FEMA 440 shows its inefficiency to predict acceleration response of soil–structure systems under pulse-like near-fault ground motions. Soil flexibility makes the damping correction factor of moderate earthquakes more pronounced and a distinctive peak value is reported for cases with dominant SSI effects.     

Nonlinear response estimates of RC frames using linear analysis of SDOF systems

An approximate‐simple method for nonlinear response estimates of reinforced concrete frames subjected to near‐field and far‐field records is presented in this paper. The approximate method is based on equivalent single‐degree‐of‐freedom and linear multi‐degree‐of‐freedom models. In this procedure, the nonlinear maximum roof displacement is estimated using an effective period factor and elastic response spectrum with an equivalent damping. The effective period factor was proposed for far‐field and near‐field ground motion records. For regions of high seismicity, the maximum roof displacement can be estimated by applying an effective period factor of 2.3 and 2.1 for near‐field and far‐field records, respectively, and 9% damped displacement response spectrum. For regions of moderate seismicity, a lower effective period factor of 1.9 and 1.8, for near‐field and far‐field records, respectively, can be applied to estimate the maximum roof displacement. A relationship between linear and nonlinear response of multi‐degree‐of‐freedom systems was also proposed to obtain estimates of the maximum inter‐story drift of nonlinear responding reinforced concrete frames. In addition, the effects of number of ground motion records used in the analyses on the scatters of results were investigated. The required number of ground motions to produce a reliable response was proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Performance of base‐isolated reinforced concrete buildings under bidirectional seismic excitation considering pounding with retaining walls including friction effects

Seismic pounding of base‐isolated buildings has been mostly studied in the past assuming unidirectional excitation. Therefore, in this study, the effects of seismic pounding on the response of base‐isolated reinforced concrete buildings under bidirectional excitation are investigated. For this purpose, a three‐dimensional finite element model of a code‐compliant four‐story building is considered, where a newly developed contact element that accounts for friction and is capable of simulating pounding with retaining walls at the base, is used. Nonlinear behavior of the superstructure as well as the isolation system is considered. The performance of the building is evaluated separately for far‐fault non‐pulse‐like ground motions and near‐fault pulse‐like ground motions, which are weighted scaled to represent two levels of shaking viz. the design earthquake (DE) level and the risk‐targeted maximum considered earthquake (MCE_R) level. Nonlinear time‐history analyses are carried out considering lower bound as well as upper bound properties of isolators. The influence of separation distance between the building and the retaining walls at the base is also investigated. It is found that if pounding is avoided, the performance of the building is satisfactory in terms of limiting structural and nonstructural damage, under DE‐level motions and MCE_R‐level far‐fault motions, whereas unacceptably large demands are imposed by MCE_R‐level near‐fault motions. In the case of seismic pounding, MCE_R‐level near‐fault motions are found to be detrimental, where the effect of pounding is mostly concentrated at the first story. In addition, it is determined that considering unidirectional excitation instead of bidirectional excitation for MCE_R‐level near‐fault motions provides highly unconservative estimates of superstructure demands. Copyright © 2014 John Wiley & Sons, Ltd.     

基于机器学习的地震动特征提取与模拟以2021年云南漾濞6.4级地震为例

随着地震动数据数量的增长和质量的提高,将基于数据驱动的机器学习方法应用到地震动模拟中有重要意义。以2021年5月21日云南漾濞M_S6.4地震为例,利用主成分析方法从前震及余震地震动记录中提取特征母波时程,将地震动三要素作为模拟误差约束,在求解母波的线性组合系数时使用多目标优化算法寻优,最终找到帕累托最优解作为模拟目标台站记录时的组合系数,得到模拟地震动时程。结果表明:主成分析法在对实际地震动记录进行特征提取后,得到的特征母波时程可以在一定程度上保留原始数据的主要信息;考虑幅值、频谱和持时这三要素的角度去控制模拟误差,可以使得模拟的地震动时程更加接近真实记录。提出的基于特征提取的地震动模拟方法可以为基于小震数据合成大震地震动提供参考。     

Study on elastic response of structures to near-fault ground motions through record decomposition

Accelerograms recorded near active faults have some important characteristics that make them different from those recorded in far-fault regions. High-frequency components in acceleration records and long-period velocity pulses are among notable specifications of such ground motions. In this paper, a moving average filtering with appropriate cut-off frequency has been used to decompose the near-fault ground motions into two components having different frequency contents: first, Pulse-Type Record (PTR) that possesses long-period pulses; second, the relatively high-frequency BackGround Record (BGR), which does not include large velocity pulses. Comparing the results with those extracted through wavelet analysis shows that moving average filter is an appropriate and efficient tool for near-fault records decomposition. The method is applied to decompose a suite of 91 selected near-fault records and the elastic response of structures is examined through their response to the decomposed parts. The results emphasizes that in contrast with ordinary far-fault earthquake records, response spectra of near-fault ground motions typically have two distinct local peaks, which are representatives of the high- and low-frequency components, i.e., BGR and PTR, respectively. Moreover, a threshold period is identified below which the response of structures is dominated by BGR while PTR controls the response of structures with periods longer than this period.