苏南江阴-嘉定断裂带断层泥扫描电镜研究及其地震地质意义

本文在分析苏南江阴-嘉定北西向断裂带宏观构造特征的基础上,对断层泥中石英碎砾表面溶蚀结构进行了扫描电子显微镜研究,并与郯-庐断裂带山东段断层泥进行了电镜图象的对比分析,从而确定了江阴-嘉定断裂带的相对(最新)活动年代及其地震活动性;此外,就江阴-嘉定断裂带不同区段活动年代差异及其纵向迁移模式、断层泥石英碎砾表面结构电镜图象聚类的概率分布特征及其地震地质意义等有关问题展开了讨论     

Emplacement age and isotope geochemistry of Sung Valley alkaline–carbonatite complex, Shillong Plateau, northeastern India: implications for primary carbonate melt and genesis of the associated silicate rocks

The early Cretaceous (Albian–Aptian) Sung Valley ultramafic–alkaline–carbonatite complex is one of several alkaline intrusions that occur in the Shillong Plateau, India. This complex comprises calcite carbonatite and closely associated ultramafic (serpentinized peridotite, pyroxenite and melilitolite) and alkaline rocks (ijolite and nepheline syenite). Field relationship and geochemical characteristics of these rocks do not support a genetic link between carbonatite and associated silicate rocks. There is geochemical evidence that pyroxenite, melilitolite and ijolite of the complex are genetically related. Stable (C and O) and radiogenic (Nd and Sr) isotope data clearly indicate a mantle origin for the carbonatite samples. The carbonatite Nd (+0.7 to +1.8) and Sr (+4.7 to +7.0) compositions overlap the field for Kerguelen ocean island basalts. One sample of ijolite has Nd and Sr isotopic compositions that also plot within the field for Kerguelen ocean island basalts, whereas the other silicate–carbonatite samples indicate involvement with an enriched component. These geochemical and isotopic data indicate that the rocks of the Sung Valley complex were derived from and interacted with an isotopically heterogeneous subcontinental mantle and is consistent with interaction of a mantle plume (e.g. Kerguelen plume) with lithosphere. A U–Pb perovskite age of 115.1±5.1 Ma obtained for a sample of Sung Valley ijolite also supports a temporal link to the Kerguelen plume. The observed geochemical characteristics of the carbonatite rocks indicate derivation by low-degree partial melting (0.1%) of carbonated mantle peridotite. This melt, containing a substantial amount of alkali elements, interacted with peridotite to form metasomatic clinopyroxene and olivine. This process could progressively metasomatize lherzolite to form alkaline wehrlite.     

The significance of stretching lineations in terms of progressive deformation and finite strain

Abstract

For a given increment of deformation, stretching lineations can be defined either by old grains or by new grains.

Progressive strain accumulated in a matrix causes reorientation of old grains. The velocity field acting within a grain depends on the degree of non-coaxiality of the progressive strain in the matrix, and on the competence contrast between grain and matrix (e.g. Lister & Williams, 1983). Deformed populations of old grains do not systematically track the principal directions of finite stretch; this depends on the mechanical behavior of the grains. On the other hand, these populations may be good markers of finite strain magnitude, provided that the initial distribution is known.

In contrast, the statistical shape orientation distribution of population of new grains cannot be related in a simple way to the finite strain magnitude, but their preferred orientation is considered to be the best indicator of the principal directions of finite stretch.

An example is considered from the schistes lustrés near Kenestrelle (Val Chisone, Western Alps), where the observed mineral lineation is attributed to a late E-W stretching event in the alpine orogenic history.     

叠合盆地储层油气包裹体GOI成因与应用探讨——以准噶尔盆地莫索湾地区为例

在准噶尔盆地莫索湾地区选取了5口具有不同油气显示级别的典型探井,通过对48块岩心样品作精细的储层油气包裹体GOI组成分析,尝试探讨了在复杂油气充注情况下,叠合盆地油气包裹体GOI组成的成因。结果表明,含油气流体的充注强度是主因。但由于油气成藏的多期复合、油气水界面的多期变迁,决定了我们在研究过程中不可以直接借鉴文献中提出的1%和5%等指标来判断油气水层,而是应该结合地质背景,首先仔细分析其成因,再深入讨论应用。文中利用GOI对莫索湾地区的油气运移进行了讨论,取得了良好效果,表明其在叠合盆地油气运移研究中具有一定应用前景。     

Fluid inclusions in mantle xenoliths

Fluid inclusions in olivine and pyroxene in mantle-derived ultramafic xenoliths in volcanic rocks contain abundant CO₂-rich fluid inclusions, as well as inclusions of silicate glass, solidified metal sulphide melt and carbonates. Such inclusions represent accidentally trapped samples of fluid- and melt phases present in the upper mantle, and are as such of unique importance for the understanding of mineral–fluid–melt interaction processes in the mantle. Minor volatile species in CO₂-rich fluid inclusions include N₂, CO, SO₂, H₂O and noble gases. In some xenoliths sampled from hydrated mantle-wedges above active subduction zones, water may actually be a dominant fluid species. The distribution of minor volatile species in inclusion fluids can provide information on the oxidation state of the upper mantle, on mantle degassing processes and on recycling of subducted material to the mantle. Melt inclusions in ultramafic xenoliths give information on silicate–sulphide–carbonatite immiscibility relationships within the upper mantle. Recent melt-inclusion studies have indicated that highly silicic melts can coexist with mantle peridotite mineral assemblages. Although trapping-pressures up to 1.4 GPa can be derived from fluid inclusion data, few CO₂-rich fluid inclusions preserve a density representing their initial trapping in the upper mantle, because of leakage or stretching during transport to the surface. However, the distribution of fluid density in populations of modified inclusions may preserve information on volcanic plumbing systems not easily available from their host minerals. As fluid and melt inclusions are integral parts of the phase assemblages of their host xenoliths, and thus of the upper mantle itself, the authors of this review strongly recommend that their study is included in any research project relating to mantle xenoliths.     

Testing the applicability of standardised growth curves (SGCs) for OSL signals of quartz grains from the Yangtze Delta,China

The standardised growth curve (SGC) technique has the potential to save instrument time for equivalent dose (D_e) determination when applying single-aliquot regenerative-dose (SAR) protocol during optically stimulated luminescence (OSL) measurements. In this study, we test the applicability of two commonly used SGC procedures for OSL signals of quartz grains from aqueous deposits of the Yangtze Delta in China, which have been reported for weak luminescence signals and suffering from partial bleaching. Multiple silt-sized and sand-sized fractions of quartz samples from eight cores are used to construct SGCs by test dose standardisation (TD-SGC) and least-squares normalisation (LS-SGC), respectively. Three strategies, i.e. region-specific (SGC_R), region with core-specific (SGC_R + C) and core-specific (SGC_C), are adopted to categorise these normalised data into different SGC datasets. The large variability of dose response signals is substantially reduced by the SGC procedures for most of these datasets. Hence, common SGCs for a variety of samples from the Yangtze Delta can be established, irrespective of their distinctive particle sizes and luminescence characteristics. The D_e values are then estimated using both TD-SGC and LS-SGC procedures for samples from a specific core. Comparing to the full SAR protocol, the TD-SGC procedure roughly gives reproducible D_e estimates lower than ∼100 Gy while the LS-SGC procedure derives generally consistent D_e estimates of up to ∼230 Gy. Although LS-SGC_C and LS-SGC_R + C procedures replicate the most consistent D_e values, the LS-SGC_R procedure performs better in efficiency with a slightly less accuracy. In addition to careful comparison of LS-SGC and full SAR procedures, we suggest that a synchronous ratio derived by the chosen regenerative dose and its response signal for re-normalisation can be used to predict the LS-SGC D_e reliability on samples from similar sedimentary environments.     

Elemental and Sr–Nd isotopic compositional disparity of riverine sediments around the Yellow Sea: Constraints from grain-size and chemical partitioning

To obtain a better understanding of the source compositions of the river sediments around the Yellow Sea and their relationship with source rocks, elements and strontium-neodymium (Sr–Nd) isotopes of different grain-sizes (silt and clay populations) and chemical (labile and residual phases) fractionations in riverine sediments were studied extensively. These results clearly revealed a systematic compositional disparity between Korean river (KR) and Chinese river (CR) sediments, especially in the residual (detrital) fraction. The geochemical dissimilarity between these might reflect inherited signatures of their source rocks but with minor control from chemical weathering. In particular, the remarkable enrichment of some elements (iron (Fe) and magnesium (Mg)) and the behavior of large ion lithophile elements (e.g., barium (Ba), potassium (K) and Sr) during weathering as well as less-radiogenic Sr isotopic compositions implies that CR sediments might be weathering products of relatively more mafic rocks, with abundant ferromagnesian and plagioclase feldspar minerals, compared with KR sediments derived from silicic granites with relatively higher quartz and potassium feldspar contents. This different petrological rationale is clearly evident in an A–CN–K diagram, which estimated the source rock of CR sediments as granodioritic, a composition that reflects accurately the average composition of weathered continental crust in China. The recognition of such geochemical systematics in two river sediments, especially in grain-size and chemically partitioned data, may contribute to the establishment of provenance tracers for the Yellow Sea and East China Sea sediments with multi-sources as well the dust deposition in the western Pacific.     

云南西北部丽江—剑川地区古近纪宝相寺组 石英砂颗粒表面特征

石英砂具有丰富的颗粒表面特征,是判别沉积环境的重要标志。利用扫描电镜对云南丽江—剑川地区宝相寺组(E2b)的石英砂颗粒表面特征进行了系统分析:下部样品具水成特征,中部样品具风成特征,上部样品则具经水流改造后的风成特征。结合野外观察结果,从宝相寺组石英砂颗粒表面特征的变化规律可以看出,下部为近源洪积环境、中部为风成沙丘环境、上部为湖泊环境。其中中部样品的石英砂磨圆、分选极好,普遍具有标准的碟形、新月形撞击坑和毛玻璃化表面,是典型的沙漠砂沉积。     

Nickel Isotope Variations in Terrestrial Silicate Rocks and Geological Reference Materials Measured by MC‐ICP‐MS

Although initial studies have demonstrated the applicability of Ni isotopes for cosmochemistry and as a potential biosignature, the Ni isotope composition of terrestrial igneous and sedimentary rocks, and ore deposits remains poorly known. Our contribution is fourfold: (a) to detail an analytical procedure for Ni isotope determination, (b) to determine the Ni isotope composition of various geological reference materials, (c) to assess the isotope composition of the Bulk Silicate Earth relative to the Ni isotope reference material NIST SRM 986 and (d) to report the range of mass‐dependent Ni isotope fractionations in magmatic rocks and ore deposits. After purification through a two‐stage chromatography procedure, Ni isotope ratios were measured by MC‐ICP‐MS and were corrected for instrumental mass bias using a double‐spike correction method. Measurement precision (two standard error of the mean) was between 0.02 and 0.04‰, and intermediate measurement precision for NIST SRM 986 was 0.05‰ (2s). Igneous‐ and mantle‐derived rocks displayed a restricted range of δ^60/58Ni values between ?0.13 and +0.16‰, suggesting an average BSE composition of +0.05‰. Manganese nodules (Nod A1; P1), shale (SDO‐1), coal (CLB‐1) and a metal‐contaminated soil (NIST SRM 2711) showed positive values ranging between +0.14 and +1.06‰, whereas komatiite‐hosted Ni‐rich sulfides varied from ?0.10 to ?1.03‰.     

云南西北部丽江—剑川地区古近纪宝相寺组石英砂颗粒表面特征

石英砂具有丰富的颗粒表面特征,是判别沉积环境的重要标志。利用扫描电镜对云南丽江—剑川地区宝相寺组（E2b）的石英砂颗粒表面特征进行了系统分析：下部样品具水成特征,中部样品具风成特征,上部样品则具经水流改造后的风成特征。结合野外观察结果,从宝相寺组石英砂颗粒表面特征的变化规律可以看出,下部为近源洪积环境、中部为风成沙丘环境、上部为湖泊环境。其中中部样品的石英砂磨圆、分选极好,普遍具有标准的碟形、新月形撞击坑和毛玻璃化表面,是典型的沙漠砂沉积。