亚洲MAGSAT卫星磁异常图

使用２０多万个ＭＡＧＳＡＴ卫星磁测数据，编绘亚洲卫星标量（△Ｆ）和矢量（△Ｘ，△ｙ，△Ｚ）磁异常图（２０°ｓ－６０°Ｎ，５０°Ｅ－１６０°Ｅ）．为了提取岩石层卫星磁异常，首先对ＭＡＧＳＡＴ卫星数据进行了筛选，然后进行主磁场、磁层场、电离层场和感应场改正，并消除虚假测点．将卫星数据分成黎明组、黄昏组和联合组，分别绘制相应的卫星磁异常图．根据１°×１°的网点值，用计算机编绘亚洲卫星磁异常图．初步分析了卫星磁异常与大地构造的关系．     

结合卫星像影分析水库地震的形成原因

本文应用卫星影像分析了我国几个水库诱发地震震例,提出了库区内应力叠加模式,对水库地震的成因,做了探讨。     

便携式光电望远镜用于流星暴观测的探讨

本文介绍了便携式人卫光电望远镜的主要性能特点,探讨了将其应用于狮子座流星暴观测的可能性。     

Lunisolar Apsidal Resonances at low Satellite Orbits

Eccentricity resonances between the secular motion of an Earth satellite's orbit and the longitudes of the Sun and the Moon are studied within a Hamiltonian framework. The problem is approximated in a traditional manner, with the Earth's potential including only the second zonal harmonic, and a Hill‐type approximation for perturbing bodies. For a family of 10 resonances, stable and unstable points are identified and libration widths are estimated. Numerical values are given for the maximum variation of eccentricity available at each resonance. The respective amplitudes of the perigee heights' librations range from 2 to 750 km. The resonances of the solar origin are generally stronger than their lunar counterparts. This revised version was published online in July 2006 with corrections to the Cover Date.     

The gravitational perturbation spectrum in linear satellite theory

A new method for calculating the perturbation spectrum in the framework of Kaula's linear satellite theory (LST) is introduced. The novelty of this approach consists in using recent results on the spectral decomposition of the perturbation frequencies in LST to provide a closed formulation for the amplitude and the phase of each line in the perturbation spectrum. The theory presented here can be applied to perturbations in the elements or in the radial and transverse directions due to the geopotential or to the tides. Separate algorithms are developed for application to orbits with circulating or frozen perigee.     

Evaluation of pre-CHAMP gravity models `GRIM5-S1' and `GRIM5-C1' with satellite crossover altimetry

 The new GFZ/GRGS gravity field models GRIM5-S1 and GRIM5-C1, currently used as initial models for the CHAMP mission, have been compared with other recent models (JGM 3, EGM 96) for radial orbit accuracy (by means of latitude lumped coefficients) in computations on altimetry satellite orbits. The bases for accuracy judgements are multi-year averages of crossover sea height differences from Geosat and ERS 1/2 missions. This radially sensitive data is fully independent of the data used to develop these gravity models. There is good agreement between the observed differences in all of the world's oceans and projections of the same errors from the scaled covariance matrix of their harmonic geopotential coefficients. It was found that the tentative scale factor of five for the formal standard deviations of the harmonic coefficients of the new GRIM fields is justified, i.e. the accuracy estimates, provided together with the GRIM geopotential coefficients, are realistic. Received: 20 February 2001 / Accepted: 24 October 2001     

工业CT技术在卫星产品检测中的应用

卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。     

利用场地观测计算地表通量

高原地表的感热和潜热通量在亚洲季风系统中有很重要的作用。由于高原地域辽阔，且自然环境较严酷，不利于建立完善的地面观测系统。因此，卫星遥感观测就成为测算高原整体感热和潜热通量的有效工具。地面场地的观测结果作为地表通量的真实值，对于卫星遥感测算是非常重要的。它也为构建陆面—大气模型提供了科学依据，是卫星资料的资料同化系统中的重要组成部分。 计算场地热量通量有几种不同的处理方法。最简单的方法利用有效的观测和试验的参数，可以给出稳定连续的估计。愈精确的Bowen比或者廓线的观测能给出愈精确的信息。综合了湍流测量及辐射测量、土壤热通量的观测结果的估计对陆面—大气相互作用进行了详细的描述，以适应模式的发展。从1998年开始，这些方法联合应用到青藏高原；场地通量观测方面的成果以及目前对其理解将在本文中做一概述。